A Flip UltraHD camera that runs on two AA cells can stop a shoot early when the cells run flat, and that is why choosing best batteries for flip video cameras matters more than it first seems. This guide compares six rechargeable AA NiMH packs by capacity, recharge cycles, and charge retention, so you can pick a set that fits how often you record.

Quick verdict

The short answer is simple: a Flip camera that runs on two AA cells needs high capacity NiMH cells, a spare set, and a charger you trust. The six packs below cover high capacity, long cycle life, and low self discharge, so you can match a pack to how often you record video.

Product Type Best for Key spec Main limit
Panasonic eneloop pro AA, 8-pack NiMH AA Long recording sessions 2550 mAh, 1.2 V Lower cycle count than standard eneloop
Panasonic eneloop AA, 4-pack NiMH AA Frequent reuse over years 2000 mAh, up to 2100 cycles Lower capacity than eneloop pro
EBL AA, 8-pack with case NiMH AA High capacity on a budget 2800 mAh, 1.2 V Charge retention figure is lower
Amazon Basics AA NiMH High-Capacity, 24-pack NiMH AA Many spares for a household 2400 mAh, up to 400 cycles Charge retention drops to 50 percent in 1 year
Energizer Recharge Power Plus AA, 4-pack NiMH AA Everyday camera use 2300 mAh, up to 1000 cycles Lowest capacity in this guide
Duracell Rechargeable AA, 4-pack NiMH AA Heavy use devices 2500 mAh, up to 400 cycles Shorter stated storage guarantee than some rivals

If you record often and want the longest time between charges, start with the Panasonic eneloop pro pack or the EBL pack, because both list high capacity and suit high drain devices. If you record less often but want cells that last through many recharges, the standard Panasonic eneloop pack is the clear pick, with up to 2100 recharge cycles listed by the maker. For a household with several devices, the Amazon Basics 24-pack gives you many spares in one purchase, while the Energizer and Duracell 4-packs suit a single camera and a simple rotation of two cells in use and two cells charging.

How we selected the best batteries for flip video cameras

We compared only rechargeable AA cells with maker listed capacity, voltage, recharge cycles, and charge retention from pages we opened. We favored cells suited to cameras, clear pack sizes, and plain specs, and we left out any cell whose key figures came only from a search snippet.

A Flip UltraHD camera in the 4 GB form can run on two AA batteries, and the maker notes that other batteries must be charged outside the camcorder. That detail shapes the whole guide. You need cells that hold a charge between shoots, cells that recharge many times without fuss, and a spare pair ready to swap in when the first pair runs flat. Single use cells can work in a pinch, but they turn every shoot into a fresh purchase, so this guide stays with rechargeable NiMH AA cells.

Capacity in milliamp hours gives a useful first comparison, but it does not tell the whole story. A 2800 mAh cell lists more stored charge than a 2000 mAh cell, yet the lower capacity cell may keep its charge longer in a drawer or survive far more recharge cycles. That is why each product section below lists capacity, recharge cycles, and charge retention side by side, and why the buying guide explains how to weigh those three figures for video use.

We also looked at pack size and practical details. A Flip camera takes two AA cells at a time, so a 4-pack gives you one pair in the camera and one pair ready to swap, while an 8-pack or a 24-pack supports a larger rotation. A storage case helps keep spare cells together and keeps the positive and negative ends from touching metal objects in a bag. Charger compatibility matters too, because all six packs in this guide work with NiMH chargers, and several makers state that plainly on the product page.

Six rechargeable AA packs compared

Each pack below is a rechargeable AA NiMH set with a maker listed capacity and a clear pack size. Read the capacity, the recharge count, and the charge retention together, because a Flip camera draws steady power while it records video and a weak pair ends a shoot early.

Panasonic eneloop pro AA, 8-pack

The Panasonic eneloop pro AA 8-pack leads this guide on capacity among the Panasonic options, with each cell listed at 2550 mAh and 1.2 V. The maker describes these NiMH cells as high capacity cells for high drain devices, and the pack holds eight AA cells, which gives you four pairs to rotate through a camera and a charger.

The maker lists the cells as pre-charged using solar power, so they arrive ready to use straight from the packet. The listing also states that the cells hold 85 percent of their charge after 1 year of storage, which matters for a Flip camera that may sit unused for weeks between shoots. The cells are listed as rechargeable hundreds of times, and the maker notes that they are made in Japan. The model number listed for this 8-pack is BK-3HCCE/8BT.

For video use, the appeal is direct. A Flip camera draws power without pause while it records, and a high capacity cell gives you more recording time before a swap. The 8-pack size also helps, because you can keep two cells in the camera, two cells charged and ready, and the rest in rotation. That setup suits a day of filming far better than a single pair with no backup.

The main trade off is cycle life. Standard eneloop cells list far more recharge cycles than the pro cells, so the pro pack suits people who value recording time per charge over the total number of recharges across many years. If you shoot often and want the longest stretch before a battery change, that trade off makes sense. If you shoot rarely and want cells that last through the most cycles, the standard eneloop pack below may fit better.

  • Pros: High 2550 mAh capacity for longer recording stretches.
  • Pros: Pre-charged and ready to use from the packet.
  • Pros: Holds 85 percent of charge after 1 year of storage.
  • Pros: Eight cells support a useful rotation for filming days.
  • Cons: Maker lists recharge as hundreds of times, not a higher cycle count.
  • Cons: High capacity cells may suit heavy use more than light use.

Buy if you record long clips, film often, and want the most capacity from a Panasonic AA cell in this guide. Skip if you use the camera only a few times a year and would rather have the highest recharge cycle count on the list.

Panasonic eneloop AA, 4-pack

The Panasonic eneloop AA 4-pack, model BK-3MCCE/4BN, lists a typical capacity of 2000 mAh and a minimum capacity of 1900 mAh, with a nominal voltage of 1.2 V. The maker lists up to 2100 recharge cycles, which is the highest cycle count in this guide by a wide margin, and that figure makes this pack the long term reuse pick.

Charge retention is another strength. The maker states that the cells retain up to 70 percent of their power even after 10 years in storage, and the listing gives an operating temperature range of minus 20 degrees C to 50 degrees C, which the maker also gives as minus 4 degrees F to 122 degrees F. The cells are pre-charged with solar energy in Japan, and the pack holds four AA cells, which is one pair for the camera and one pair in reserve.

For a Flip camera, the lower capacity means you may swap cells sooner than with the pro pack, but the cycle count and the long storage retention balance that point. A camera that sits in a drawer for months still needs cells that hold a useful charge, and this pack is built for that pattern. The 4-pack size also keeps the purchase simple, and the cells work in a standard NiMH charger.

The maker notes that the cells have no memory effect, so you can recharge them at any point without waiting for a full discharge. That habit fits video use well, because you can top up the spare pair after a shoot and put them back in the drawer ready for the next one. The cells are also listed for high drain equipment such as camera flash units, which points to steady power delivery under load.

  • Pros: Up to 2100 recharge cycles, the highest count here.
  • Pros: Retains up to 70 percent of charge after 10 years of storage.
  • Pros: Pre-charged and ready to use from the packet.
  • Pros: Wide operating temperature range listed by the maker.
  • Cons: 2000 mAh typical capacity is lower than the pro and EBL packs.
  • Cons: Four cells give only one spare pair for a camera.

Buy if you want cells that recharge many times, hold a charge in storage, and suit a camera used on and off over years. Skip if your main need is the longest single recording stretch and you are willing to trade cycle count for capacity.

EBL AA, 8-pack with case

The EBL AA 8-pack lists the highest capacity in this guide, at 2800 mAh per cell, with a nominal voltage of 1.2 V and NiMH chemistry. The pack holds eight AA batteries and includes a storage case, which keeps spare cells organized and ready to carry to a shoot.

The listing gives a nominal energy figure of about 3.36 Wh per battery, and it states that the low self discharge design helps the batteries retain up to 75 percent of their capacity after extended storage. The listing also gives charging guidance for a compatible NiMH charger, with a standard charge of 210 mA for about 16 hours, a quick charge of 420 mA for about 7 hours, and a rapid charge of 1050 mA for about 2.4 hours. Each battery weighs about 24.7 g, and the listed size is about 50.3 by 14.2 mm.

For Flip video use, the 2800 mAh capacity is the headline. More stored charge per cell means more recording time before the camera needs a swap, and the 8-pack gives you four pairs to rotate. The storage case is a practical bonus, because a Flip camera bag often holds cables, a tripod plate, and spare cells, and loose cells can roll away or touch metal objects.

The charge retention figure is lower than the Panasonic figures in this guide, so a pair left in a drawer for a long stretch may hold less charge than a pair of eneloop cells stored for the same time. That point matters less if you charge the spare pair the night before a shoot, and the rapid charge option helps when time is short. The listing also notes improved low temperature performance, which suits outdoor filming in cool weather.

  • Pros: Highest capacity here at 2800 mAh per cell.
  • Pros: Eight cells plus a storage case for easy carrying.
  • Pros: Rapid charge listed at 1050 mA for about 2.4 hours.
  • Pros: Listed for digital cameras and other high drain devices.
  • Cons: Retains up to 75 percent of capacity after extended storage.
  • Cons: No recharge cycle count stated on the opened page.

Buy if you want the most capacity per cell, a useful case, and an 8-pack rotation for filming days. Skip if you leave cells unused for many months at a time and want the strongest charge retention figure in this guide.

Amazon Basics AA NiMH High-Capacity, 24-pack

The Amazon Basics AA NiMH High-Capacity 24-pack lists 2400 mAh per cell, a voltage of 1.2 V, and NiMH chemistry. The model number listed is 240AAHCB, and the pack holds 24 AA batteries, which is the largest pack size in this guide and suits a household with many battery powered devices.

The maker states that the cells can be recharged up to 400 times with minimal power loss, and that they maintain 50 percent capacity for 1 year. The shelf life is listed as up to 5 years, and the cells arrive pre-charged and ready to use. The listed item size is 0.56 by 0.56 by 1.97 inches, and the listed item weight is 27.22 g.

For a Flip camera, the 24-pack changes the routine. You can keep several pairs charged and ready, rotate them through the camera, and still have spares for a remote control or a flashlight. That setup suits a family camera that passes between users, or a creator who films often and dislikes running out of charged cells mid shoot.

The trade off is charge retention. The maker lists 50 percent capacity after 1 year, which is lower than the Panasonic and EBL figures in this guide, so a pair stored for a year may need a fresh charge before a shoot. The recharge count of up to 400 times is also lower than the Panasonic standard and Energizer figures here. Those limits matter less when you have many spares and a regular charging habit, because you can top up a pair the night before filming.

  • Pros: 2400 mAh capacity suits high drain devices.
  • Pros: 24 cells give a large rotation for many devices.
  • Pros: Pre-charged and ready to use from the packet.
  • Pros: Shelf life listed as up to 5 years.
  • Cons: Maintains 50 percent capacity for 1 year.
  • Cons: Recharge count of up to 400 times is lower than some rivals.

Buy if you want many spares in one purchase and you charge cells often. Skip if you store cells for long stretches and want the strongest charge retention, or if a smaller pack fits your camera better.

Energizer Recharge Power Plus AA, 4-pack

The Energizer Recharge Power Plus AA 4-pack, model NH15BP-4, lists a capacity of 2300 mAh and a voltage of 1.2 V, with NiMH chemistry. The pack holds four AA batteries, which gives you one pair for the Flip camera and one pair ready to swap in when the first pair runs flat.

The maker states that each battery can be recharged up to 1000 times, which is the second highest cycle count in this guide after the standard eneloop pack. The cells come pre-charged and ready to use, and the maker notes that they are made with 22 percent recycled materials. The listing describes the cells as a reliable and economical choice for devices from remotes to gaming controllers, and it lists camera batteries among the uses.

For Flip video use, the 1000 cycle count is the key point. A camera used often will cycle through pairs many times, and a cell that survives many recharges keeps the routine simple and avoids frequent replacement. The 2300 mAh capacity sits in the middle of this guide, above the standard eneloop pack and below the Duracell, Amazon Basics, and EBL packs, so recording time per charge should feel solid for short and medium clips.

The 4-pack size keeps the purchase focused on one camera, and the cells work with an Energizer charger and with other NiMH chargers. The main limit is capacity, because a longer filming day may need a second swap sooner than a higher capacity pack would. Keeping the spare pair charged and ready covers that gap, and the high cycle count means the spare pair will stay useful for many shoots.

  • Pros: Rechargeable up to 1000 times, a strong cycle count.
  • Pros: Pre-charged and ready to use from the packet.
  • Pros: Made with 22 percent recycled materials.
  • Pros: Four cells give a simple one pair in use, one pair spare routine.
  • Cons: 2300 mAh capacity is the lowest in this guide.
  • Cons: Four cells may feel thin for a long filming day.

Buy if you film often, want a high recharge count, and like a simple 4-pack rotation. Skip if you need the longest time per charge and would rather carry a higher capacity pack.

Duracell Rechargeable AA, 4-pack

The Duracell Rechargeable AA 4-pack lists a capacity of 2500 mAh and NiMH chemistry, with four AA batteries in the pack. The maker states that the cells can be recharged up to 400 times, and that they work in any NiMH charger, which keeps charger choice simple for a Flip camera owner.

The listing states that the cells come pre-charged and ready to use, and that they will hold a charge for up to 1 year when not in use. The maker guarantees each cell to last 10 years in storage, or 400 charges, whichever comes first, and the listing notes Long-Life Ion Core technology for heavy use devices. The pack is listed for video game controllers, wireless electronics, baby monitors, and other heavy use devices.

For Flip video use, the 2500 mAh capacity is a strong point, sitting just below the eneloop pro figure and above the Amazon Basics and Energizer figures in this guide. That capacity suits steady video recording, where the camera draws power without a break. The 4-pack gives you a pair in the camera and a pair in reserve, which is the simplest rotation for a single camera.

The recharge count of up to 400 times is lower than the Panasonic standard and Energizer counts, so a heavy user may cycle through the pack sooner in terms of total recharges. The storage guarantee of 10 years still gives confidence for a camera kept for occasional shoots, and the hold charge figure of up to 1 year means a charged pair should still have useful power after months in a drawer.

  • Pros: High 2500 mAh capacity for steady video recording.
  • Pros: Pre-charged and ready to use from the packet.
  • Pros: Holds a charge for up to 1 year when not in use.
  • Pros: Works in any NiMH charger, per the maker listing.
  • Cons: Recharge count of up to 400 times is lower than some rivals.
  • Cons: Four cells give only one spare pair for a camera.

Buy if you want high capacity in a simple 4-pack and you film in steady bursts. Skip if you cycle cells very often and want the highest recharge count in this guide.

Buying guide

Picking AA cells for a Flip camera is simpler than it looks once you know the three figures that matter most. Capacity sets how long a pair lasts in the camera, charge retention sets how much power remains after storage, and recharge cycles set how many times you can reuse a pair.

Capacity and charge retention compared

Capacity in milliamp hours is the first figure to compare, because a Flip camera draws steady power while it records. A 2800 mAh cell lists more stored charge than a 2000 mAh cell, so it should run longer before a swap, all else being equal, and that gap can matter on a filming day.

Charge retention matters just as much, because a Flip camera may sit unused for weeks. The Panasonic eneloop pro pack lists 85 percent charge after 1 year, while the standard eneloop pack lists 70 percent after 10 years, and the EBL pack lists up to 75 percent after extended storage. Compare those figures with the capacity figure, not in place of it, and charge the spare pair before a planned shoot.

Think of capacity as the length of one recording stretch and retention as the readiness of a stored pair. A high capacity pair that has sat for a year may still hold less useful charge than a lower capacity pair with stronger retention. For that reason, keep the pair you plan to use charged and ready, and treat a stored pair as a backup that needs a check before filming.

Recharge cycles and long term value

Recharge cycles tell you how many times a maker lists a cell as reusable, and the range in this guide is wide. The standard Panasonic eneloop pack lists up to 2100 cycles, the Energizer pack lists up to 1000 cycles, and the Amazon Basics and Duracell packs list up to 400 cycles.

A high cycle count suits a camera used every week, because the cells will go through many charge and discharge rounds in a year. A lower cycle count can still suit a camera used a few times a month, because the cells may last for years before they reach the listed count. Match the cycle count to your filming habit, not to a vague idea of quality, and keep a spare pair so a tired pair never ends a shoot.

Rotation also helps cycle life in practice. Label two pairs, use one pair while the other charges, and swap them in turn. That habit spreads the work across more cells, keeps a charged pair ready, and makes it easy to spot a pair that no longer holds a charge as well as the rest.

Low self discharge and storage between shoots

Low self discharge means a charged cell loses power slowly when it sits unused, and that trait matters for a Flip camera that may wait weeks between shoots. All six packs in this guide are NiMH cells with a low self discharge design, but the stated retention figures differ, so read them before you buy.

Storage habits matter too. Keep spare cells in a case, away from heat and damp, and keep the positive and negative ends from touching metal objects in a bag. A case also keeps pairs together, so you do not mix a fresh pair with a half used pair. The EBL pack includes a case, while the other packs suit a small case bought separately.

Before a planned shoot, charge the pair you plan to use, even if the cells were charged weeks ago. That simple step removes doubt, and it costs little time when you use a NiMH charger with a clear charge indicator. After a shoot, recharge the used pair promptly, so the next shoot starts with a full set.

Chargers, spares, and rotation for video days

A Flip UltraHD camera can charge its included batteries through a powered USB port, but other batteries must be charged outside the camcorder. That means an external NiMH charger is part of the kit, not an extra, and the charger you pick should suit AA cells and show when charging is done.

Carry at least one spare pair for a short shoot and two spare pairs for a long day. A 4-pack gives you one spare pair, an 8-pack gives you three spare pairs, and a 24-pack gives you many pairs for a household. Choose the pack size that matches how long you film and how often you can recharge between sessions.

Rotation keeps the routine simple. Use pair one in the camera, keep pair two charged in the case, and put pair one on the charger as soon as you swap. That loop means you always have a charged pair ready, and you never have to wait for a charge in the middle of a filming session.

Size, voltage, and fit in the camera

All six packs in this guide are standard AA cells, so they fit the AA battery compartment of a Flip UltraHD camera that takes two AA cells. The listed voltage for most packs here is 1.2 V, which is the normal voltage for NiMH rechargeable AA cells, and the maker listings for those packs state that voltage plainly.

Check the battery compartment before you buy, because some Flip models use a built in lithium ion pack or three AAA cells instead of two AA cells. The Macworld review of the Flip UltraHD notes that the camera can use the rechargeable batteries included with the camera or two AA batteries, and that other batteries must be charged outside the camcorder. That note applies to the AA form, not to every Flip model.

Fit also means polarity. Insert each cell with the positive and negative ends lined up with the marks in the compartment, and do not mix rechargeable cells with single use cells in the same camera. Mixing types can lead to uneven power delivery, and the maker guidance on several packs in this guide warns against mixing brands, types, or capacities in one device.

FAQ

These answers cover the questions Flip camera owners ask most often about rechargeable AA cells. Each answer uses the maker listed figures from the packs in this guide, plus plain buying advice for video use and for carrying spare pairs on a filming day.

How long do batteries for flip video cameras last on a charge?

Recording time on one charge depends on capacity, the age of the cells, the temperature, and how the camera is used. A higher capacity cell, such as the 2800 mAh EBL pack or the 2550 mAh eneloop pro pack, lists more stored charge than a 2000 mAh cell, so it should run longer before a swap.

Storage time also affects the answer. A pair charged a month ago may hold less charge than a pair charged last night, because NiMH cells lose charge slowly in storage. The retention figures in this guide range from 50 percent after 1 year for the Amazon Basics pack to 85 percent after 1 year for the eneloop pro pack, so charge the pair you plan to use before a shoot.

The practical answer is to carry a spare pair. With two pairs in rotation, a short clip session needs only one pair, and a long session can continue after a quick swap. That habit matters more than any single capacity figure, because a swap takes seconds and a dead camera ends a shoot.

Can I use regular alkaline AA batteries in a Flip camera?

A Flip UltraHD camera that takes two AA cells can run on standard AA batteries in a pinch, and the Macworld review notes that the camera can use two AA batteries as an option. Single use alkaline cells can get you through a shoot when no charged NiMH cells are available, and they need no charger.

Rechargeable NiMH cells suit regular filming better, because you can recharge them many times and keep a rotation ready. The packs in this guide list recharge counts from up to 400 times to up to 2100 times, so a single set can cover many shoots. Single use cells also cost more over time when you film often, and they create more waste.

Do not mix alkaline cells with rechargeable cells in the same camera, and do not try to recharge single use cells. Use one type at a time, keep the spare pair of the same type, and store each type in its own case so you do not mix them by mistake.

Do rechargeable AA batteries need a special charger?

Rechargeable AA cells in this guide need a NiMH charger, because they are NiMH cells with a nominal voltage of 1.2 V. The Duracell listing states that the cells work in any NiMH charger, and the other packs in this guide list NiMH chemistry as well, so a charger made for NiMH AA cells is the right match.

A Flip UltraHD camera can charge its included batteries through a powered USB port, but other batteries must be charged outside the camcorder. That means you should charge spare NiMH cells in an external charger, not inside the camera, and you should follow the charger guidance for charge time and cell placement.

Choose a charger with separate slots and a clear indicator, so you can charge one pair while the other pair sits in the camera. A charger that lists AA and AAA support gives you room to charge other cells too, and a charger with a shut off or indicator helps you avoid leaving cells on charge longer than needed.

How many spare AA batteries should I carry for video?

Carry at least one spare pair for a short shoot, which means four AA cells in total for a Flip camera that takes two cells. That setup gives you one pair in the camera and one pair ready to swap, and it fits the 4-pack packs in this guide with no extra purchase.

For a long filming day, carry two spare pairs, which means six AA cells in total. An 8-pack suits that pattern well, because you can keep two pairs charged in a case and still have a pair in rotation at home. A 24-pack suits a household or a creator who films often and wants many spares ready.

Label your pairs and rotate them in order, so each pair gets similar use. That habit keeps the pairs balanced, helps you spot a pair that no longer holds a charge, and means you always know which pair is fresh and which pair needs a charge after a shoot.

Why does the camera stop recording early?

A Flip camera may stop recording early when the cells run low, when the cells have sat unused for a long time, or when the cells are old and no longer hold a full charge. NiMH cells lose charge slowly in storage, so a pair charged months ago may hold far less power than a pair charged last night.

Temperature can also play a part, because cold weather can reduce the useful power from a cell during a shoot. The standard eneloop pack lists an operating range down to minus 20 degrees C, and the EBL pack notes improved low temperature performance, but a cold camera still benefits from a fresh pair kept in a warm pocket.

Try a fresh pair of charged cells first, and check that the cells sit firmly in the compartment with the correct polarity. If a fresh pair still stops early, try another pair from your rotation, and consider retiring a pair that no longer holds a charge through a normal shoot. Keep a spare pair charged and ready, so a weak pair never ends a filming session.

Conclusion

For most Flip UltraHD owners, the Panasonic eneloop pro 8-pack is the strongest pick, with 2550 mAh per cell, pre-charged cells, and 85 percent charge retention after 1 year. If you value reuse over capacity, pick the standard eneloop 4-pack with up to 2100 cycles, and if you want the most capacity, pick the EBL 8-pack at 2800 mAh.

Related guides

Browse all Buying Guides guides →