Choosing the best batteries for home battery bank storage comes down to two numbers: how much energy the bank holds, and how much power it can deliver at once. This guide compares six fixed systems with verified capacity, output, solar input, and expansion limits, so you can match a bank to your loads.

Quick verdict

If you want one large fixed unit with strong output, the FranklinWH aPower 2 leads on capacity per unit at 15 kWh and 10 kW continuous output. Tesla Powerwall 3 suits solar homes that want a built-in inverter, while Enphase IQ Battery 5P fits homes that plan to add small blocks over time.

For a modular system you can move or expand in steps, EcoFlow DELTA Pro Ultra starts at 6 kWh and 7.2 kW and grows to 90 kWh, and Anker SOLIX F3800 starts at 3,840 Wh and 6,000 W with up to six expansion packs. Generac PWRcell 2 suits homes that want module-by-module growth from 9 kWh to 36 kWh with generator pairing.

The right pick depends on your load list more than on any single headline number. A bank with high capacity but low output can run lights for hours yet fail to start a large air conditioner. A bank with high output but small capacity can start heavy loads yet run dry early in the night. List your overnight loads first, then check capacity, output, solar input, and expansion room in that order.

Product Type Usable capacity Continuous output Best for Main limit
Tesla Powerwall 3 Fixed wall or floor unit with built-in solar inverter 13.5 kWh 11.5 kW Solar homes that want one integrated box Charge power is 5 kW without expansion units
Enphase IQ Battery 5P Modular AC-coupled unit 5.0 kWh per unit 3.84 kVA Small starts that grow unit by unit One unit alone suits light loads only
FranklinWH aPower 2 Fixed AC-coupled unit 15 kWh per unit 10 kW Whole-home backup from a single unit Heavy unit at 357 lb needs a firm mount
EcoFlow DELTA Pro Ultra Modular inverter plus battery packs 6 kWh per battery 7.2 kW Flexible growth to very large banks Full backup needs the Smart Home Panel 2
Anker SOLIX F3800 Portable station with expansion packs 3,840 Wh 6,000 W Rolling placement and step-by-step growth Solar input tops out at 2,400 W
Generac PWRcell 2 Modular cabinet with 3 kWh modules 9 to 18 kWh per cabinet 5.2 to 10.5 kW Module-by-module growth with generator pairing NMC chemistry differs from the LFP units here

How we selected

We picked fixed and modular home storage systems with published datasheets or maker product pages that state usable capacity, continuous output, and expansion limits in plain numbers. Each system here had a page we could open and read, and every figure in this guide comes from one of those pages rather than from memory.

We favored systems that cover a clear home use case: one integrated solar-plus-battery box, one small modular block, one large single unit, one portable modular system, and one cabinet that grows module by module. We also favored a spread of capacities from 3,840 Wh to 15 kWh per unit, so the comparison shows how size, output, and expansion trade off against each other.

We did not rank these systems by any single number. Capacity, output, solar input, chemistry, weight, noise, and warranty length all matter, and the best balance shifts with the home. A small home with light overnight loads can do well with a modest bank, while a large home with air conditioning and an electric vehicle charger needs far more capacity and output.

Six home battery bank systems for a fixed home setup

These six systems cover the main ways to build a home battery bank: a fixed integrated unit, a small modular block, a large single unit, a portable modular stack, and a cabinet that grows one module at a time. Read each section for capacity, output, solar input, and the limits that matter most in daily use.

Tesla Powerwall 3

Tesla Powerwall 3 is a fully integrated solar and battery system with a built-in solar inverter, so a new solar-plus-battery home can use one box where older designs needed two. The maker lists 13.5 kWh of nominal battery energy, 11.5 kW of nominal AC output power, and up to 20 kW of solar input across 6 MPPTs.

The output rating is configurable, with settings at 5.8 kW, 7.6 kW, 10 kW, and 11.5 kW, which lets an installer match the unit to the home grid connection. Off-grid, the maker lists up to 15.4 kW of continuous discharge power with solar only, when the on-grid rating is 11.5 kW and the unit is installed with an 80 A breaker and conductors sized for that load. Load start capability is listed at 185 LRA, which covers motor loads such as pumps and compressors.

Efficiency is listed at 89 percent for solar to battery to home or grid, and 97.5 percent for solar to home or grid. Charge power is 5 kW for a single unit and rises to 8 kW with up to 3 expansion units, each adding 13.5 kWh. Up to 4 Powerwall 3 units are supported in one system. The unit measures 43.5 x 24 x 7.6 in, weighs 291.2 lb installed, mounts on a floor or a wall, and operates from minus 20 degrees C to 50 degrees C. Connectivity covers Wi-Fi, Ethernet, and cellular, and the Tesla Mobile App is the customer interface. Warranty is listed at 10 years.

Pros:

  • Built-in solar inverter with 20 kW of solar input and 6 MPPTs
  • Strong 11.5 kW output with 185 LRA load start capability
  • Expands with up to 3 expansion units and up to 4 main units
  • Outdoor rated with a wide operating temperature range

Cons:

  • Charge power is only 5 kW without expansion units
  • Full off-grid output needs a specific breaker and conductor setup
  • Heavy installed weight of 291.2 lb needs a firm mounting plan

Buy it if you are building a solar home and want one integrated box with strong output and room to grow. Skip it if you need fast charging from a single unit alone or you want a small modular block you can add to in small steps.

Enphase IQ Battery 5P

Enphase IQ Battery 5P is an all-in-one AC-coupled system with 5.0 kWh of usable capacity and six embedded grid-forming microinverters. The maker lists up to 3.84 kVA of continuous output power at 240 VAC, 3.33 kVA at 208 VAC, and up to 7.68 kVA of peak power, with a power start capability of up to 48 A LRA.

The small block size is the point of this design. One unit suits light loads and self-consumption, while several units together can cover larger homes, since the system scales by adding units rather than by buying one large box. The maker lists AC round-trip efficiency of 90 percent and DC round-trip efficiency of 96 percent, with a nominal DC voltage of 76.8 V. Chemistry is lithium iron phosphate, and the limited warranty covers more than 60 percent capacity for up to 15 years or 6,000 cycles, whichever comes first.

The unit measures 38.6 x 21.7 x 7.4 in and has a total installed weight of 174 lb. It mounts on a wall or on a pedestal sold separately, cools by natural convection with no moving parts or fans, and operates at less than 30 dBA at 1 m. Charging is listed from minus 20 degrees C to 50 degrees C and discharging from minus 20 degrees C to 55 degrees C, with an altitude limit of 2,500 m. Monitoring runs through the Enphase App, and the listed modes are backup, self-consumption, time-of-use, and NEM integrity. Backup operation uses the IQ System Controller 3 or 3G, so plan for that controller in a backup design.

Pros:

  • Small 5.0 kWh blocks let a home grow capacity in modest steps
  • Long warranty of up to 15 years or 6,000 cycles
  • Quiet passive cooling with no fans and noise under 30 dBA
  • Six embedded microinverters with grid-forming capability

Cons:

  • One unit alone gives only 3.84 kVA of continuous output
  • Backup needs a separate IQ System Controller
  • Several units are needed for heavy whole-home loads

Buy it if you want to start small, grow block by block, and value a long warranty with quiet operation. Skip it if you want one large unit to cover heavy loads from day one without adding more blocks.

FranklinWH aPower 2

FranklinWH aPower 2 is an AC-coupled battery with 15 kWh of usable system energy per unit, the largest single-unit capacity in this guide. The maker lists 10 kW of continuous output power, 11.5 kVA of maximum apparent power, 15 kW of peak output power for 10 seconds, and 25 kW of transient load capacity for 1 second.

The maker also lists 185 A of load start capability, which it links to starting a 5-ton air conditioner, and 8 kW of maximum continuous charge power. Round-trip efficiency is listed at 90 percent. Chemistry is lithium iron phosphate, and the warranty covers 15 years or 60 MWh of aggregate throughput. Up to 15 units can join one aGate controller for 225 kWh of storage, and the system works with all solar inverter brands, which suits retrofit projects on existing solar arrays.

The unit measures 45.2 x 29.5 x 11.8 in and weighs 357 lb complete, with wall or floor mounting. Cooling is natural, with no fan, and noise is listed at 30 dBA typical and 45 dBA maximum. The enclosure carries an IP67 rating for the battery pack and inverter, and the unit is rated for indoor and outdoor use from minus 4 degrees F to 122 degrees F, with operation up to 131 degrees F at 5 kW derated output. The aGate controller links solar, grid, generator, and EV sources, and the FranklinWH App shows real-time energy data and load control.

Pros:

  • Largest single-unit capacity here at 15 kWh with 10 kW output
  • Long 15-year or 60 MWh throughput warranty
  • Strong load start at 185 A LRA for large air conditioning
  • IP67 enclosure and fan-free cooling for outdoor placement

Cons:

  • Heavy 357 lb unit needs a firm wall or floor mount
  • Output falls to 5 kW at the top of its temperature range
  • Full system control needs the separate aGate controller

Buy it if you want one large unit to cover whole-home backup with strong output and a long warranty. Skip it if your wall or floor cannot carry a 357 lb unit, or if you prefer to start with a small block and grow in small steps.

EcoFlow DELTA Pro Ultra

EcoFlow DELTA Pro Ultra is a modular whole-home energy system that starts with one inverter and one 6 kWh battery and grows by adding battery packs. The maker lists 7.2 kW of output for the starter kit, expansion to 90 kWh of capacity and 21.6 kW of output, and up to 16.8 kW of solar input.

Each battery holds 6,144 Wh and uses LFP cells, with the maker listing more than 3,500 cycles before capacity falls to 80 percent. The starter kit is listed as able to power a 3-ton central air conditioner, and the system works at 120 V and 240 V. With the Smart Home Panel 2, the maker lists 20-millisecond automatic switchover and control of 12 circuits, which is the part that turns a portable stack into a wired home backup system.

The inverter weighs 32.1 kg net and measures 27.2 x 18.9 x 8.4 in, while each battery weighs 50.7 kg and measures 26 x 18 x 8 in. The inverter carries an IP54 rating and operates from minus 20 degrees C to 45 degrees C, with noise listed at 30 dB or less. Warranty is listed at 5 years. The stackable design fits a garage or utility room, and the maker notes that multi-battery setups are designed for stationary use, while single-battery setups can move on the trolley.

Pros:

  • Wide growth range from 6 kWh to 90 kWh of capacity
  • Strong 7.2 kW starter output with 240 V support
  • Fast 20-millisecond switchover with the Smart Home Panel 2
  • LFP battery rated for more than 3,500 cycles to 80 percent

Cons:

  • Full wired backup needs the separate Smart Home Panel 2
  • Each battery adds 50.7 kg, so a large stack needs floor space
  • Five-year warranty is shorter than the fixed units here

Buy it if you want a system that starts modest and can grow to a very large bank over time. Skip it if you want a fixed wall unit with a built-in solar inverter and a longer warranty from day one.

Anker SOLIX F3800

Anker SOLIX F3800 is a portable power station with 3,840 Wh of capacity and 6,000 W of continuous AC output, built to roll into place on wheels and grow with expansion packs. The maker lists a 9,000 W surge output, LFP chemistry with more than 3,000 cycles to at least 80 percent capacity, and a 5-year warranty.

Expansion is the core of this design. Up to six BP3800 expansion batteries at 3,840 Wh each lift one unit to 26,880 Wh, and two F3800 units together reach a maximum system configuration of 12 kW and 53.8 kWh. Solar input is listed at a maximum of 2,400 W across two 1,200 W inputs, and AC input recharge is listed at a maximum of 1,800 W. The EV port is listed at 3,000 W, and UPS switch time is listed at under 20 ms.

The unit measures 27.6 x 15.3 x 15.6 in including wheels and weighs 132.3 lb. It connects by Wi-Fi and Bluetooth for app control, and it carries two USB-A outputs at 12 W each and three USB-C outputs at 100 W each. The maker lists the unit as in stock on its Australian store page at the time of this guide, while availability varies by region, so check the store page for your market before planning around it.

Pros:

  • Wheels and handles make placement easy before it settles in one spot
  • Clear growth path to 26,880 Wh on one unit and 53.8 kWh on two
  • Strong 6,000 W output with a 9,000 W surge for heavy loads
  • Fast UPS switch time of under 20 ms

Cons:

  • Solar input tops out at 2,400 W, below the fixed solar units here
  • AC recharge is limited to 1,800 W on this listing
  • Base capacity of 3,840 Wh covers only light overnight loads alone

Buy it if you want a rolling unit that can start small, move into place, and grow pack by pack. Skip it if your solar array is large and you need high solar input, or if you want a fixed wall-mounted bank.

Generac PWRcell 2

Generac PWRcell 2 is a modular home energy storage system built around a battery cabinet that holds 3 kWh DCB battery modules. One cabinet configures from 9 kWh to 18 kWh, and two cabinets with one inverter reach 36 kWh, with maximum continuous power from 5.2 kW at M3 to 10.5 kW at M6 and 11.5 kW with two cabinets.

Each DCB module holds 3 kWh of usable capacity, gives 1.75 kW of maximum continuous power, and weighs 55 lb. Chemistry is lithium nickel manganese cobalt, which differs from the LFP chemistry used by the other five systems in this guide. Round-trip efficiency is listed at 88 percent. Battery modules carry a warranty of 10 years or 7.56 MWh of throughput, while the inverter, cabinet, and Smart Disconnect Switch carry a 10-year warranty.

The cabinet measures 10.75 x 23 x 70 in, with a total installed weight of up to 443 lb for the M6 configuration, and mounts on a wall with optional floor support. It is rated NEMA 3R for indoor and outdoor use, with charging from 23 degrees F to 122 degrees F and discharging from minus 4 degrees F to 122 degrees F. Maximum backup PV size is 15 kW for the M6 setup, maximum backup service is 200 A, and the Smart Disconnect Switch transfers in under 50 ms. The system pairs with Generac standby generators up to 28 kW, and every system includes an ecobee Smart Thermostat Enhanced.

Pros:

  • Module-by-module growth from 9 kWh to 36 kWh
  • Pairs with Generac standby generators up to 28 kW
  • Whole-home backup service up to 200 A with the Smart Disconnect Switch
  • Outdoor-rated cabinet with a 10-year module warranty

Cons:

  • NMC chemistry differs from the LFP units in this guide
  • Round-trip efficiency of 88 percent is the lowest listed here
  • A full M6 cabinet weighs up to 443 lb installed

Buy it if you already run a Generac generator or want module-by-module growth with 200 A backup service. Skip it if you prefer LFP chemistry across the whole bank, or if you want the highest round-trip efficiency in this set.

Buying guide

A home battery bank is a system, not a single box, and the buying decision starts with your loads, your solar array, and the space where the bank will live. The sections below walk through capacity, output, chemistry, solar input, and placement, using only the figures the makers publish for the six systems above.

Size a home battery bank to your nightly load

Start by listing what runs after sunset: fridge, lights, router, fans, and any medical or work equipment that must stay on. Add the watt-hours each load uses across the night, then compare that total with the usable capacity of the bank, not the headline nameplate figure, since usable capacity is what you can actually draw.

A 5.0 kWh block covers light overnight loads, while a 13.5 kWh or 15 kWh unit covers a fuller evening with cooking, laundry, and cooling. If your nightly total sits near the capacity of one unit, add a second unit or an expansion pack rather than running the bank to empty every night. Keep a reserve for an outage that lasts longer than one night, and remember that solar recharge the next day depends on weather and panel size.

Match continuous output to your largest loads

Capacity tells you how long a bank runs, while continuous output tells you what it can run at one moment. List your largest loads, such as an air conditioner, a well pump, an electric water heater, and a dryer, then check the continuous output of each system against the loads that may run at the same time.

Load start figures matter as much as continuous output, since motors draw a surge at startup. Tesla Powerwall 3 and FranklinWH aPower 2 both list 185 A of load start capability, while Generac PWRcell 2 lists up to 130 A of AC start capacity at M6. If your largest motor needs more start current than the bank lists, the bank may trip even when its capacity looks ample on paper.

Choose LFP or NMC chemistry with open eyes

Five of the six systems here use lithium iron phosphate chemistry, while Generac PWRcell 2 uses lithium nickel manganese cobalt. The makers publish different cycle and warranty terms for each chemistry, so compare those terms side by side instead of treating all lithium batteries as the same product.

Enphase lists more than 60 percent capacity after up to 15 years or 6,000 cycles, EcoFlow lists more than 3,500 cycles to 80 percent, and Anker lists more than 3,000 cycles to at least 80 percent. FranklinWH lists a 15-year or 60 MWh throughput warranty, Generac lists 10 years or 7.56 MWh for its modules, and Tesla lists a 10-year warranty. Read the warranty document for each system before you commit, since throughput and cycle limits shape the real coverage.

Plan solar input and backup switching

Solar input decides how fast a bank refills during the day. Tesla Powerwall 3 lists up to 20 kW of solar input with a built-in inverter, Generac PWRcell 2 lists up to 15 kW of backup PV at M6, EcoFlow DELTA Pro Ultra lists up to 16.8 kW, and Anker SOLIX F3800 lists up to 2,400 W.

Backup switching decides how fast the home moves to battery power when the grid drops. EcoFlow lists 20-millisecond switchover with its Smart Home Panel 2, Anker lists under 20 ms, and Generac lists under 50 ms for its Smart Disconnect Switch. Ask your installer which panel or switch each system needs, since several systems in this guide need a separate controller or panel for full wired backup.

Check space, weight, and outdoor ratings

Fixed home batteries are heavy, and the mounting plan matters as much as the spec sheet. FranklinWH aPower 2 weighs 357 lb, Tesla Powerwall 3 weighs 291.2 lb installed, Generac PWRcell 2 weighs up to 443 lb installed at M6, Enphase IQ Battery 5P weighs 174 lb installed, and Anker SOLIX F3800 weighs 132.3 lb with wheels.

Check the wall or floor rating, the clearances around the unit, and the enclosure rating for your climate. FranklinWH lists IP67 for its battery pack and inverter, EcoFlow lists IP54 for its inverter, and Generac lists NEMA 3R for its cabinet. Operating temperature ranges also vary, from minus 20 degrees C for several units to a 23 degrees F lower charging limit for Generac, so confirm the range fits your garage or outdoor wall.

FAQ

These questions cover the points buyers ask most often about fixed home battery banks: runtime, sizing, solar charging, outage behavior, and upkeep. Each answer uses the published figures for the six systems in this guide, and your installer can confirm how those figures apply to your home wiring and loads.

How long can a home battery bank run a house

Runtime depends on usable capacity and on how much power the house draws at each hour. A 5.0 kWh block running a 500 W load lasts about 10 hours in simple arithmetic, while a 15 kWh unit running the same load lasts about 30 hours, before inverter losses and reserve limits are counted.

Real homes draw uneven loads, with peaks for cooking and cooling and low draws overnight, so a single number never tells the full story. List your loads hour by hour, divide the usable capacity by the average draw, and keep a reserve for the next morning. If the math shows a shortfall, add capacity before you add output, since output alone cannot extend runtime.

How many batteries does a home need for whole-home backup

The count depends on capacity per unit and on the total load the home must carry. One FranklinWH aPower 2 at 15 kWh or one Tesla Powerwall 3 at 13.5 kWh can cover many homes, while one Enphase IQ Battery 5P at 5.0 kWh suits light loads and needs more units for a full home.

Modular systems let you count in blocks: EcoFlow grows by 6 kWh batteries to 90 kWh, Anker grows by 3,840 Wh packs to 26,880 Wh on one unit, and Generac grows by 3 kWh modules from 9 kWh to 36 kWh. Count the blocks you need for your nightly total, then check that the combined output covers your largest simultaneous loads before you finalize the count.

Can a home battery charge from solar panels

Yes, each system in this guide is designed to store solar energy, but the path differs by design. Tesla Powerwall 3 has a built-in solar inverter with up to 20 kW of input, FranklinWH aPower 2 is AC-coupled and works with all solar inverter brands, and Enphase IQ Battery 5P is AC-coupled with embedded microinverters.

EcoFlow DELTA Pro Ultra lists up to 16.8 kW of solar input, Generac PWRcell 2 lists up to 15 kW of backup PV at M6, and Anker SOLIX F3800 lists up to 2,400 W of solar input. Check the solar input limit against your array, and confirm with your installer whether your existing inverter needs any change for the battery you pick.

Do home batteries work during a grid outage

Yes, backup is the core purpose of these systems, but each one needs the right switching hardware to move the home to battery power. EcoFlow uses its Smart Home Panel 2 with 20-millisecond switchover, Generac uses its Smart Disconnect Switch with transfer in under 50 ms, and Enphase backup uses the IQ System Controller 3 or 3G.

Some systems also support off-grid operation, such as Tesla Powerwall 3 with up to 15.4 kW of off-grid discharge under the conditions its datasheet lists, and FranklinWH aPower 2, which the maker describes as off-grid ready. Confirm with your installer which loads sit on the backup panel, since whole-home and partial-home backup cover different circuits.

What upkeep does a fixed home battery need

Fixed home batteries need little daily attention, since the maker app handles monitoring and the battery management system handles charging. Enphase lists remote software and firmware updates, FranklinWH lists app monitoring of each unit, and EcoFlow lists app-based energy management for its system.

Plan for an annual visual check of the mounting, the cables, and the ventilation space around the unit, and keep the area clear of stored items that block airflow. Fan-free units such as FranklinWH aPower 2 and Enphase IQ Battery 5P still need clear space for natural convection, and outdoor units need their enclosure seals and mounting hardware checked after severe weather.

Conclusion

Pick the bank that fits your nightly load and your largest motor first, then check solar input, expansion room, and warranty terms. A single large unit suits many homes, while modular blocks suit homes that want to grow in steps, and either path works well when the numbers truly match the loads in your home.

Related guides

Browse all Buying Guides guides →