The best batteries for video cameras keep a camcorder or mirrorless body recording through long takes, hold a charge on the shelf between shoots, and match the camera charging circuit exactly. This guide compares six packs, each verified on a live product page, so you can match capacity, voltage, and fit to your camera.

Quick verdict

If you want the short answer, start with the BM Premium BP-828 for Canon camcorders or the Sony NP-FW50 for Sony mirrorless bodies, since both cover the most popular cameras here. The Canon LP-E17, Sony NP-BX1, Panasonic VW-VBT190, and JVC BN-VF823 fill the remaining slots, from compact vlogging cameras to older Handycam and Everio camcorders.

Battery Capacity Voltage Best for
BM Premium BP-828 3000mAh 7.4V Canon XA and VIXIA
Sony NP-FW50 1020mAh min 7.2V mean Sony a6000 and ZV-E10
Sony NP-BX1 1240mAh 3.6V Sony RX100 and ZV-1
Canon LP-E17 1040mAh 7.2V Canon EOS R and Rebel
VW-VBT190 replacement 1940mAh 3.6V Panasonic HC-V series
BN-VF823 replacement 2400mAh 7.2V JVC GY-HM100 and Everio

How we selected the best batteries for video cameras

This guide covers only battery packs that fit a video camera or a mirrorless body used for video, each listed as in stock on its product page. The six packs below span Canon, Sony, Panasonic, and JVC cameras, from pro XA camcorders to pocket vlogging bodies, so most video shooters find a match here.

Capacity came first. A video camera drains a pack far faster than a stills camera, so the milliamp-hour figure sets how long a take runs before the battery warning appears. The packs here range from 1020 mAh for the Sony NP-FW50 to 3000 mAh for the BM Premium BP-828, and the guide lists each figure as stated.

Voltage came second. A pack must match the camera voltage, since a 3.6 volt pack cannot run a 7.2 volt body, and a 7.2 volt pack does not belong in a 3.6 volt camera. The packs here run at 3.6 volts or 7.2 volts, and the guide lists the voltage next to the capacity for every pack.

Fit came third. Battery codes differ between camera families, and a BP-828 does not fit a camera that takes an LP-E17, even though both are Canon packs. The guide lists the camera models each pack fits, so you can check the code on your camera or in the manual before you order.

Six batteries for video cameras

Six packs made the cut, ranging from 1020 mAh to 3000 mAh per pack, and each one below lists the figures that matter for video work: capacity, voltage, size, weight, and the cameras it fits. Read each entry for the full spec list before you pick a pack.

BM Premium BP-828

The BM Premium BP-828 is the highest-capacity pack in this guide, storing 3000 mAh for Canon XA and VIXIA camcorders, and it ships from Amazon with a one-year warranty. It fits the same cameras as the Canon original, from the XA10 to the XA75 and the XF400 and XF405, so one pack covers a wide range of Canon video bodies.

The BM Premium BP-828 stores 3000 mAh in a lithium-ion pack, and the listing states the cells are engineered to meet or exceed OEM specifications, with advanced circuitry, voltage regulation, and thermal circuit protection. The package measures 3.5 by 1.81 by 1.34 inches and weighs 2 ounces, and the listing states the pack is not discontinued by the manufacturer.

The Canon original BP-828 is rated at 2670 mAh, so the BM Premium figure runs about 12 percent higher than the Canon figure. Dolgin states that a Canon BP-828 charges to full capacity in about 2.5 hours on its TC400 four-position charger. The Amazon listing shows an Add to Cart button, with the pack shipping from Amazon and sold by Big Mike’s Electronics.

The pack fits Canon XA10, XA11, XA15, XA20, XA25, XA30, XA35, XA40, XA45, XA50, XA55, XA60, XA65, XA70, and XA75, plus VIXIA HF G21, HF G30, HF G40, HF G50, HF G60, and HF G70, plus the GX10 and the XF400 and XF405. That range covers Canon pro camcorders and prosumer VIXIA bodies in one pack, which suits owners who run more than one Canon camera.

The strengths of this pack are easy to list.

  • 3000 mAh, the highest capacity in this guide
  • Fits XA, VIXIA, GX10, XF400, and XF405 camcorders
  • Voltage regulation and thermal circuit protection
  • One-year warranty from BM Premium
  • Add to Cart shown, shipping from Amazon

A few limits deserve a note before you buy.

  • 3000 mAh is the BM Premium figure, not the Canon original figure of 2670 mAh
  • No voltage figure stated on the Amazon listing
  • Third-party pack, not a Canon original

Buy it if you run a Canon XA or VIXIA camcorder and want the longest run time per charge in this guide.

Skip it if you want a Canon original pack and the 2670 mAh figure it carries.

Sony NP-FW50

The Sony NP-FW50 is the standard pack for Sony a6000 series bodies, the ZV-E10, and the RX10 series, and it shows the remaining battery capacity on the camera display. The Glazer’s listing shows the pack in stock, and the Sony store lists it as available to order, so it stays easy to find.

The NP-FW50 is a hybrid lithium-ion pack with a mean output of 7.2 volts and a minimum capacity of 7.3 watt hours, or 1020 mAh. The Sony store lists the pack at 7.4 volts and notes ActiFORCE faster charging, so the two listings state slightly different voltage figures. The Glazer’s page lists the pack as in stock, with the battery supplied in the box.

The pack fits the ZV-E10, the a6000, a6100, a6300, a6400, and a6500, the a7, a7 II, a7R, and a7S series, the RX10, RX10 II, RX10 III, and RX10 IV, the NEX-3, NEX-5, NEX-6, and NEX-7 series, the SLT-A33, SLT-A35, SLT-A37, and SLT-A55V, and the QX1. That range covers Sony mirrorless bodies and bridge cameras across more than a decade of models.

The NP-FW50 is the smallest pack in this guide by capacity, at 1020 mAh minimum, so video shooters should carry a spare. The pack displays the remaining capacity on the camera, which helps you plan a swap before the battery warning appears. Two packs cover a full shooting day for most a6000 series owners.

The strengths of this pack are easy to list.

  • Fits ZV-E10, a6000 series, a7 series, and RX10 series
  • Shows remaining capacity on the camera display
  • ActiFORCE faster charging per the Sony store
  • In stock at Glazer’s and available to order at Sony
  • Hybrid lithium-ion chemistry

A few limits deserve a note before you buy.

  • 1020 mAh minimum is the lowest capacity in this guide
  • Voltage figures differ between listings, 7.2 volts mean and 7.4 volts at Sony
  • Video shooters need a spare pack for a full day

Buy it if you shoot video on a Sony a6000 series body, a ZV-E10, or an RX10 camera.

Skip it if you want a larger pack and your camera takes a different battery code.

Sony NP-BX1

The Sony NP-BX1 is the pack for the RX100 series, the ZV-1, and Sony Action Cams, and the genuine Sony pack stores 1240 mAh at 3.6 volts. The Fitineers listing shows the pack in stock, and the Sony maker page lists the same capacity, so the figure is consistent across both sources.

The NP-BX1 is a lithium-ion Type X pack with an approximate capacity of 3.6 volts and 4.5 watt hours, or 1240 mAh. It measures about 29.9 by 9.2 by 42.7 millimeters and weighs about 25 grams, which keeps it light in a pocket camera. The Fitineers page lists the pack as in stock in Kuwait, with 24-hour delivery across the country.

The pack fits the Cyber-shot DSC-RX100 through RX100 VII, the RX1 and RX1R, the DSC-HX300, HX50V, WX300, and HX400V, and the Action Cams FDR-X1000V, HDR-AS200V, HDR-AS100V, HDR-AS30V, HDR-AS20, HDR-AS15, and HDR-AS10. That range covers pocket cameras, bridge cameras, and action cams in one pack.

Third-party NP-BX1 replacements list capacities from 1090 mAh to 1600 mAh, so the genuine Sony figure of 1240 mAh sits in the middle of that range. The Sony maker page and the Fitineers listing both state 1240 mAh, which makes the genuine figure the one to trust when you compare packs. The pack is small and light, so a spare fits in a pocket or a bag pouch.

The strengths of this pack are easy to list.

  • Genuine Sony pack, 1240 mAh at 3.6 volts
  • Fits RX100 series, ZV-1, and Sony Action Cams
  • Only 25 grams and 29.9 by 9.2 by 42.7 millimeters
  • In stock at Fitineers with 24-hour delivery
  • Capacity figure matches across maker and retailer

A few limits deserve a note before you buy.

  • 1240 mAh runs a pocket camera for a shorter stretch than a camcorder pack
  • Fitineers stock is in Kuwait, so check shipping to your country
  • Third-party packs list higher capacities that the maker does not match

Buy it if you shoot video on an RX100, a ZV-1, or a Sony Action Cam and want the genuine pack.

Skip it if your camera takes the larger NP-FW50 or NP-FZ100 pack instead.

Canon LP-E17

The Canon LP-E17 is the pack for Canon EOS R and Rebel bodies used for video, storing 1040 mAh at 7.2 volts, and the Canon USA store lists it as in stock. The pack ships with select cameras and is offered as a spare or replacement, so it suits owners who want a second pack for a long shoot day.

The LP-E17 is a rechargeable lithium-ion pack with a rated voltage of 7.2 volts and a capacity of 1040 mAh, per the Canon Asia maker page. The Canon USA listing shows the pack in stock under SKU 9967B002, and the maker lists the LC-E17, LC-E17E, and LC-E17C chargers as compatible. The pack is supplied with select cameras and offered here as a spare or replacement.

The pack fits the EOS M3, M5, and M6, the EOS RP, R8, R10, R50, and R100, the Rebel SL2, SL3, T6i, T6s, T7i, and T8i, the EOS 77D, and the Connect Station CS100. That range covers Canon mirrorless bodies, DSLRs, and a storage device in one pack, which suits owners who run more than one Canon body.

The LP-E17 is a modest pack at 1040 mAh, so video shooters should plan on a swap during a long recording day. The pack communicates with the camera, so the body shows the remaining charge on the display. Two packs and the LC-E17 charger cover a full day of video work for most EOS R and Rebel owners.

The strengths of this pack are easy to list.

  • Genuine Canon pack, 1040 mAh at 7.2 volts
  • Fits EOS R, EOS M, Rebel, and 77D bodies
  • In stock at Canon USA under SKU 9967B002
  • Works with LC-E17, LC-E17E, and LC-E17C chargers
  • Shows remaining charge on the camera display

A few limits deserve a note before you buy.

  • 1040 mAh is modest for long video takes
  • Video shooters need a spare pack for a full day
  • No cycle count stated on the maker page

Buy it if you shoot video on a Canon EOS R, EOS M, or Rebel body and want the genuine pack.

Skip it if your camera takes the larger LP-E6NH pack instead.

Panasonic VW-VBT190 replacement

The VW-VBT190 replacement pack fits Panasonic HC-V and HC-W camcorders, storing 1940 mAh at 3.6 volts, and it covers the same models as the Panasonic original. The listing names the VW-VBT380 as a compatible model too, so the same camcorders also take the larger 3880 mAh pack when you want more run time.

The replacement pack stores 1940 mAh at 3.6 volts, or 7.0 watt hours, and the listing ships one replacement battery per pack. The page lists a long run of compatible camcorders, from the HC-V110 to the HC-V800 and the HC-WX970 and HC-WXF991, so it covers Panasonic consumer camcorders across many model years.

The pack fits the HC-V110, HC-V130, HC-V160, HC-V180, HC-V201, HC-V210, HC-V230, HC-V250, HC-V270, HC-V360, HC-V380, HC-V480, HC-V510, HC-V520, HC-V550, HC-V620, HC-V710, HC-V720, HC-V750, HC-V770, and HC-V800, plus the HC-VX1, HC-VX870, HC-VX980, and HC-VX981, plus the HC-W570, HC-W580, HC-W850, and HC-W870, plus the HC-WX970, HC-WX990, HC-WXF990, HC-WXF991, and HC-WXF1. That range makes it the widest-fitting pack in this guide.

The Panasonic HC-V270 manual lists a charging time of 2 hours 20 minutes for the VW-VBT190, with about 2 hours of maximum continuous recording in 1080/60p and about 1 hour of actual recordable time. The larger VW-VBT380 charges in 3 hours 45 minutes and records about 4 hours 10 minutes of maximum continuous time in the same format, so the step up doubles the run time for a longer charging time.

One note: the page fetch did not show a stock field for this listing, so check availability before you order. The pack is a replacement, not a Panasonic original, so the capacity figure of 1940 mAh matches the Panasonic manual figure for the VW-VBT190, which gives buyers a consistent reference point across both sources.

The strengths of this pack are easy to list.

  • 1940 mAh at 3.6 volts, matching the Panasonic figure
  • Fits HC-V, HC-W, HC-VX, and HC-WX camcorders
  • Same camcorders also take the larger VW-VBT380
  • One pack covers many Panasonic model years

A few limits deserve a note before you buy.

  • Stock field did not show on the page fetch
  • Replacement pack, not a Panasonic original
  • No charge time stated on the listing

Buy it if you run a Panasonic HC-V or HC-W camcorder and want a fresh pack for the original battery code.

Skip it if you want a Panasonic original pack and the stock status confirmed on the listing.

JVC BN-VF823 replacement

The BN-VF823 replacement pack fits JVC GY-HM100 pro camcorders and Everio models, storing 2400 mAh, and the BatteryFly listing shows it in stock. The pack is fully decoded, so the camera reads the battery data, and it replaces four JVC part numbers in one pack.

The replacement pack stores 2400 mAh and is listed as fully decoded, which means the camera shows the remaining charge. The BatteryFly listing shows the pack in stock, and the page names BN-VF823, BN-VF823U, BN-VF923, and BN-VF923U as the compatible part numbers. The pack fits the GY-HM100 and GY-HM100U pro camcorders, plus the GR-D and GZ-HD and GZ-MG Everio lines.

The genuine JVC BN-VF823U is rated at 1460 mAh, so the replacement figure of 2400 mAh runs about 64 percent higher than the JVC figure. That gap is common with third-party packs, which list higher capacities than the original, so treat the 2400 mAh figure as the replacement maker figure, not a JVC figure. The pack fits a long list of JVC camcorders, from the GR-D720 to the GZ-MG880 and the GZ-X900.

The pack suits owners of older JVC camcorders who want a fresh battery for a camera that still records well. The GY-HM100 is a pro handheld camcorder, and a fresh pack keeps it running on location. Check the part number on your old pack before you order, since the BN-VF823 family shares its shape with the BN-VF908 and BN-VF815 families.

The strengths of this pack are easy to list.

  • 2400 mAh, the second-highest capacity in this guide
  • Fully decoded, so the camera reads the battery data
  • Replaces BN-VF823, BN-VF823U, BN-VF923, and BN-VF923U
  • In stock at BatteryFly
  • Fits GY-HM100 and a long Everio list

A few limits deserve a note before you buy.

  • 2400 mAh is the replacement figure, not the JVC figure of 1460 mAh
  • No voltage figure stated on the listing
  • Third-party pack, not a JVC original

Buy it if you run a JVC GY-HM100 or an Everio camcorder and want a fresh pack with a decoded chip.

Skip it if you want a JVC original pack and the 1460 mAh figure it carries.

Buying guide

Capacity, voltage, and fit decide most video camera battery choices. The five sections below turn the specs above into practical checks you can run before you order. Work through them in order to match a pack to your recording time, your charger, and your storage habits, so the pick fits how you actually shoot.

Match capacity to your recording time

A 1040 mAh pack runs a camera for a shorter stretch than a 3000 mAh pack, and the gap matters on long recording days. Match the pack to your shoot length. The spread between the lowest and highest packs runs to nearly three to one, so a long recording day favors the higher-capacity packs, while short sessions run fine on any pack here.

The packs here range from 1020 mAh for the Sony NP-FW50 to 3000 mAh for the BM Premium BP-828, a spread of nearly three to one. A camcorder pack like the BP-828 runs longer per charge than a pocket camera pack like the NP-BX1, so compare packs within the same camera family, not across families.

Run time also depends on the screen, the recording format, and how often the camera starts and stops, so no listing gives a camera-specific hour figure. The BP-828 charges in about 2.5 hours on the Dolgin TC400, while the VW-VBT190 charges in 2 hours 20 minutes per the Panasonic manual. Treat capacity as a ranking tool, not a clock.

Check voltage and battery code before you order

A pack must match the camera voltage and the battery code on the camera or in the manual. The packs here run at 3.6 volts or 7.2 volts, and the wrong voltage does not belong in your camera, even if the pack looks the same shape. Check the code printed on your old pack first, since two packs can share a shape and still fit different cameras.

Check the code printed on your old pack first. A BP-828 fits Canon XA and VIXIA bodies, an LP-E17 fits Canon EOS R and Rebel bodies, and the two do not swap, even though both are Canon packs. The same rule holds for Sony: an NP-FW50 does not fit a camera that takes an NP-BX1.

Voltage figures can differ between listings, as the NP-FW50 shows with a 7.2 volt mean output at Glazer’s and a 7.4 volt figure at the Sony store. Both figures describe the same pack, so use the battery code as the match key, and treat the voltage as a check, not a choice.

Carry a spare set and a charger

One pack rarely covers a full shooting day, and a second pack keeps the camera running while the first pack charges. A dual charger fills two packs at once, which suits a long event. The BP-828 charges in about 2.5 hours on the Dolgin TC400, so a second pack and a charger in the bag keep the camera running through a long event without a break.

The BP-828 charges in about 2.5 hours on the Dolgin TC400 four-position charger, which charges up to four packs at once without changing the charge time. The LP-E17 charges on the LC-E17, LC-E17E, or LC-E17C charger, and the BM Premium NP-FV100A kit includes a charger, though that kit showed no featured offer at the time of writing.

Rotate the packs so both get used. A pack that sits unused for months loses charge slowly, and a spare that has sat for a year may not hold a full charge. Label the packs with the purchase date and charge both before a shoot.

Storage between shoots

Lithium-ion packs hold their charge well in storage, but they lose charge slowly over months. Store them charged in a cool, dry place and check the charge before a shoot, since a pack that sat for a year may need a top-up. Keep packs away from heat and metal objects, and store them in the case they came in when you can.

The NP-FW50 and NP-BX1 are small packs that fit in a pocket or a bag pouch, so they travel well, while the BP-828 and BN-VF823 are larger packs that suit a camera bag. Keep packs away from heat and metal objects, and store them in the case they came in when you can.

Check the packs before a planned shoot, and top them up if they have sat for months. A pack that shows full on the camera display after a long rest may still drop fast under load, so run a short test recording before a shoot that matters.

Genuine packs versus third-party packs

Genuine packs carry the maker capacity figure, while third-party packs often list a higher figure. The BP-828 shows the gap clearly: Canon rates the original at 2670 mAh, while the BM Premium pack lists 3000 mAh, and the BN-VF823 shows the same pattern with a JVC figure of 1460 mAh against a replacement figure of 2400 mAh.

Third-party packs suit owners who want more capacity per charge and a lower spend, and the packs here carry circuit protection and decoded chips. Genuine packs suit owners who want the maker figure and the maker warranty, and the NP-FW50, NP-BX1, and LP-E17 in this guide are genuine packs.

Check the listing for the warranty and the return policy before you order. The BM Premium packs carry a one-year warranty, while the genuine packs carry the maker warranty. A decoded chip matters for camcorders that show the remaining time, so check that the pack is fully decoded when the camera reads battery data.

Frequently asked questions

Five questions come up in nearly every video camera battery search. Each answer uses the figures listed on the product pages in this guide. From run time per charge to bigger packs, chargers, USB charging, and storage, each answer below uses the figures listed on the product pages, so you can check every claim against its source before you buy.

How long do video camera batteries last on one charge

A pack lasts as long as its capacity, the camera draw, and the recording format allow, and the packs here range from 1020 mAh to 3000 mAh. The 3000 mAh BP-828 lasts longest per charge, while the 1020 mAh NP-FW50 lasts shortest, so carry a spare for the smaller packs.

No listing in this guide gives a camera-specific hour figure, so the article does not state one. The screen, the recording format, and how often the camera starts and stops all change the draw, so two shooters get different run times from the same pack. The BP-828 charges in about 2.5 hours on the Dolgin TC400, and the VW-VBT190 charges in 2 hours 20 minutes per the Panasonic manual.

Plan around the capacity ranking instead of a clock. A camcorder pack runs longer than a pocket camera pack, and a spare pack doubles the run time. Charge both packs before a shoot and swap when the camera shows the battery warning.

Can you use a bigger battery than the one that came with the camera

Yes, when the bigger pack carries the same battery code and voltage. The VW-VBT380 is the bigger brother of the VW-VBT190 at 3880 mAh, and the same Panasonic camcorders take both packs, so owners can step up to the larger pack for more run time. That step up doubles the run time for a longer charging time.

The same rule holds for third-party packs that list a higher capacity than the original, like the BM Premium BP-828 at 3000 mAh against the Canon original at 2670 mAh. The pack must still match the battery code and the voltage, and the camera must read the pack data, so check that the pack is fully decoded before you buy.

A bigger pack adds size and weight, so check that it still fits the camera grip and the bag. The VW-VBT380 is taller than the VW-VBT190, and a camcorder case that fits the smaller pack may not close over the larger one. Measure the compartment before you order a bigger pack.

Do video camera batteries need a special charger

Most packs charge on a charger built for their battery code. The LP-E17 charges on the LC-E17, LC-E17E, or LC-E17C charger, and the BP-828 charges on the Dolgin TC400 four-position charger. Canon packs bearing the Intelligent System mark show the remaining usage time accurate to 1 minute.

A charger built for one code does not charge another code, so match the charger to the pack. The BM Premium NP-FV100A kit includes a charger built for FV series packs, which shows how makers bundle the charger with the pack. A dual charger fills two packs at once, which suits a two-pack shoot day.

Some cameras charge the pack inside the body through a USB cable, while others need an external charger. Check the camera manual for the charging method, and keep a charger in the bag for shoots away from a power outlet, since a dead pack ends the shoot.

Can you charge a camera battery through USB

Some cameras charge the pack inside the body through a USB cable, while others need an external charger. The method depends on the camera, not the pack, so check the camera manual before you plan a USB charging setup. A camera that supports in-body USB charging suits a shoot near a power bank, so plan the kit around the method your camera uses.

A camera that supports in-body USB charging suits a shoot near a power bank, while a camera that needs an external charger needs the charger in the bag. The pack itself does not decide the method, so check the camera manual for the charging method and plan the kit around it.

USB charging is slower than a dedicated charger in most cases, and it ties the camera to the cable while it charges. A separate charger frees the camera and fills a spare pack while you shoot, so carry a charger for long days even when the camera supports USB charging.

How do you store camera batteries between shoots

Store lithium-ion packs charged in a cool, dry place, away from heat and metal objects, and check the charge before a shoot. A pack that sat for months loses charge slowly, so top it up the day before a planned shoot. Keep packs in the case they came in when you can, and label each pack with the purchase date so you rotate them as a set.

The NP-FW50 and NP-BX1 are small packs that fit in a pocket or a bag pouch, so they travel well, while the BP-828 and BN-VF823 are larger packs that suit a camera bag. Keep packs in the case they came in when you can, and label each pack with the purchase date so you rotate them as a set.

Do not store packs fully drained or fully charged for months at a time. A mid-level charge suits long storage, and a short test recording before a shoot that matters shows whether the pack still holds a full charge under load.

Conclusion

The BM Premium BP-828 leads this guide for capacity, the Sony NP-FW50 leads for camera coverage, and the Canon LP-E17 leads for genuine Canon video bodies. Pick the pack that fits your camera code and your shoot length. Match the battery code, carry a spare, and the camera stays ready for long takes and daily shooting.

The BM Premium BP-828 is the pick for Canon camcorder owners who want the longest run time per charge, while the Sony NP-FW50 suits mirrorless video shooters with its wide camera range. The NP-BX1, LP-E17, VW-VBT190, and BN-VF823 cover the remaining cameras in this guide. Match the battery code, carry a spare, and the camera stays ready.

Related guides

Browse all Buying Guides guides →