RetroPie runs from a microSD card in a Raspberry Pi, so the card decides how fast the system boots and how fast games load. The best 32gb micro sd cards for retropie pair a read speed of at least 95MB/s with a Class 10 rating, and this guide compares five 32GB cards on speed, class, and build to help you pick one.
Quick verdict
Start with the SanDisk Extreme if you want the strongest 32GB card here, with read speeds up to 100MB/s, write speeds up to 60MB/s, and U3 and V30 ratings. It is the only card here with a V30 rating at 32GB, so it suits a RetroPie build that writes save files and scrapes game art often.
The SanDisk Ultra leads on read speed at up to 120MB/s, while the Samsung EVO Plus, the PNY Elite, and the Lexar 633x all read at up to 95MB/s or 100MB/s. All five cards are 32GB microSDHC cards, which meets the recommended minimum of at least 32GB for Raspberry Pi OS desktop and Full.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| SanDisk Extreme microSDHC UHS-I | microSDHC UHS-I | Best all-round RetroPie card | Read up to 100MB/s, write up to 60MB/s | A2 IOPS figures apply to larger sizes |
| SanDisk Ultra microSDHC UHS-I | microSDHC UHS-I | Fastest reads at 32GB | Read up to 120MB/s, write lower than read | Maker does not state a write speed |
| Samsung EVO Plus microSD | microSDHC UHS-I | Dependable spare card | Read up to 95MB/s, write up to 20MB/s | Slowest write speed here |
| PNY Elite microSDHC | microSDHC UHS-I | Budget pick with adapter | Read up to 100MB/s, write lower than read | Maker does not state a write speed |
| Lexar 633x microSDHC UHS-I | microSDHC UHS-I | Tested in many devices | Read up to 100MB/s | V10 only, no U3 or V30 rating |
How we selected
The shortlist rests on maker listed specs and the Raspberry Pi documentation, not on headline claims alone. Every card below comes from a maker page that names its speed, class, capacity, and the devices it fits, so each pick can be checked against the same published facts before you buy.
The first filter was the Raspberry Pi minimum. The documentation recommends at least 32GB for Raspberry Pi OS desktop and Full, and at least 8GB for Lite, so all five cards here are 32GB cards that meet the recommended minimum. The documentation also notes that the most common boot media type is a microSD card.
The second filter was speed. The documentation notes that faster storage with higher read and write speeds improves performance, so the shortlist favors cards with read speeds of 95MB/s or higher and Class 10 ratings. The SanDisk Extreme leads here with a 60MB/s write speed and U3 and V30 ratings at 32GB.
Best 32GB micro SD cards for RetroPie up close
The five cards below are all 32GB microSDHC cards with UHS-I interfaces and Class 10 ratings, so the choice comes down to read speed, write speed, and warranty. The SanDisk Extreme leads on write speed and class, the SanDisk Ultra leads on read speed, and the other three cards suit budget builds.
SanDisk Extreme microSDHC UHS-I
The SanDisk Extreme is the first pick for a RetroPie build, since it is the only 32GB card here with U3 and V30 ratings. It pairs a 100MB/s read speed with a 60MB/s write speed, so the system boots fast and save files write fast, and it suits a build that scrapes game art and saves often.
The maker lists this card as ideal for Android smartphones, action cameras, and drones, and it handles 4K UHD video recording, Full HD video, and high-resolution photos. It carries UHS Speed Class 3 and Video Speed Class 30 ratings for uninterrupted 4K UHD and Full HD video, and its A2 rating gives faster app performance on supported devices.
The maker lists read speeds up to 100MB/s and write speeds up to 60MB/s for the 32GB size, with read speeds up to 190MB/s and write speeds up to 130MB/s for the 256GB to 1TB sizes. Capacities run 32GB to 1TB. The card is shockproof, temperature-proof, waterproof, and X-ray-proof, and it works from minus 25 degrees C to 85 degrees C. A RescuePRO Deluxe data recovery software download offer is included, with QuickFlow technology for the 64GB to 1TB sizes.
The main limit is the A2 detail. The maker lists the A2 rating of 4000 read IOPS and 2000 write IOPS for the 64GB to 1TB sizes, so the 32GB card does not carry those IOPS figures. The card is UHS-I only, so it cannot match Express speeds in newer devices.
- Pro: Read speeds up to 100MB/s with a 60MB/s write speed
- Pro: U3 and V30 ratings, only card here with both at 32GB
- Pro: Shockproof, waterproof, and X-ray-proof build
- Pro: RescuePRO Deluxe data recovery software offer
- Con: A2 IOPS figures apply to 64GB and larger sizes
- Con: UHS-I only, no Express support
Buy if you want the strongest 32GB card here for a RetroPie build that saves and scrapes often. Skip if you only need a spare card, where the cheaper cards here read almost as fast.
SanDisk Ultra microSDHC UHS-I
The SanDisk Ultra is the fastest reader in this guide, with read speeds up to 120MB/s at 32GB. It suits a RetroPie build where boot time and game load time matter most, since faster reads shorten the wait when the system starts and when a game loads.
The maker lists this card for Android smartphones and tablets, Chromebooks, and Windows laptops, with Full HD video support and an A1 rating for faster app performance. The A1 rating means 1500 read IOPS and 500 write IOPS, which suits apps that read small files often, though RetroPie is not an Android system.
The maker lists read speeds up to 120MB/s for the 32GB size, with write speeds lower than the read speed, and the maker does not state a write speed figure for this card. The card is UHS-I, ships with an SD adapter, and works from minus 25 degrees C to 85 degrees C, with storage from minus 40 degrees C to 85 degrees C. It carries a 10-year limited warranty.
The main limit is the missing write speed figure. Without a stated write speed, owners who write save files and scrape game art often cannot compare this card against the 60MB/s write speed of the SanDisk Extreme. The card is UHS-I only, so it cannot match Express speeds in newer devices.
- Pro: Read speeds up to 120MB/s, fastest here at 32GB
- Pro: A1 rating for faster app performance
- Pro: SD adapter included in the box
- Pro: 10-year limited warranty
- Con: Maker does not state a write speed figure
- Con: No U3 or V30 rating at 32GB
Buy if you want the fastest reads here for quick boots and game loads. Skip if you write save files often and want a stated write speed to compare.
Samsung EVO Plus microSD
The Samsung EVO Plus is the dependable spare pick in this guide, with a read speed of up to 95MB/s and a write speed of up to 20MB/s at 32GB. It suits a second RetroPie build or a backup card, since it carries a 10-year limited warranty and a tough four-proof build.
The maker lists this card for hi-resolution images and 4K video files, with U1, Class 10, and A1 ratings at the 32GB size. The card uses the FAT32 format at 32GB, ships with an SD adapter, and measures 15mm x 11mm x 1mm, with a weight of about 0.25g.
The maker lists read speeds up to 95MB/s and write speeds up to 20MB/s for the 32GB size on a UHS-I interface, and the maker notes that the marketing line of up to 100MB/s read and 90MB/s write refers to the 512GB card. The card is water resistant for up to 72 hours in seawater, works from minus 25 degrees C to 85 degrees C, and resists X-rays up to 50 Roentgen and magnets up to 15,000 gauss. It carries a 10-year limited warranty.
The main limit is write speed. The 20MB/s write is the slowest in this guide, well below the 60MB/s write of the SanDisk Extreme, so owners who write save files and scrape game art often should pick a faster writer. The warranty also does not extend to dashcam, CCTV, surveillance camera, and other write-intensive uses.
- Pro: Read speeds up to 95MB/s for everyday use
- Pro: Four-proof build for water, heat, X-rays, and magnets
- Pro: SD adapter included in the box
- Pro: 10-year limited warranty
- Con: Write speed up to 20MB/s is slowest here
- Con: U1 only, no U3 or V30 rating at 32GB
Buy if you want a dependable spare card with a long warranty for a second build. Skip if you write save files often, where the SanDisk Extreme writes faster.
PNY Elite microSDHC
The PNY Elite is the budget pick in this guide, with a read speed of up to 100MB/s at 32GB. It suits a first RetroPie build on a tight budget, since it ships with an SD adapter and carries drop, magnetic, temperature, and water proofing at a lower headline speed.
The maker lists this card as a microSDHC card with a Class 10 and U1 rating on a UHS-I interface, with capacities from 16GB to 128GB. The card ships with an SD adapter, so it fits full-size SD slots in laptops and desktop readers without a separate adapter.
The maker lists read speeds up to 100MB/s, with write speeds lower than the read speed, and the maker does not state a write speed figure for this card. The card is drop proof, magnetic proof, temperature proof, and water proof, and it carries a limited warranty.
The main limit is the missing write speed figure. Without a stated write speed, owners cannot compare this card against the 60MB/s write speed of the SanDisk Extreme or the 20MB/s write speed of the Samsung EVO Plus. The card is UHS-I only, so it cannot match Express speeds in newer devices.
- Pro: Read speeds up to 100MB/s for everyday use
- Pro: SD adapter included in the box
- Pro: Drop, magnetic, temperature, and water proof
- Pro: Capacities from 16GB to 128GB
- Con: Maker does not state a write speed figure
- Con: No U3 or V30 rating at 32GB
Buy if you want a budget 32GB card with an adapter for a first RetroPie build. Skip if you want a stated write speed, where the SanDisk Extreme and Samsung EVO Plus name their figures.
Lexar 633x microSDHC UHS-I
The Lexar 633x is the tested pick in this guide, with a read speed of up to 100MB/s at 32GB. It suits a RetroPie build where broad device support matters, since the maker states that the 633x range was tested in more than 1,100 digital devices. That testing history gives the card a broad fit across cameras, phones, and tablets.
The maker lists this card as a microSDHC card with a Class 10 and UHS-I rating and a V10 video rating at 32GB, with an SD adapter included. The card suits cameras, phones, and tablets, and the 32GB size is a microSDHC card, which is the format the Raspberry Pi boot slot takes.
The maker lists read speeds up to 100MB/s for the 32GB size, and the maker does not state a write speed figure for this card. The card ships with an SD adapter. The 32GB spec block lists a V10 rating, while the U3 and V30 mentions on the page belong to the 64GB and larger sizes in the 633x range.
The main limit is the speed class. The 32GB size carries a V10 rating only, with no U3 or V30 rating, so it sits below the SanDisk Extreme on class at the same size. The card is UHS-I only, so it cannot match Express speeds in newer devices.
- Pro: Read speeds up to 100MB/s for everyday use
- Pro: Tested in more than 1,100 digital devices
- Pro: SD adapter included in the box
- Pro: V10 rating for video recording
- Con: V10 only, no U3 or V30 rating at 32GB
- Con: Maker does not state a write speed figure
Buy if you want a broadly tested 32GB card with an adapter for a RetroPie build. Skip if you want a higher speed class, where the SanDisk Extreme carries U3 and V30 at 32GB.
Buying guide
Picking a RetroPie card starts with the Raspberry Pi minimum, not the card. The five points below walk through the size, the speed class, capacity, card care, and larger sizes, so you can match a card to the way you build. Each point names the maker listed figure behind it, so you can check the advice against the cards above.
How to pick 32GB micro SD cards for RetroPie
Start with the Raspberry Pi minimum. The documentation recommends at least 32GB for Raspberry Pi OS desktop and Full, and at least 8GB for Lite, so a 32GB card meets the recommended minimum for a full desktop build with RetroPie on top. A 32GB card is the practical floor for a full build, not a tight fit.
Next, match the speed to the build. The documentation notes that the most common boot media type is a microSD card, and that faster storage with higher read and write speeds improves performance. Pick a card with a read speed of 95MB/s or higher and a Class 10 rating, since all five cards here meet that bar.
Speed classes and RetroPie load times
Speed classes describe the minimum write speed, not the headline read speed. The UHS Speed Classes U1 and U3 and the Video Speed Classes V10 and V30 are defined by the SD Association based on minimum sequential write speed, and V30 means a minimum sequential write speed of 30MB/s, while U1 and V10 mean 10MB/s.
The SanDisk Extreme leads here with U3 and V30 ratings and a 60MB/s write speed at 32GB, while the Samsung EVO Plus and the PNY Elite carry U1 ratings with a 20MB/s write speed or an unstated write speed, and the Lexar 633x carries a V10 rating. Read speed matters most for boots and loads, and the SanDisk Ultra leads there at up to 120MB/s.
32GB capacity and Raspberry Pi OS
Capacity decides how much room the system and the games have. The documentation recommends at least 32GB for Raspberry Pi OS desktop and Full, and at least 8GB for Lite, so a 32GB card gives the system room to run with space left for a full game library.
Plan around the library. A 32GB card holds the system and a modest set of games, while a large library of disc-based games fills it fast, so owners with big libraries should move up to a larger card. The five cards here all come in larger sizes too, so the same series can grow with the build.
Card care and backups for a RetroPie build
Card care matters as much as speed, since a RetroPie build holds the system, the games, and the save files on one card. Keep a spare card with a copy of the system image, so a failed card does not lose the whole build, and keep the spare card dry in a case.
Buy from a trusted seller. Fake cards on unauthorized marketplaces can spoof capacity or read and write speeds, so check the capacity printed on the card and test the card before you load the system on it. A card that reads slower than its stated speed is a warning sign.
When to move up to a larger card
Move up when the library outgrows 32GB. The documentation notes that the maximum supported capacity is less than 2TB, so cards up to 1TB work in a Raspberry Pi, and all five series here come in sizes up to 128GB or larger. A larger card also gives the system more room to write save files and scrape game art.
Watch the older models. The documentation notes that some older devices can only boot from a boot partition of 256GB or less, so owners of a Pi Zero, a first classic Pi, or an early Pi 2 should stay at 256GB or below. All models since the Model B+ have a microSD slot and boot automatically from an inserted microSD card with a valid OS image.
FAQ
These five questions cover the points RetroPie builders ask most about 32GB cards: the minimum size, app ratings, card models, larger sizes, and the 32GB fit. Each answer rests on a maker listed figure or a documentation figure from the cards above, so you can check it against the product sections.
Can RetroPie run on a 32GB micro SD card
Yes, since the documentation recommends at least 32GB for Raspberry Pi OS desktop and Full, and RetroPie runs on top of Raspberry Pi OS. A 32GB card meets the recommended minimum, with room left for a game library after the system. That makes 32GB the right size for a first build, with room to grow later.
All five cards here are 32GB cards, and the SanDisk Extreme leads on write speed and class at that size. Owners with a large library of disc-based games should move up to a larger card, since 32GB fills fast with big games.
What is the minimum card size for Raspberry Pi OS
The minimum is at least 32GB for Raspberry Pi OS desktop and Full, and at least 8GB for Lite, according to the documentation. The documentation notes that the most common boot media type is a microSD card, and that faster storage with higher read and write speeds improves performance.
A 32GB card is the recommended minimum for a full desktop build, so it suits a RetroPie build with room to spare. An 8GB card suits only the Lite build, which leaves little room for games.
Do I need an A1 or A2 card for RetroPie
No, not as a requirement, since A1 and A2 ratings describe app performance on Android devices. The A1 rating means 1500 read IOPS and 500 write IOPS, while the A2 rating means 4000 read IOPS and 2000 write IOPS for the 64GB to 1TB sizes on the SanDisk Extreme page.
RetroPie is not an Android system, so the A1 or A2 rating is not a requirement for it. What matters is the read and write speed, since the documentation notes that faster storage with higher read and write speeds improves performance, so pick on speed and class instead of the app rating.
Which Raspberry Pi models take a microSD card
All models since the Model B+ have a microSD slot and boot automatically from an inserted microSD card with a valid OS image, according to the documentation. The documentation notes that the most common boot media type is a microSD card. That slot is the only storage the board needs to start, so the card is the heart of the build.
Older models differ. The documentation notes that some older devices can only boot from a boot partition of 256GB or less, including the Pi Zero, the first classic Pi, and early Pi 2 models, so owners of those models should stay at 256GB or below.
What is the largest card a Raspberry Pi takes
The largest card is less than 2TB, which the documentation lists as the maximum supported capacity. Cards up to 1TB work in a Raspberry Pi, and all five series here come in sizes up to 128GB or larger. That ceiling is far above what a RetroPie build needs, so capacity is rarely the limit.
Watch the boot partition limit on older models. The documentation notes that some older devices can only boot from a boot partition of 256GB or less, so a 256GB card is the largest supported pick for a Pi Zero, a first classic Pi, or an early Pi 2.
Conclusion
Pick the SanDisk Extreme for the strongest 32GB card here, with a 60MB/s write speed and U3 and V30 ratings, or the SanDisk Ultra for the fastest reads at up to 120MB/s. All five cards meet the 32GB recommended minimum for Raspberry Pi OS desktop and Full, so match the card to your library, then check the size and class on the pack before you buy.
Write Your Review
No reviews yet. Be the first to share your experience!