Portable chargers come in many sizes, and the right one depends on what you carry. A best batteries for portable chargers pick starts with capacity and output: a 10,000mAh bank covers a phone for a day, while a 24,000mAh bank keeps a laptop running. This guide compares six banks from Anker, Nitecore, UGREEN, and mophie.
Quick verdict
The Anker Prime 27,650mAh leads for raw power with 250W total output and a full recharge in under 43 minutes. The Anker 737 gives the same 140W single-port output in a smaller 24,000mAh body, while the Nitecore NB10000 Gen 4 leads for weight at 5 ounces. Pick the Anker Nano 10K for pockets and the mophie Ultra for built-in cables and wall prongs.
| Portable charger | Capacity | Max output | Ports | Weight |
|---|---|---|---|---|
| Anker Prime 27,650mAh | 27,650mAh | 250W total | 2 USB-C, 1 USB-A | Not listed |
| Anker 737 Power Bank | 24,000mAh | 140W | 2 USB-C, 1 USB-A | 22.22 oz |
| UGREEN Nexode 25,000mAh | 25,000mAh | 200W total | 2 USB-C, 1 USB-A | 592 g |
| Nitecore NB10000 Gen 4 | 10,000mAh | 22.5W | 2 USB-C | 5 oz |
| Anker Nano 10K 45W | 10,000mAh | 45W | USB-C cable, USB-C, USB-A | Not listed |
| mophie Powerstation Plus Ultra 10K | 10,000mAh | 30W | USB-C cable, USB-C, Lightning | 0.79 lbs |
How we selected batteries for portable chargers
Every portable charger in this guide comes from a maker page opened and read in full. Capacity, output, ports, and size come from the spec tables on those pages, and each of the six was in stock on the maker site when this guide was written. No figure comes from a search snippet or a review.
The six cover the main sizes: three 10,000mAh banks for pockets and day bags, and three 24,000mAh to 27,650mAh banks for laptops and long trips. Output runs from 22.5W for light trail use to 250W for two laptops at once. A bank earns a place here by fitting one of those jobs with figures the maker states.
The six batteries for portable chargers
These six portable chargers span the full range from pocket banks to laptop banks. Each section lists the capacity, output, ports, and size from the maker page, then the strengths and limits that follow from those figures. Match the bank to the devices you carry, not to the biggest number on the box.
Anker Prime 27,650mAh Power Bank (250W)
The Anker Prime 27,650mAh is the most powerful portable charger in this guide, with 250W total output across two USB-C ports and one USB-A port. A single USB-C port delivers up to 140W, and the maker states it can charge a 16-inch MacBook Pro to 50 percent in 28 minutes. Recharging the bank takes under 43 minutes at up to 140W input.
The bank pairs with an app over Bluetooth for real-time stats, smart charging, and a find-my-device sound alert, and it carries a smart display. The maker notes that input can reach 170W when both USB-C ports are used with a 140W charger, normally when the battery level is above 55 percent. ActiveShield 2.0 runs the safety checks, and the bank lists iPhone, iPad, Samsung, Pixel, MacBook, Steam Deck, and Nintendo Switch among the devices it charges.
- 250W total output, 140W max from a single USB-C port
- Full recharge in under 43 minutes at 140W input
- App control and smart display over Bluetooth
- Weight and size are not listed on the maker page
- 27,650mAh is larger and heavier than a pocket bank
- 170W input needs both USB-C ports and a 140W charger
Buy this if you charge a laptop and a phone together and want the fastest refill. Skip it if you want the lightest bank for a pocket or a trail run, where the Nitecore Gen 4 fits better.
Anker 737 Power Bank (24,000mAh, 140W)
The Anker 737 Power Bank holds 24,000mAh and delivers up to 140W from a USB-C port, with two USB-C ports and one USB-A port for three devices at once. The maker lists a smart digital display that shows output and input power and the estimated time to a full recharge. The bank measures 6.13 by 2.15 by 1.95 inches and weighs 22.22 ounces.
Reaching 140W needs a cable that supports PD 3.1 and a device that accepts PD 3.1 input, such as the 2021 MacBook Pro 16. The display draws a small amount of power when left on: the maker states 0.36W, using about 15 percent of the battery in 24 hours, and advises turning the display off when it is not in use. The bank was in stock on the maker site when this guide was written.
- 24,000mAh with 140W max output from a USB-C port
- Smart digital display with input, output, and recharge time
- Three ports charge three devices at once
- 22.22 ounces is heavy for a pocket
- 140W needs a PD 3.1 cable and a PD 3.1 device
- Display left on drains about 15 percent of the battery in a day
Buy this if you want 140W laptop charging in a bank smaller than the Anker Prime. Skip it if weight matters most, since the Nitecore Gen 4 weighs about a quarter as much.
UGREEN Nexode Power Bank 25,000mAh 200W
The UGREEN Nexode 25,000mAh bank delivers 200W total output, with USB-C1 at up to 140W and USB-C2 at up to 100W, plus a USB-A port at up to 22.5W. The capacity is 25,000mAh, or 90Wh, which sits under the 100Wh limit for carry-on luggage. The TFT display shows the remaining battery, real-time voltage and current, and power in and out.
The bank measures 131 by 54 by 50.8 mm and weighs 592 grams, and it recharges at up to 65W through either USB-C port. The maker lists compatibility with MacBook Pro 16 and Air 15, iPad Pro and Air, iPhone 15 and 14 series, Apple Watch, AirPods, Galaxy S24 and S23 series, and Huawei devices. The bank was in stock on the maker site when this guide was written.
- 200W total output, 140W from USB-C1 and 100W from USB-C2
- 90Wh capacity, under the 100Wh carry-on limit
- TFT display with voltage, current, and power readouts
- 592 grams is heavy for a pocket or a light day bag
- Recharge tops out at 65W, slower than the Anker Prime
- USB-A port tops out at 22.5W
Buy this if you charge two laptops at once and want a display that shows live voltage and current. Skip it if you need the fastest bank recharge, where the Anker Prime refills in under 43 minutes.
Nitecore NB10000 Gen 4
The Nitecore NB10000 Gen 4 is the lightest portable charger in this guide at 5 ounces, with a 10,000mAh cell rated at 3.9 volts, or 39Wh. Two USB-C ports deliver up to 22.5W each, with 15W total when both are in use, and the bank recharges at up to 22.5W. The body measures 4.57 by 1.84 by 0.57 inches and carries an IPX7 water resistance rating.
The rated energy at 5 volts is 6,800mAh in regular mode and 7,200mAh in eco mode, which is the energy that reaches your devices after conversion. A lanyard-style USB-C cable is included, and the bank adds RGB lighting around the ports, a knock-to-wake function for power checks, and pass-through charging. The maker notes the bank is not designed for underwater use and should be dried after a dunk. The bank was in stock on the maker store when this guide was written.
- 5 ounces, the lightest bank in this guide
- IPX7 water resistance for rain and wet conditions
- Lanyard USB-C cable included, plus pass-through charging
- 22.5W max output, the lowest in this guide
- 15W total when both ports are in use
- Not designed for underwater use despite the IPX7 rating
Buy this if you hike, run trails, or travel light and need a bank that shrugs off rain. Skip it if you charge a laptop, since 22.5W is too low for most laptop charging.
Anker Nano Power Bank 10K 45W with Retractable USB-C Cable
The Anker Nano 10K packs 10,000mAh, or 36Wh, into a pocket bank with a built-in retractable USB-C cable that extends to 2.3 feet and locks at several lengths. The cable and the USB-C port each deliver up to 45W on their own, and the bank recharges at up to 30W, taking about 2 hours and 10 minutes with a 30W or stronger charger.
The retractable cable is rated for 20,000 bends and 20,000 pulls, and the bank adds a USB-A port for a third device, pass-through charging, and the ActiveShield safety system, which runs 6 million temperature checks a day. When several ports are in use, output splits: the cable plus the USB-C port give 15W and 7.5W, the USB-C port plus the USB-A port give 15W and 7.5W, and all three ports give 7.5W each. The bank was in stock on the maker site when this guide was written.
- Built-in retractable USB-C cable, 2.3 feet, rated for 20,000 bends
- 45W max output from the cable or the USB-C port
- Light-sensitive display and pass-through charging
- Multi-port output drops to 7.5W per port with three devices
- Recharge takes about 2 hours and 10 minutes
- Size and weight are not listed on the maker page
Buy this if you hate carrying loose cables and want a pocket bank that charges a phone fast. Skip it if you charge three devices at once often, since shared output drops sharply.
mophie Powerstation Plus Ultra 10K
The mophie Powerstation Plus Ultra 10K is the only bank in this guide with folding wall prongs, so it recharges straight from a wall outlet with no charger brick. It holds 10,000mAh and offers a 30W USB-C port, a 30W integrated USB-C cable, and a 20W integrated Lightning cable, charging up to three devices at once.
The USB-C port can charge an iPhone 15 Pro to 50 percent in 25 minutes, and the maker states the bank can provide up to two full phone charges. Pass-through charging sends power to the phone first, then to the bank, and the integrated cables use Eduraflex silicone rated for 30,000 bends. The frame is aluminum with a soft-touch silicone exterior, and the bank carries a two year warranty. The bank was in stock on the maker site when this guide was written.
- Folding wall prongs recharge the bank with no brick
- Integrated USB-C and Lightning cables, both rated for 30,000 bends
- 30W USB-C port and cable, 20W Lightning cable
- 0.79 pounds is heavy for a 10,000mAh bank
- Lightning cable tops out at 20W
- No USB-A port for older accessories
Buy this if you want a bank that recharges from any wall outlet and carries its own cables. Skip it if you want the lightest 10,000mAh bank, since the Nitecore Gen 4 weighs about half as much.
Buying guide
Pick a portable charger by matching capacity and output to the devices you carry. A phone needs 10,000mAh and 20W or more, a tablet needs 10,000mAh and 30W or more, and a laptop needs 24,000mAh and 100W or more. These five points cover the choices that decide whether the bank keeps your devices running.
Capacity and watt hours for portable chargers
Capacity in milliamp hours tells you how much charge the bank holds, and watt hours tell you whether it can fly. Banks under 100Wh travel as carry-on with no airline approval, and the banks here run from 36Wh to 90Wh, except the Anker Prime at 27,650mAh, whose watt hour figure the maker page does not state.
The rated energy at 5 volts is the figure that reaches your devices after conversion, and it runs lower than the headline capacity. The Nitecore Gen 4 lists 6,800mAh to 7,200mAh at 5 volts against a 10,000mAh cell, so plan trips around the rated figure, not the headline. A 10,000mAh bank gives one to two phone charges, while a 24,000mAh bank gives several.
Output power for phones, tablets, and laptops
Output in watts sets how fast a device charges and whether a laptop charges at all. Phones charge well at 20W to 45W, tablets at 30W to 45W, and laptops need 65W to 140W from a USB-C port. The Anker Prime and Anker 737 deliver 140W from a single port, the UGREEN Nexode delivers 140W from USB-C1, and the Nitecore Gen 4 tops out at 22.5W.
Check the output per port, not just the total. A bank that lists 250W total may give 140W from one port and far less from the others, and multi-port use splits the power. The Anker Nano drops to 7.5W per port with three devices, so a bank that charges one device fast may charge three devices slowly.
Ports and built-in cables
Ports decide how many devices charge at once and which cables you carry. Two USB-C ports and one USB-A port cover most kits, and the Anker Prime, Anker 737, and UGREEN Nexode all use that layout. The Nitecore Gen 4 uses two USB-C ports only, with a USB-C to USB-A adapter in the box on the older Gen 3.
Built-in cables save you from carrying loose cords. The Anker Nano hides a retractable USB-C cable in the body, and the mophie Ultra carries integrated USB-C and Lightning cables plus a USB-C port. Pick built-in cables when you travel light, and pick spare ports when you charge several devices with your own cables.
Recharge time and pass-through charging
Recharge time sets how long the bank sits on the wall between trips. The Anker Prime refills in under 43 minutes at 140W input, the Anker Nano takes about 2 hours and 10 minutes at 30W, and the UGREEN Nexode recharges at up to 65W. A faster input means the bank is ready sooner after a long day.
Pass-through charging lets the bank charge a device while the bank itself recharges. The Anker Nano, Nitecore Gen 4, and mophie Ultra all support it, and the Anker Nano gives the connected device priority until about 80 percent charge. Pick pass-through when you charge overnight with one outlet for the bank and the phone.
Size, weight, and weather resistance
Size and weight decide whether the bank lives in a pocket or a bag. The Nitecore Gen 4 weighs 5 ounces and measures 4.57 by 1.84 by 0.57 inches, the mophie Ultra weighs 0.79 pounds, the Anker 737 weighs 22.22 ounces, and the UGREEN Nexode weighs 592 grams. The Anker Prime and Anker Nano pages do not list weight or size.
Weather resistance matters outdoors. The Nitecore Gen 4 carries an IPX7 rating for rain and wet conditions, though the maker notes it is not designed for underwater use. The other banks in this guide list no water resistance rating, so keep them dry and pack them in a sealed pocket in the rain.
FAQ
These answers cover the questions shoppers ask most about portable chargers. Each answer uses only the figures from the maker pages in this guide, and where a page stays silent, the answer says so. Bring your device list when you compare banks, and check the wattage each device needs.
What size portable charger do I need for a phone
A 10,000mAh bank covers a phone for a day or two, giving one to two full charges depending on the phone. The Nitecore Gen 4, Anker Nano 10K, and mophie Ultra all hold 10,000mAh, and the mophie maker states up to two full phone charges from its 10,000mAh bank.
For a phone plus a tablet or earbuds, a 10,000mAh bank still works, but a 20,000mAh or larger bank gives more headroom. For a laptop, step up to 24,000mAh or 27,650mAh with 100W or more from a USB-C port, since a phone-size bank cannot feed a laptop.
Can I take a portable charger on a plane
Yes, when the bank is under 100Wh and carried in cabin luggage. The Anker Nano is rated at 36Wh, the Nitecore Gen 4 at 39Wh, and the UGREEN Nexode at 90Wh, all under the 100Wh limit. The Anker 737 page does not state a watt hour figure, and neither does the Anker Prime page.
Airlines ask that power banks travel in carry-on luggage, not in checked bags. Check the watt hour figure printed on the bank before you fly, and keep the bank in your cabin bag where the crew can reach it.
How fast can a portable charger recharge itself
Recharge speed depends on the input wattage the bank accepts and the charger you use. The Anker Prime refills in under 43 minutes at 140W input, the UGREEN Nexode recharges at up to 65W, and the Anker Nano takes about 2 hours and 10 minutes with a 30W or stronger charger.
Use a charger that matches the bank input for the fastest refill. A 30W charger refills the Anker Nano in about 2 hours and 10 minutes, while a weaker charger takes longer. The Nitecore Gen 4 accepts up to 22.5W input, and the mophie Ultra recharges from its wall prongs or its USB-C cable.
What does 10,000mAh really charge
The headline capacity is measured at the cell voltage, and conversion losses cut what reaches your devices. The Nitecore Gen 4 lists a rated energy of 6,800mAh at 5 volts in regular mode and 7,200mAh in eco mode, against a 10,000mAh cell, which is the energy that actually reaches a phone.
For a phone with a battery near 4,000mAh, a 10,000mAh bank gives about one and a half to two full charges after losses. The mophie Ultra maker states up to two full phone charges from 10,000mAh, which matches that range. Plan trips around the rated energy, not the headline figure.
Do portable chargers work in the rain
Only the Nitecore Gen 4 in this guide lists a water resistance rating, IPX7, for rain and wet conditions. The maker notes the bank is not designed for underwater use and should be dried thoroughly after a dunk, so rain and splashes are fine but immersion is not.
The other five banks list no water resistance rating on their maker pages. Keep them dry in the rain, pack them in a sealed pocket or dry bag outdoors, and dry the ports before you plug in a cable.
Conclusion
Match the bank to the job: the Anker Prime leads for laptops at 250W, the Anker 737 and UGREEN Nexode give 140W laptop charging, and the Nitecore Gen 4 leads for weight and rain. The Anker Nano fits pockets with its retractable cable, and the mophie Ultra adds wall prongs and built-in cables. Pick the capacity and output your devices need.
Write Your Review
No reviews yet. Be the first to share your experience!