A rooftop array earns its keep after sunset only when daytime surplus has somewhere to go. This guide covers the best batteries for home solar systems: six fixed wall- or floor-mounted units built to pair with rooftop solar and a hybrid inverter. Each pick lists usable capacity, output, inverter fit, and warranty terms from maker pages.
Quick verdict
If you want one answer, start with usable capacity and inverter fit, because those two figures decide how much evening power you get. The six units below range from 6.9 kWh to 14.4 kWh of usable energy, and each one ties to a specific inverter family, so the right pick depends on the solar hardware already on your roof.
| Product | Usable capacity | Output | Type | Main limit |
|---|---|---|---|---|
| LG ESS Home 8 | 14.4 kWh | 7.5 kVA discharge | All-in-one, AC output | Dealer availability varies |
| SolarEdge Home Battery 10kWh | 9.7 kWh | 5 kW continuous | DC battery | SolarEdge inverters only |
| BYD Battery-Box Premium HVS 10.2 | 10.24 kWh | 25 A max output | DC battery | Needs a compatible hybrid inverter |
| Huawei LUNA2000-7-S1 | 6.9 kWh | 3.5 kW | DC battery | Huawei SUN2000 inverters only |
| SonnenCore+ SCORE-P10 | 10 kWh | 4.8 kVA | AC-coupled all-in-one | Indoor only |
| BYD Battery-Box Premium HVM 13.8 | 13.80 kWh | 50 A max output | DC battery | Needs a compatible hybrid inverter |
The LG ESS Home 8 leads the table on usable capacity and output, and it is the pick for a home that wants the most evening energy from one box. The SolarEdge unit is the natural pick for a SolarEdge roof, the BYD towers suit modular growth, the Huawei unit suits quiet outdoor spots, and the sonnenCore+ suits indoor AC-coupled retrofits. Read the inverter notes before shortlisting any unit.
How we selected
The list holds fixed home batteries that pair with rooftop solar through a hybrid inverter, and each unit has published maker specs. Portable power stations, rack batteries, and deep-cycle lead-acid units were left out, because they serve different jobs. Capacity, output, inverter fit, and warranty terms carried the most weight.
The shortlist came from maker product pages and maker datasheets, and every spec in this guide appears on a page that was opened during research. A product made the list only when the maker still lists it as a current product with a full spec sheet. Portable power stations were left out, even though some hold large capacities, because they are carry-away units with handles and AC outlets, not fixed storage wired into a home solar system.
Rack batteries and deep-cycle lead-acid units were also left out, because they serve off-grid racks and RV or marine use rather than whole-home solar storage. The six units that remain are all fixed, wall- or floor-mounted home batteries designed to pair with rooftop solar and a hybrid inverter. Usable capacity set the order of the table, while output, inverter fit, and warranty terms shaped the notes on each unit.
One candidate did not make the list: the Panasonic EverVolt 2.0. The maker page that was opened gives no current specs or buying path for the unit, so it could not be verified as currently for sale and it is listed in the sources file as not verified. No spec from it appears in this guide.
The six batteries for home solar systems
Each unit below is a fixed home battery, not a portable station, and each one is built to store rooftop solar for evening use and backup. The notes give the exact name, the usable capacity, the output, the inverter it pairs with, and the main limit, so you can match a unit to the solar hardware already in place.
LG ESS Home 8
The LG ESS Home 8 is the largest single unit in this guide, with 14.4 kWh of usable energy and 7.5 kVA of rated discharge power. It arrives as an all-in-one package with a Smart Energy Box and app monitoring, and it mounts on a floor stand with wall support or on a wall. Four units together store up to 57.6 kWh.
The LG ESS Home 8 stores 14.4 kWh of usable energy from a total capacity of 15.8 kWh, the largest single-unit figure in this guide. Rated discharge power is 7.5 kVA, rated charge power is 5.4 kVA, and peak discharge power reaches 9.0 kVA for 10 seconds. Round-trip efficiency is listed above 90 percent, and the unit runs on 120/240 V split phase at 60 Hz. Those figures make it the strongest single box here for homes with heavy evening loads.
The unit arrives as an all-in-one package: the LG Home 8 battery, a Smart Energy Box, ThinQ smart monitoring, and EnerVu for installers. The battery uses cylindrical lithium-ion cells at a nominal DC voltage of 406.56 V. Monitoring runs through the LG ThinQ app, and the Smart Energy Box handles the home energy routing. The package design keeps the inverter, battery, and controls in one maker family.
Mounting is flexible: the unit stands on a floor stand with wall support or mounts on a wall. Dimensions are 27.5 by 49.6 by 8.1 inches, and weight is 359 lb, so the install crew needs a clear path and a solid fixing point. The enclosure carries a NEMA Type 3R rating, and noise stays below 47 dB. Operating temperature runs from minus 20 to 50 degrees C on discharge and minus 10 to 45 degrees C on charge.
The maker lists a 10-year warranty with the battery holding 70 percent of capacity at 10 years, and the full 10-year term applies to qualified products registered with the ThinQ service and connected to the internet. That registration step matters, so confirm it with the installer at handover. This unit suits a home that wants the most evening energy from one box and already plans around LG hardware. Its main limit is weight and dealer-based availability, since the maker notes that availability may vary by dealer. Buy it if the priority is maximum usable capacity in a single all-in-one unit. Skip it if the install space cannot carry a 359 lb unit or a lighter wall-mounted unit fits the home better.
SolarEdge Home Battery 10kWh
The SolarEdge Home Battery 10kWh is a DC-coupled unit built for SolarEdge inverters, with 9.7 kWh of usable energy and 5 kW of continuous output. It mounts on a floor or a wall, indoors or outdoors, and up to three units can join one inverter. Backup use needs a Home Hub inverter and a Backup Interface.
The SolarEdge Home Battery 10kWh holds 9.7 kWh of usable energy at 100 percent depth of discharge, from the BAT-10K1P model. Continuous output power is 5,000 W, peak output in backup is 7,500 W for 10 seconds, and peak round-trip efficiency is 94.5 percent. Output voltage runs 350 to 450 Vdc at a nominal 400 Vdc, and maximum continuous output current is 14.3 A. The warranty runs 10 years.
The battery is DC-coupled and built for SolarEdge inverters: the Home Genesis inverter, the Home Hub inverter, and the Residential Three Phase Solar Inverter for Australia. Up to three batteries can join a single inverter. Backup use needs a SolarEdge Home Hub inverter and a SolarEdge Home Backup Interface. The whole setup is monitored and managed through a single app, covering solar, storage, EV charging, and smart devices.
Install is flexible: floor or wall mount, indoors or outdoors, with an IP55 and NEMA 3R enclosure. Dimensions are 790 by 1179 by 250 mm, weight is 119 kg, and cooling is natural convection. Noise at 1 m is under 25 dBA, and ambient operating temperature for charging runs from minus 10 to plus 50 degrees C. The floor stand and wall-mount handles are bought separately.
This unit suits a home that already runs SolarEdge inverters, since the battery, inverter, and app come from one maker. Its main limit is that closed pairing: it does not join inverters from other brands, and backup needs the extra interface hardware. Buy it if the roof already has a SolarEdge Home Hub or Genesis inverter. Skip it if the home runs a different inverter brand or needs backup without adding the Backup Interface.
BYD Battery-Box Premium HVS 10.2
The BYD Battery-Box Premium HVS 10.2 is a modular tower of four 2.56 kWh modules, giving 10.24 kWh of usable energy at 409.6 V nominal. It uses cobalt-free lithium iron phosphate cells, carries an IP55 rating, and pairs with a compatible high-voltage hybrid inverter. Up to three towers reach 38.4 kWh.
The BYD Battery-Box Premium HVS 10.2 holds 10.24 kWh of usable energy, built from four HVS modules of 2.56 kWh each at 102.4 V. Nominal voltage for the tower is 409.6 V, operating voltage runs 320 to 480 V, maximum output current is 25 A, and peak output current is 50 A for 3 seconds. Round-trip efficiency is listed at 96 percent or higher, and the warranty runs 10 years.
The tower uses cobalt-free lithium iron phosphate cells, the same chemistry BYD lists across the Premium range. The enclosure carries an IP55 rating, operating temperature runs from minus 10 to plus 50 degrees C, and the tower mounts on a floor stand for indoor or outdoor use. Communication runs over CAN or RS485 to the inverter. The maker lists the tower for on-grid, on-grid plus backup, and off-grid use.
Dimensions are 1228 by 585 by 298 mm, and weight is 167 kg. The tower grows by adding modules, from 5.12 kWh with two modules to 12.8 kWh with five, and up to three identical towers in parallel reach 38.4 kWh. The battery pairs with leading single-phase and three-phase high-voltage hybrid inverters from the maker compatibility list, so the inverter choice decides the pairing.
This tower suits a buyer who wants a modular DC battery that can grow module by module. Its main limit is that it is a battery only: it needs a compatible hybrid inverter, and it brings no built-in inverter of its own. Buy it if the plan is a high-voltage hybrid system with room to add modules later. Skip it if the home needs an all-in-one unit with the inverter built in.
Huawei LUNA2000-7-S1
The Huawei LUNA2000-7-S1 is the smallest unit here at 6.9 kWh of usable energy, and it is also the quietest, at under 29 dB. Each module has its own energy optimizer, the tower expands to 20.7 kWh, and the unit works only with Huawei SUN2000 inverters. Its IP66 rating suits outdoor placement.
The Huawei LUNA2000-7-S1 holds 6.9 kWh of usable energy at 100 percent depth of discharge, from a single 6.9 kWh battery module plus a power module. Maximum charging and discharging power is 3.5 kW, and the module uses lithium iron phosphate cells. The tower expands to 13.8 kWh with two modules and 20.7 kWh with three, and up to four towers in parallel reach 82.8 kWh per inverter. The warranty runs up to 15 years.
Each battery module carries its own built-in energy optimizer, which manages charging and discharging at module level. The maker states that the module-level optimizer improves energy throughput by more than 40 percent in its own laboratory tests. Communication runs over RS485, FE, and CAN, and the FusionSolar app shows energy flow, storage, and consumption. The unit works only with Huawei SUN2000 inverters.
The unit measures 590 by 255 by 510 mm and weighs 80 kg with the floor stand toolkit included. The enclosure carries an IP66 rating, which the maker describes as protection at 40 cm under water for 72 hours, and operating temperature runs from minus 20 to plus 55 degrees C. Noise stays below 29 dB at 1 m, and the cabinet resists up to 5T of pressure. A wall-mounting bracket is sold separately for buyers who prefer wall mounting.
This unit suits a quiet outdoor install on a Huawei SUN2000 system, especially where the battery sits near living space. Its main limit is the closed inverter pairing and the modest 3.5 kW output of a single module. Buy it if the home already runs a SUN2000 inverter and values quiet operation. Skip it if the home runs a different inverter brand or needs more than 3.5 kW from one small tower.
SonnenCore+ SCORE-P10
The sonnenCore+ SCORE-P10 is an AC-coupled all-in-one cabinet with 10 kWh of usable energy and a 4.8 kVA nominal power rating. It stacks to 60 kWh, runs below 25 dB with natural convection cooling, and carries a 10-year or 10,000-cycle system warranty. It is an indoor unit, rated IP30.
The sonnenCore+ SCORE-P10 holds 10 kWh of usable energy from two 5 kWh modules, each with 100 percent depth of discharge. Nominal power rating is 4.8 kVA grid-tied, inverter efficiency peaks at 94.4 percent, and maximum round-trip efficiency is 85.4 percent. The unit is AC-coupled, so it joins the solar system on the AC side and pairs with new and existing PV systems. Maximum recommended PV per system is 6 kVA.
The cabinet is a stackable indoor solution: one unit holds 10 kWh, two hold 20 kWh, and three hold 30 kWh, while the 20 kWh model reaches 60 kWh in a three-unit stack. The cells are lithium iron phosphate, cooling is natural convection, and noise stays below 25 dB. Ambient temperature runs from 0 to 45 degrees C, and the enclosure carries an IP30 rating for indoor use. The maker lists time-of-use, solar self-consumption, and emergency backup as the applications.
Dimensions are 27 by 69.5 by 14 inches, with legs that lift the height to 71.5 inches, and weight is about 353 lb. The warranty is a 10-year or 10,000-cycle system warranty that covers the inverter, battery modules, cabinet, and components. In off-grid mode the battery has a maximum charge limit of 4.48 kW for one system. Communication runs over Ethernet, and the maker notes an API is available to select partners.
This unit suits an indoor retrofit where the solar inverter stays in place and the battery joins on the AC side. Its main limit is the indoor-only rating and the 4.8 kVA output, the lowest in this guide, which suits steady evening loads rather than large simultaneous draws. Buy it if the install spot is a dry indoor room and the inverter is already in place. Skip it if the battery must live outdoors or the home needs higher output from a single unit.
BYD Battery-Box Premium HVM 13.8
The BYD Battery-Box Premium HVM 13.8 is the larger BYD tower in this guide, with 13.80 kWh of usable energy from five 2.76 kWh modules. It delivers up to 50 A of output current, reaches 22.08 kWh in its largest tower, and pairs with a compatible high-voltage hybrid inverter. Three towers in parallel reach 66.2 kWh.
The BYD Battery-Box Premium HVM 13.8 holds 13.80 kWh of usable energy, built from five HVM modules of 2.76 kWh each at 51.2 V. Nominal voltage for the tower is 256 V, operating voltage runs 240 to 354 V, maximum output current is 50 A, and peak output current is 75 A for 3 seconds. Round-trip efficiency is listed at 96 percent or higher, and the warranty runs 10 years.
The tower uses cobalt-free lithium iron phosphate cells, carries an IP55 rating, and runs from minus 10 to plus 50 degrees C. Communication runs over CAN or RS485, and the maker lists the tower for on-grid, on-grid plus backup, and off-grid use. Dimensions are 1461 by 585 by 298 mm, and weight is 205 kg, so the tower is tall and heavy and needs a firm floor spot.
The HVM range runs from 8.28 kWh with three modules to 22.08 kWh with eight, and up to three identical towers in parallel reach 66.2 kWh. The tower pairs with leading single-phase and three-phase high-voltage hybrid inverters from the maker compatibility list. Compared with the HVS 10.2 in this guide, the HVM 13.8 trades a taller tower for more usable energy and double the output current.
This tower suits a larger home that wants more storage and more current from one BYD tower. Its main limit is the same as the HVS: it is a battery only and needs a compatible hybrid inverter. Buy it if the home needs more than 12.8 kWh from a single tower and the inverter list includes a matching hybrid. Skip it if the install space cannot take a tower 1461 mm tall or the budget fits a smaller tower.
Buying guide
A home battery is a long-lived part of a solar system, so the buying choice turns on fit with your inverter, your evening load, and the space where the unit will live. The five points below walk through sizing, compatibility, capacity terms, placement, and warranty terms in that order.
Size batteries for home solar systems by evening use
Start with the energy your home uses after the sun goes down, not with the size of the solar array. A battery that holds less than one evening of use will cycle hard and still leave loads on the grid, while a much larger bank adds cost without adding evening coverage. List the evening loads first, then match usable capacity to that list.
Evening use is the honest yardstick because solar panels stop producing at dusk while cooking, lighting, and laundry keep running. Add up the kilowatt-hours the home draws between sunset and bedtime, then compare that total with the usable capacity column in the table above. A home with light evening use can live with a 6.9 kWh unit, while a home with heavy evening use needs 13 kWh or more. Keep a margin for cloudy days, when the battery starts the evening less than full.
Check inverter compatibility before you buy
Every battery in this guide pairs with a specific inverter family, and a mismatch means the unit cannot join the system at all. Confirm the exact inverter model on your roof, then check it against the battery maker compatibility list before ordering. An installer can confirm the pairing in one visit.
Compatibility matters most with the DC batteries in this guide, since they wire into a hybrid inverter on the DC side. The SolarEdge unit joins SolarEdge inverters only, the Huawei unit joins SUN2000 inverters only, and the BYD towers join high-voltage hybrids from the maker list. The AC-coupled units are more forgiving: the LG all-in-one and the sonnenCore+ join on the AC side and work beside an existing solar inverter. Get the pairing in writing before money changes hands.
Compare usable capacity, not nameplate capacity
Makers quote both total capacity and usable capacity, and only the usable figure tells you how much energy the battery can deliver. In this guide the gap runs from a small reserve to a full kilowatt-hour or more, so compare the usable column in the table above. Depth of discharge terms shape the same figure.
Total capacity is the size of the cells, while usable capacity is what the system lets you draw, and the gap is the reserve the maker holds back to protect cell life. The LG unit lists 15.8 kWh total and 14.4 kWh usable, a gap of 1.4 kWh. The SolarEdge and Huawei units list 100 percent depth of discharge, so their usable figure is the whole story. Always compare usable figures across brands, and ask the installer to confirm the figure for the exact configuration quoted.
Plan the install location and mounting
Fixed home batteries are heavy, with single units in this guide weighing from 80 kg to 163 kg, so the floor or wall must carry the load. Outdoor-rated units suit a garage wall or a sheltered exterior spot, while indoor-only cabinets need a dry room with clear airflow. Measure the space and the door path before delivery day.
Mounting options differ by unit: the LG unit stands on a floor stand with wall support or mounts on a wall, the SolarEdge unit mounts on a floor or a wall, and the BYD towers stand on the floor. Outdoor ratings also differ: the Huawei unit carries IP66, the SolarEdge and BYD units carry IP55, and the sonnenCore+ is indoor only at IP30. Check the operating temperature range for the chosen spot, since a cold garage or a hot attic can narrow the usable range.
Read the warranty terms in full
Warranties in this guide run 10 years on most units, with Huawei listing up to 15 years, and the fine print sets the capacity kept at the end of term. Some terms need product registration or an internet link to hold the longer period. Read the capacity retention figure and any throughput cap before you sign.
The headline year count is only half the warranty. LG lists 70 percent of capacity at 10 years, and the full 10-year term applies to qualified products registered with the ThinQ service and connected to the internet. Sonnen lists a 10-year or 10,000-cycle system warranty that covers the inverter, battery modules, cabinet, and components. Huawei lists up to 15 years on 80 percent of performance, subject to the warranty conditions. Ask for the warranty letter for the exact model, and keep the registration proof with the install paperwork.
FAQ
The questions below cover the points buyers ask most about fixed home solar batteries: service life, whole-home coverage, outage behavior, sizing, and later expansion. Each answer draws on the maker specs in this guide and on general solar practice, not on a single install story.
How long do batteries for home solar systems last
Maker warranties in this guide run 10 years on most units, with Huawei listing up to 15 years, and the end-of-term capacity figure is the number to watch. Lithium iron phosphate units in this guide carry 10-year terms, and cycle counts appear in some warranties. A battery that still holds most of its capacity at year 10 has served its term well.
Calendar life and cycle life both matter. A battery cycles once per day in a typical solar home, so a 10-year term covers roughly 3,650 cycles, and the sonnenCore+ warranty names 10,000 cycles as its limit. LG holds 70 percent of capacity at 10 years, and Huawei holds 80 percent of performance for up to 15 years under its conditions. Heat, deep cycling, and long storage at full charge all shorten service life, so the install spot and the charge settings matter as much as the chemistry.
Can a home battery run the whole house
A single battery can run part of a home through the evening, but whole-home coverage depends on the unit output and the loads running at once. The units here range from 3.5 kW to 7.5 kVA of output, so heavy loads such as air conditioning may need more than one unit. An installer load study gives the firm answer.
Output is the binding limit, not capacity. A 14.4 kWh battery with 7.5 kVA of output can run many loads at once, while a 6.9 kWh unit at 3.5 kW will trip or shed loads if too many large appliances start together. Stacking helps: LG allows up to four units, SolarEdge allows up to three per inverter, and BYD allows up to three towers. List the largest loads first, then size output to cover them.
Do home solar batteries work during a grid outage
Most fixed home batteries in this guide support backup power, but the backup path differs by unit and some need extra hardware. SolarEdge backup needs a Home Hub inverter and a Backup Interface, while other units route backup through the hybrid inverter. Confirm the exact backup hardware with your installer before an outage.
Backup also depends on the loads the installer wires to the backup panel. Critical loads such as lights, refrigeration, and communications usually sit on the backed-up circuits, while large loads such as electric heating may stay on the grid side. The battery can only back up what the installer connects, and the solar array can recharge the battery during a daytime outage only if the system is set up for it. Walk the backup circuit list with the installer at handover.
How many batteries does a home need
One unit covers the evening use of many homes, and the units in this guide range from 6.9 kWh to 14.4 kWh per unit. Homes with larger evening loads can stack units: LG allows up to four units, SolarEdge up to three per inverter, and BYD up to three towers. Size from evening use, not from the array size.
Start with one unit matched to evening use, then add capacity only when the evening load grows. An electric vehicle, a heat pump, or a home office can each add several kilowatt-hours to the evening total. The modular towers in this guide grow by adding modules, and the all-in-one units grow by adding a second box. Adding later is easier when the first install leaves wall space, floor space, and inverter headroom for the next unit.
Can I add more battery capacity later
Most units in this guide allow later expansion, either by adding modules to a tower or by adding a second unit. BYD towers grow by adding modules, Huawei towers grow to three modules and four towers in parallel, and sonnenCore+ stacks to three units. Confirm the expansion path with the installer before the first unit goes in.
Expansion limits differ by maker. BYD towers grow from 5.12 kWh to 12.8 kWh in the HVS range and from 8.28 kWh to 22.08 kWh in the HVM range, with up to three towers in parallel. Huawei towers grow to 20.7 kWh, and up to four towers in parallel reach 82.8 kWh per inverter on the MB0 series. LG grows to four units at 57.6 kWh of usable energy. Plan the floor space and the inverter capacity for the final size, not just the first unit.
Conclusion
For most homes with rooftop solar, the LG ESS Home 8 leads on capacity and output, while the SolarEdge Home Battery 10kWh suits homes on SolarEdge inverters. BYD towers fit buyers who want modular growth, Huawei suits outdoor installs, and sonnenCore+ fits AC-coupled retrofits. Match the battery to your inverter first, then size by evening use.
Write Your Review
No reviews yet. Be the first to share your experience!