The Blackmagic Pocket Cinema Camera 4K runs on LP-E6 type batteries, so one cell rarely covers a full shoot. The best batteries for bmpcc 4k pair the right capacity with chargers that refill spares fast, from single USB-C cells to three-battery kits. This guide compares six options and explains how to build a kit that keeps the camera rolling.

Quick verdict

Start with the Canon LP-E6P pack if you want the current first-party cell, then add third-party LP-E6NH spares for volume. The Strobepro cell carries the highest rated capacity in this set, while the NEEWER three-pack covers the longest days on location.

The BMPCC 4K is a power-hungry cinema camera, and its small internal battery bay sets the terms of every shoot. No single LP-E6 cell turns it into an all-day camera, so the practical answer is a small set of cells plus a charger that works away from a wall outlet. That is why this guide weighs capacity, charging method, and kit size together instead of ranking cells by milliamp-hours alone.

If you buy only one thing, make it a two- or three-battery kit with a USB charger, because a lone spare still leaves you charging one cell while shooting on the other. If you already own Canon LP-E6 chargers, a single high-capacity cell slots straight into your existing routine. The picks below cover both paths, and each one is tied to specs from a page that was opened and read.

Product Type Capacity Charging Best for
Canon Battery Pack LP-E6P LP-E6P 2130 mAh LC-E6 dock or in-camera USB First-party fit and high discharge current
SmallRig LP-E6NH Camera Battery 4071 LP-E6NH 2040 mAh, 14.69 Wh Original charger or SmallRig charger 4084 A light single spare
Strobepro LP-E6NH Battery LP-E6NH 2250 mAh, 16.2 Wh LC-E6 or LC-E6E charger Highest rated capacity in this set
SmallRig LP-E6NH Camera Battery and Charger Kit 3821 LP-E6NH kit 2 x 2040 mAh, 14.69 Wh Dual USB charger with LCD display Two batteries plus a dock
NEEWER 3 Pack 2200mAh LP-E6P/LP-E6NH Replacement Batteries For Canon LP-E6P kit 3 x 2200 mAh, 17.76 Wh Triple USB charger with LCD display Three batteries for long days
ProMaster Li-Ion Battery for Canon LP-E6NH with USB-C Charging LP-E6NH 2150 mAh Built-in USB-C port Cable-only charging on the move

How we selected

Every pick below comes from a product page that was opened and read, and every number in this guide comes from one of those pages. The shortlist favors LP-E6 and LP-E6P cells because the BMPCC 4K takes LP-E6 type batteries, and it favors cells with a stated capacity, a stated charging path, and a clear kit size.

Fit came first. The BMPCC 4K takes LP-E6 type batteries, and LP-E6P cells are listed as backward compatible with LP-E6, LP-E6N, and LP-E6NH cameras and devices, so both generations belong in this guide. A cell that did not state LP-E6 compatibility on its own page did not make the list, and a cell whose maker page showed it out of stock was left out of the picks.

Capacity came second, read in both milliamp-hours and watt-hours where the maker stated both. Watt-hours matter because they describe total energy, while milliamp-hours alone can mislead when rated voltages differ. The NEEWER cells, for example, are rated at 7.4 V while most LP-E6NH cells are rated at 7.2 V, so the Wh figure gives the fairer comparison.

Charging came third. A dock charger suits a home base, a USB-C cell suits a bag with a power bank, and a multi-bay charger suits a crew that rotates cells through the day. Canon lists its own LP-E6NH pack as out of stock in its own stores, so this guide leans on the current LP-E6P pack and third-party LP-E6NH cells. No runtime claim for the BMPCC 4K appears below, because none of the opened pages states one.

The best batteries for BMPCC 4K

Six options in this guide cover the realistic ways to power this camera, from one first-party cell to a three-battery kit with its own charger. Each entry states who it suits, what the maker lists, where it falls short, and when to buy it or pass on it.

Canon Battery Pack LP-E6P

The LP-E6P is Canon’s current first-party LP-E6 cell and the natural reference point for this guide. The maker lists it as the successor to the LP-E6NH, with the same 2130 mAh capacity and a higher maximum continuous discharge current of 6 A for newer cameras.

Canon lists the LP-E6P at 2130 mAh and describes it as the successor to the LP-E6NH, with the same capacity but a higher maximum continuous discharge current of 6 A. That higher current rating is aimed at newer cameras from the EOS R5 Mark II onward, and it gives the cell headroom for power-hungry video work. The pack works with LC-E6 and LC-E6E chargers and with the CBC-E6 car battery charger, so owners of earlier LP-E6 chargers do not need new hardware.

In-camera USB charging is supported through the USB Power Adapter PD-E2 and PD-E1, sold separately, on cameras that support direct charging. For BMPCC 4K owners, the value here is first-party fit and a current production cell from the maker that defines the LP-E6 family. The main limit is capacity: at 2130 mAh it sits below the highest-rated third-party cells in this guide, so it wins on pedigree rather than on raw milliamp-hours.

Pros:

  • First-party Canon cell with a stated 2130 mAh capacity
  • Higher 6 A maximum continuous discharge current than the LP-E6NH
  • Works with LC-E6, LC-E6E, and CBC-E6 chargers
  • In-camera USB charging through PD-E2 and PD-E1 adapters
  • Backward compatible with the LP-E6 family

Cons:

  • Capacity trails the highest-rated third-party cells here
  • No built-in USB-C port on the battery itself
  • In-camera charging needs a separate adapter

Buy if: you want the current first-party cell and already own LP-E6 chargers.

Skip if: you need the most milliamp-hours per cell or a battery that charges over USB-C on its own.

SmallRig LP-E6NH Camera Battery 4071

The SmallRig 4071 is a single LP-E6NH cell for shooters who want one light spare. The maker lists it at 2040 mAh, 7.2 V, and 14.69 Wh, with a full decoding chip, a weight of 78 g, and a shell of ABS and PC that matches the original battery size for a clean fit.

SmallRig lists the 4071 as a lithium-ion LP-E6NH cell rated at 2040 mAh, 7.2 V, and 14.69 Wh, with a charging limited voltage of 8.4 V and an operating temperature range of 0 to 40 degrees C. Its dimensions are 56.7 by 38.4 by 21.0 mm, and it weighs 78 g, so it matches the size of the original battery and fits the compartment without jamming. The shell is ABS and PC, and the listing describes it as a fireproof material with a frosted surface.

The full decoding chip is the feature that matters most day to day. The maker states that the chip supports the original camera and charger without causing pop-up windows and enables power display, which keeps the camera’s battery readout working as expected. The cell works with the SmallRig LP-E6NH camera battery charger 4084 and also supports charging with the original charger. The box holds one battery, one protective cover, and one user manual.

Pros:

  • Full decoding chip for power display without pop-up windows
  • Light at 78 g with the same size as the original battery
  • Works with the original charger and the SmallRig charger 4084
  • Stated 2040 mAh, 7.2 V, and 14.69 Wh ratings
  • Protective cover included in the box

Cons:

  • Lowest rated capacity among the single cells in this guide
  • No built-in USB-C charging port
  • No charger included with the single battery

Buy if: you need one light, well-fitting spare and already own a charger.

Skip if: you want the longest runtime per cell or a kit with a charger in the box.

Strobepro LP-E6NH Battery

The Strobepro LP-E6NH carries the highest rated capacity in this set at 2250 mAh. The maker lists it as a 7.2 V, 16.2 Wh lithium-ion replacement cell with the same form factor as the LP-E6 and LP-E6N, and a 6-month warranty stated on the listing page.

Strobepro lists this battery at 2250 mAh, 7.2 V, and 16.2 Wh, which puts it ahead of the Canon LP-E6P at 2130 mAh and ahead of the other LP-E6NH cells in this guide on rated capacity. The maker states that it has the same form factor as the LP-E6 and LP-E6N batteries and can be used as a higher-capacity substitute for those earlier packs. That matters for BMPCC 4K owners because the camera’s bay accepts the LP-E6 family, so a higher-capacity cell in the same shape is a direct swap.

Charging runs through Canon LC-E6 and LC-E6E chargers, and through the Strobepro charger for Canon LP-E6 and LP-E6N. The maker notes that battery functions can vary by camera model, and that in-camera or USB charging may only be available on supported bodies, so the BMPCC 4K owner should plan on dock charging. The listing notes a 6-month warranty, and the box holds one battery. The main limit is the lack of a built-in USB-C port, so this cell suits a shooter who already owns a dock charger and wants the most energy per swap.

Pros:

  • Highest rated capacity in this set at 2250 mAh and 16.2 Wh
  • Same form factor as the LP-E6 and LP-E6N
  • Works with Canon LC-E6 and LC-E6E chargers
  • Stated 7.2 V rating matches the LP-E6 family

Cons:

  • No built-in USB-C charging port
  • No charger included in the box
  • Charging features can vary by camera model

Buy if: you want the most rated capacity per cell and already own an LP-E6 dock charger.

Skip if: you need USB-C charging on the battery or a kit that includes a charger.

SmallRig LP-E6NH Camera Battery and Charger Kit 3821

The SmallRig 3821 kit pairs two LP-E6NH batteries with a dual charger, which is the smallest complete rotation for a shoot day. Each battery is rated at 2040 mAh, 7.2 V, and 14.69 Wh, and the charger shows live charging data on an LCD screen for field use.

The kit holds two LP-E6NH camera batteries, two protective covers, one dual battery charger with a built-in USB-A cable, and one user manual. Each battery measures 56.7 by 38.4 by 21.0 mm and weighs 78 g, and the charger measures 90 by 56 by 27 mm and weighs 65 g. The charger can charge two batteries at the same time, and its LCD screen displays real-time charging voltage, current, and charged capacity. The charger takes USB-C input and a built-in USB-A cable, each with a 5 V, 2.1 A minimum input, and it outputs 8.4 V at 1000 mA for one battery or two.

The batteries use a full decoding chip, so the maker states they support varied cameras without causing pop-up windows, and the shell is fireproof ABS and PC with a frosted finish. The kit does not include a USB power adapter, and the maker notes that the two input interfaces should not be used at the same time. Two limits deserve attention: the maker states the kit is not fully compatible with the Canon EOS R5C, and not compatible with the EOS R5 Mark II. For a BMPCC 4K kit, the dual charger and the second battery are the real value, since one cell can charge while the other runs the camera.

Pros:

  • Two 2040 mAh batteries plus a dual charger in one kit
  • LCD screen shows voltage, current, and charged capacity
  • Charges two batteries at the same time
  • USB-C input and built-in USB-A cable for power banks and car chargers
  • Full decoding chip without pop-up windows

Cons:

  • No USB power adapter included in the kit
  • Not fully compatible with the Canon EOS R5C
  • Not compatible with the EOS R5 Mark II

Buy if: you want a two-battery rotation with a USB charger for field use.

Skip if: you shoot with an EOS R5C or R5 Mark II as well, or you need a charger with an adapter in the box.

NEEWER 3 Pack 2200mAh LP-E6P/LP-E6NH Replacement Batteries For Canon

The NEEWER three-pack is the volume pick in this guide, with three 2200 mAh cells and a triple-slot USB charger. The maker rates each battery at 7.4 V and 17.76 Wh, with a 6 A maximum continuous discharge current, and a 6.25-hour refill for all three cells at once.

NEEWER lists three LP-E6P replacement batteries, each rated at 2200 mAh, 7.4 V, and 17.76 Wh, with a maximum continuous discharge current of 6 A. Each battery measures 57 by 38 by 21 mm and weighs 81 g, and the maker states the cells are fully decoded to match the original LP-E6P specifications, with real-time battery level display on the camera. The triple-slot USB charger can charge three batteries to full capacity in 6.25 hours, and it uses Micro USB and Type-C dual input ports, with an LCD display that shows real-time charging status.

The charger takes 5 V at 3 A input and outputs 8.4 V at 850 mA for a single slot, 650 mA for dual slots, and 450 mA for triple slots. It weighs 324 g and comes with a 60 cm USB-A to USB-C cable. The batteries use a fireproof ABS and PC casing, and the maker lists protection against overheating, overcharging, over discharge, short circuits, overcurrent, and overvoltage. The maker also lists a 2-year warranty for products bought from the official website. The 7.4 V rating is higher than the 7.2 V rating of the other cells here, which is why the 17.76 Wh figure is the fair comparison point.

Pros:

  • Three 2200 mAh batteries cover long shoot days
  • Triple-slot charger refills three cells in 6.25 hours
  • 6 A maximum continuous discharge current
  • LCD display shows real-time charging status
  • Micro USB and Type-C dual input ports

Cons:

  • Triple charging is slower per slot at 450 mA
  • Charger weighs 324 g, the heaviest charger here
  • Rated at 7.4 V rather than the usual 7.2 V

Buy if: you run long days and want three cells plus a triple charger in one purchase.

Skip if: you travel light or you only need one spare cell.

ProMaster Li-Ion Battery for Canon LP-E6NH with USB-C Charging

The ProMaster LP-E6NH is the cable-only pick in this guide, with a USB-C port built into the battery itself. The maker lists it at 2150 mAh, and it charges from any USB source without a separate dock, and it ships with a cable and a reusable storage case.

ProMaster lists this lithium-ion battery at 2150 mAh, with an integrated USB-C port for charging. A USB-C to USB-A charging cord is included, and charging works from a USB power source with a minimum charging current of 0.5 A and a maximum of 3.0 A. An on-board LED changes from red to green when charging finishes, and the maker states that charging from fully depleted to full takes approximately 4 and a half hours with a 0.95 A minimum charging current.

The battery also works with in-camera charging and with external chargers, so the USB-C port is an extra path rather than the only one. The maker lists overcharge, over discharge, overcurrent, overvoltage, and short-circuit protection. The battery ships in a reusable storage case with two internal compartments, which holds the battery and the included cable, or a second battery in place of the cable. That case keeps the contacts covered during transport, which matters when spares ride loose in a bag.

Pros:

  • Built-in USB-C port charges without a separate dock
  • Works with USB chargers as low as 0.5 A
  • On-board LED shows red while charging and green when full
  • Also works with in-camera charging and external chargers
  • Reusable storage case with two compartments included

Cons:

  • Full charge takes approximately 4 and a half hours over USB
  • Rated capacity trails the Strobepro and NEEWER cells
  • Only one battery in the box

Buy if: you want to charge spares from a power bank or laptop with no dock to carry.

Skip if: you need the fastest refill or the most capacity per cell.

Buying guide

Picking batteries for the BMPCC 4K is a system choice, not a single-cell choice. Fit, capacity, charging, and the number of spares all interact, and the right answer depends on how long your shoot days run and where you can recharge during the shoot.

Start with LP-E6 fit before capacity

The BMPCC 4K takes LP-E6 type batteries, so fit is the first filter for every candidate. LP-E6, LP-E6N, LP-E6NH, and LP-E6P cells share the same battery bay shape, and the LP-E6P is listed as backward compatible with the earlier types. A cell that does not state LP-E6 compatibility has no place in this kit.

Fit also covers the decoding chip. Third-party cells with a full decoding chip keep the camera’s power display working and avoid pop-up windows, which is why both SmallRig options in this guide call out their chips. A cell without a stated decoding chip may still work, but the maker has not promised that behavior, so treat the claim with care.

How many of the best batteries for BMPCC 4K should you carry?

Plan on at least three cells for a half-day shoot and five or more for a full day. One cell runs the camera while a second charges, and a third covers the gap when the first two are both down. The NEEWER three-pack and the SmallRig two-battery kit match this pattern directly.

Count your shoot in blocks, not in hours, because recording settings and accessories change power draw. A short interview block needs one fresh cell, while a long event block needs a rotation. Carry the spares in their covers or cases, keep one cell in the camera, and swap before the low-battery warning appears rather than after it.

USB-C charging against dock charging

USB-C charging wins on the move, and dock charging wins at a home base. The ProMaster cell charges from a power bank or laptop through its built-in port, while the SmallRig and NEEWER kits use USB chargers that refill two or three cells at once. A dock charger with an LCD display shows voltage, current, and charged capacity.

Match the charger to your power sources. If you spend the day away from wall outlets, a USB charger plus a power bank is the practical pair. If you return to a base between blocks, a multi-bay dock refills the whole set at once. Keep one charging path as a backup, because a single failed charger can end a shoot day early.

Read the Wh rating, not only mAh

Milliamp-hours describe charge, while watt-hours describe energy, and energy is what runs the camera. Two cells with the same milliamp-hour rating can hold different amounts of energy when their rated voltages differ, so compare the Wh figure when the maker states it. The Strobepro cell lists 16.2 Wh and the NEEWER cell lists 17.76 Wh.

Use the Wh rating for travel planning too, since spare lithium batteries belong in carry-on bags and their watt-hour rating is the figure that airlines and crews ask about. Keep the rating visible on the cell or its case, and store spares with their contacts covered so they cannot touch metal objects in a bag.

Plan charging time into the shoot day

Charging time is part of the kit, not an afterthought, because a slow refill can leave you short on the next block. The NEEWER triple charger takes 6.25 hours for three cells, and the ProMaster cell takes approximately 4 and a half hours over USB, so neither refills in minutes. The SmallRig dual charger refills two cells at once.

Build the day around the charger. Start with all cells full, rotate the emptiest cell onto the charger first, and keep the charger running during lunch and travel gaps. If your schedule has no gaps, carry more cells instead of hoping for a fast refill, because the stated charging times above leave little room for improvisation.

FAQ

These questions cover the points that BMPCC 4K owners ask most often about LP-E6 batteries, from USB-C charging to mixing brands. Each answer sticks to what the makers state on the pages used for this guide, and on the specs those pages list for each cell.

Which of the best batteries for BMPCC 4K charge over USB-C?

The ProMaster LP-E6NH charges through a USB-C port built into the battery, with a USB-C to USB-A cable included. The SmallRig 3821 kit and the NEEWER three-pack use USB chargers with Type-C input, while the Canon LP-E6P and the single SmallRig and Strobepro cells rely on dock or in-camera charging.

USB-C on the battery is the most flexible option, since it needs no dock at all. USB-C on the charger is the next best thing, since it still needs the dock but accepts power from a bank or laptop. Choose the battery-port option if you travel with one spare, and the multi-bay USB charger if you rotate several cells.

Can LP-E6P batteries power the BMPCC 4K?

Yes, LP-E6P cells are listed as backward compatible with LP-E6, LP-E6N, and LP-E6NH types, and the BMPCC 4K takes LP-E6 type batteries. The Canon LP-E6P and the NEEWER LP-E6P replacement cells in this guide both carry that compatibility, so either fits the camera’s battery bay.

The LP-E6P brings a 6 A maximum continuous discharge current, which is its main advance over the LP-E6NH. That rating matters most for newer Canon cameras, but it does no harm in the BMPCC 4K, where the cell simply needs to fit and deliver power. Check the maker’s compatibility list before buying, since functions can vary by camera model.

Do third-party LP-E6 batteries show a charge level?

Cells with a full decoding chip do, according to their makers. SmallRig states that its LP-E6NH cells support the original camera and charger without pop-up windows and enable power display, and NEEWER states that its cells are fully decoded with real-time battery level display on the camera.

That display matters because a cell without a readout leaves you guessing when to swap. If the charge display is important to your workflow, pick a cell whose maker states decoding support, and keep one first-party cell in the kit as a reference. The Strobepro and ProMaster cells do not state decoding behavior on their pages, so do not assume it for those two.

Should you mix battery brands on one shoot?

Mixing brands is common, and this guide itself mixes six products from five makers. The practical rule is to label each cell, track which ones are full, and rotate them in order, since different brands carry different rated capacities and charging times. A 2250 mAh cell and a 2040 mAh cell will not run down at the same pace.

Keep the charger matched to the cell when the maker states a charger model, and do not assume that every charger suits every cell. The SmallRig 4071 works with the SmallRig charger 4084 and the original charger, while the NEEWER charger supports original and NEEWER LP-E6P, LP-E6NH, LP-E6N, and LP-E6 batteries. When in doubt, use the charger the maker lists for that cell.

How should you store spare LP-E6 batteries?

Store spares with their contacts covered, in their covers or cases, and away from metal objects in your bag. The SmallRig single battery ships with a protective cover, the SmallRig kit includes two covers, and the ProMaster battery ships in a case with two compartments that keeps the contacts covered during transport.

Keep full and empty cells apart so a swap never grabs a dead cell by mistake. A small pouch with two sides, or a simple label system, does the job. Charge spares before a shoot day, and recharge them after the day ends, so the kit starts every morning in the same ready state.

Conclusion

Buy the Canon LP-E6P for first-party fit, add the Strobepro cell for the most rated capacity, and round out the kit with the NEEWER three-pack or the SmallRig dual kit. That mix covers short blocks and long days alike, and it keeps the BMPCC 4K recording through every block of the shoot day, from the first setup to the last take.

Related guides

Browse all Buying Guides guides →