A video light is only as dependable as the pack that feeds it, and the best batteries for video lights pair a clear watt-hour rating with the right mount for the job. This guide compares six packs listed for sale: two NP-F970 packs, two compact V-mount batteries, and two small NP-F550 cells, with capacity and runtime figures from the product pages.

Quick verdict

If you need one answer fast, match the battery to the light first and worry about brand second. A small on-camera panel runs happily on an NP-F970 or even an NP-F550, while a 60W panel needs a V-mount pack near 99Wh to last an hour. The six packs below cover both ends of that range.

The short answer

For most on-camera lights, the Neewer NP-F970 two-pack gives the best balance of capacity and charging convenience, since each 7,800mAh pack charges through USB-C. If you run a brighter panel, either 99Wh V-mount pack in this guide will carry it far longer than any NP-F cell.

Who should pick which size

Run-and-gun shooters with a small LED panel should start with NP-F packs, because they slide straight onto the light and weigh little. Studio and location crews with panels of 60W or more should step up to a V-mount pack, which carries more energy and more output ports in one block.

How we selected the best batteries for video lights

Every pack in this guide was verified on a product page that was actually opened, with the listing showing the pack available for order. Capacity, voltage, charging, and compatibility figures come from those pages, and packs that showed no availability or no usable specification were left out of the list.

What the watt-hour rating tells you

Watt-hours measure stored energy, so they predict runtime better than milliamp-hours alone. A 56Wh pack feeding a 20W light lasts about two and a half hours in theory, while a 99Wh pack feeding the same light lasts close to five hours. Compare watt-hours first, then check the mount.

Why USB-C charging changes the workflow

Several packs in this guide charge through a USB-C port, which means a phone charger or power bank can refill them between setups. That removes the need to carry a dedicated charger on a small shoot, though a dedicated charger still refills a pack faster in most cases. Check the listed charge time before you rely on USB-C alone.

Fit and mount checks before you buy

NP-F packs slide onto a rail mount found on many LED panels, monitors, and camcorders, while V-mount packs lock onto a larger plate and suit bigger rigs. Measure the battery bay on your light and confirm the mount type in the listing, because an NP-F970 is thicker than an NP-F550 and may not fit a shallow bay.

Six batteries for video lights

The six packs below span three size classes. Two NP-F970 packs cover mid-size on-camera lights, two 99Wh V-mount packs cover brighter panels, and two NP-F550 cells cover small panels and accessories. Each entry lists the verified figures from its product page, followed by the strengths and the limits worth knowing.

Neewer NP-F970 two-pack with USB-C charging

Neewer sells this pack as a two-pack under model TP-F970, and each cell is rated 7.2V, 7,800mAh, and 56.16Wh. The pack charges through a bidirectional USB-C port at up to 20W, with a full charge listed at 3.5 hours, and a USB-A port is also fitted. Four LED indicators show the charge level in quarters.

The pack is listed as compatible with the full NP-F range from F550 to F975, and with Sony cameras, Handycam camcorders, Neewer LED panels, ring lights, and field monitors. The listing shows the two-pack in stock and sold by Onestone NY Inc through Best Buy. Circuit protection is listed on the product page.

The genuine Sony NP-F970 sets the baseline for this size class: the maker lists it at 7.2V, 47.4Wh, and 6,600mAh, with an InfoLITHIUM microprocessor that reports remaining time in minutes and a mass of about 225 g. Both NP-F970 packs in this guide list higher capacities than that original, which is normal for third-party cells, but the Sony figure is the one to use when you want a conservative runtime estimate for a light.

The strengths of this pack are easy to list. Two cells arrive in one box, so a spare is always in the bag, and USB-C charging means a common phone charger can refill either cell. A second pack also covers the case where one cell is still charging when the shoot starts. The four LED indicators make it easy to check the remaining charge at a glance, and the 7,800mAh rating sits above the 6,600mAh figure of the genuine Sony NP-F970.

A few limits deserve a note before you buy. The USB-C charge rate is capped at 20W, so a full charge takes 3.5 hours even with a stronger charger. The pack is thicker than an NP-F550, so check that your light has room for it. The listing does not state a cycle-life figure, so no cycle count is given here.

SmallRig NP-F970 USB-C battery, 10,500mAh

SmallRig lists this green L-series battery at 10,500mAh and 76.65Wh, with a 7.3V output. The USB-C port supports PD 3.0 input and output at up to 36W, and the USB-A port outputs up to 27W, so the pack can also work as a power bank for a phone or tablet. A full charge takes about 3.5 hours with a 36W PD charger.

Touch buttons and a battery level display sit on the pack, and the maker lists a fire-resistant casing with overcharge protection. The pack measures 74.6 by 71.6 by 38.5 mm and weighs 362 g, with an operating range of 0 to 45 degrees C. The B and H listing shows it in stock as part of a kit with an L-series battery plate and an FZ-100 dummy battery cable.

The kit that carries this battery also includes an L-series battery plate and an FZ-100 dummy battery cable, which lets the pack feed a camera body that takes an NP-FZ100 cell. The questions section on the listing confirms the battery powers a Nanlite wand RGB LED light, and the maker lists compatibility with Atomos products and Sony Handycam models such as the HVR-Z5U and the CCD-TRV87.

The strengths of this pack are easy to list. Its 76.65Wh rating is the largest of any NP-F pack in this guide, and the 36W USB-C port charges it faster than the 20W port on the Neewer pack. The display screen gives a clearer reading than a row of LEDs, and the dummy battery cable lets it power a camera body as well as a light.

A few limits deserve a note before you buy. The pack is sold through B and H as a kit, so the listed contents include a plate and cable that add to the box. At 362 g it is heavier than a standard NP-F970, and the operating range tops out at 45 degrees C, which matters on a hot location shoot. The listing does not state a cycle-life figure.

SmallRig VB99 mini V-mount battery, 98.872Wh

SmallRig lists this mini V-mount pack at 98.872Wh, 14.54V, and 6,800mAh, built from LG A-grade 18650 cells. The pack carries BP, D-Tap, 8V-OUT DC, 12V-OUT DC, USB-C, and USB-A ports, and the USB-C port supports 100W bidirectional PD fast charging. An OLED screen shows battery level, remaining usage time, voltage, and power.

The maker lists certifications including MSDS, UN38.3, IEC 62133, UL2054, and UL 62368, plus CCC, FCC, CE, and RoHS, and describes the casing as fire-resistant PC material. A battery management system guards against overcurrent, short circuits, over-temperature, and over-voltage. The Best Buy listing shows model 4929 in stock, sold by Adorama, and lists LED video lights among the devices it powers.

The OLED screen is the feature that sets this pack apart from the NP-F cells, since it shows remaining usage time in addition to the charge level, voltage, and power draw. The 98.872Wh rating sits just under the 100Wh threshold that many airlines use for carry-on lithium batteries, which makes it easier to fly with than a larger V-mount pack. The listing names LED video lights, monitors, follow focus systems, and image transmitters among the devices it powers.

The strengths of this pack are easy to list. Six output ports let one pack feed a light, a monitor, and a phone at the same time, and 100W USB-C charging refills it quickly between setups. The OLED screen shows remaining usage time rather than a rough LED count, and the 98.872Wh rating stays under the 100Wh limit that many airlines set for carry-on batteries.

A few limits deserve a note before you buy. The pack is larger and heavier than any NP-F cell, so it needs a V-mount plate or a rig rather than a slide-on light mount. The listing does not state a weight figure, so no weight is given here. The listing also does not state a cycle-life figure, so no cycle count is given here.

Neewer PS099EP mini V-mount battery, 99Wh

Neewer lists the PS099EP at 6,800mAh and 99Wh, with a 14.5V output. Dual USB-C ports deliver up to 100W of two-way PD fast charging, and a full charge takes 2 hours with a 100W GaN charger. The pack also carries a USB-A port, a DC 8V port, a DC 12V port, a BP port, and a D-Tap port, with total output capped at 100W across all ports.

A 1.96-inch OLED screen shows battery status in real time, and the maker lists a battery management system that guards against short circuits, over-voltage, over-current, overcharging, and over-discharge, with alerts for over-power and overheating. The shell is fire-resistant PC V0 material, and the pack measures 115 by 77 by 60 mm and weighs 630 g. The maker states it provides 1.32 hours of power for the Neewer MS60C LED video light.

The listed 1.32-hour figure for the Neewer MS60C light is worth a closer look. Dividing the 99Wh rating by the 60W draw gives 1.65 hours on paper, so the listed 1.32 hours reflects the losses between the pack and the light. That gap is normal, and it is the reason this guide quotes maker runtime figures where they exist instead of relying on the division alone.

The strengths of this pack are easy to list. A two-hour full charge is the fastest in this guide, and the port set covers almost any rig accessory. The OLED screen and the alert system make it easy to spot a problem early, and the listed 1.32-hour figure for a real 60W light gives a concrete runtime anchor instead of a guess.

A few limits deserve a note before you buy. The 100W total output cap means running several hungry devices at once can hit the limit sooner than the port count suggests. At 630 g the pack adds noticeable weight to a handheld rig, and the listing does not state a cycle-life figure, so no cycle count is given here.

FEELWORLD NP-F550 battery, 2,200mAh

FEELWORLD lists this NP-F550 cell at 2,200mAh, with USB-C charging at 5V and 2A and a full charge in about 2 hours. A dedicated charger at 8.4V takes about 4 hours. An LED battery indicator is fitted, and the listing states the pack is available in one-pack and two-pack variants, and only in the US and EU.

The listing is clear about the limits of this cell: it has no decoding function and is unsuitable for a camera or camcorder, and it is aimed at field monitors, video lights, wireless video transmission, and sliders. The official store shows the pack in stock. No cycle-life figure is listed on the product page.

The FEELWORLD cell is the only pack in this guide that states a regional limit, with sales only in the US and EU. That limit is worth noting for buyers elsewhere, since the pack is otherwise a straightforward spare for a small panel. The LED indicator shows the charge state during charging, and the two-pack variant gives a matched pair for a two-light setup.

The strengths of this pack are easy to list. USB-C charging at 2 hours is fast for a small cell, and the pack is light enough to disappear into a pocket or a light bag. The one-pack and two-pack options let a shooter buy a single spare or a matched pair, and the price class is far below a V-mount pack.

A few limits deserve a note before you buy. The 2,200mAh rating is the smallest in this guide, so it suits a small panel or a monitor rather than a bright light. The lack of decoding means it cannot report remaining time to a camera, and the US and EU only availability may rule it out for buyers elsewhere.

Kastar NP-F550 two-pack, 2,900mAh

Kastar lists this two-pack at 7.4V and 2,900mAh per cell, as a replacement for Sony NP-F550 and NP-F570 packs. The Newegg listing names a long compatibility list for LED video lights, including the Neewer CN-126, CN-160, CN-216, and CN-304 panels, the RGB450, RGB530, RGB650, and RGB660 lights, and the Yongnuo YN300, YN600, YN900, and YN1200 series.

Two cells arrive in the box, so a shoot starts with a charged spare already in the bag. The 2,900mAh rating is the largest of the two NP-F550 cells in this guide, and the 7.4V figure matches the NP-F550 standard. The listing does not state a charge time, a cycle-life figure, or a USB charging port, so none of those figures is given here.

The compatibility list on the Newegg page is the widest in this guide, and it matters because NP-F550 cells are sold for dozens of lights that share the same mount. The list covers Neewer panels from the CN-126 up to the 660 PRO RGB, plus the P200 and P280 panels and the Yongnuo YN300, YN600, YN900, and YN1200 series. Matching your exact light model against that list is the fastest way to confirm fit.

The strengths of this pack are easy to list. The compatibility list is the most detailed in this guide, naming dozens of specific Neewer and Yongnuo lights by model. Two cells for one purchase keeps the per-cell cost low, and the 2,900mAh rating gives about a third more capacity than the FEELWORLD cell above.

A few limits deserve a note before you buy. No availability figure is listed on the product page, so stock should be checked again at publish time. No USB charging port is listed, so a dedicated NP-F charger is needed. The listing also does not state a weight figure, so no weight is given here.

How long do video light batteries last on one charge

Runtime comes from a simple division: divide the watt-hour rating by the watts the light draws, then knock off a margin for conversion losses. A 99Wh pack feeding a 60W light gives about 1.65 hours on paper, and the maker of the PS099EP lists 1.32 hours for its own 60W light, which shows how the margin works in practice.

The watt-hour math that predicts runtime

Take the watt-hour figure from the listing and divide it by the wattage of the light at the brightness you use. A 56.16Wh NP-F970 feeding a 20W panel gives about 2.8 hours, while the same pack feeding a 40W panel gives about 1.4 hours. That math holds across all three size classes in this guide.

Why a light draws more at full brightness

An LED panel draws far less power at half brightness than at full brightness, so the runtime you get depends on the dimmer setting as much as on the battery. A pack that lasts two hours at full output can last three or four hours at a lower setting. Plan the shoot around the brightest setting you will use.

Do video light batteries need a special charger

Not always, and the answer depends on the pack. Three of the six packs in this guide charge through USB-C, so a phone charger or a laptop charger can refill them. The other three need a dedicated charger, either an NP-F charger for the small cells or a V-mount charger for the larger packs. Check the listing before you assume it charges alone.

USB-C charging vs a dedicated charger

USB-C charging is convenient, but a dedicated charger is usually faster and can charge two cells at once. The FEELWORLD NP-F550 charges in about 2 hours through USB-C and about 4 hours on its dedicated 8.4V charger, while the SmallRig NP-F970 needs a 36W PD charger to hit its 3.5-hour figure.

What to do when the battery has no USB port

When a pack has no USB port, buy the charger with the battery and keep a second cell charged. NP-F chargers are small and cheap, and many charge two cells at once, while V-mount chargers are larger and cost more. A dual charger that covers both NP-F550 and NP-F970 sizes is a good buy if you run more than one light.

Buying and charging checklist

Before you buy, confirm the mount, the watt-hour rating, and the charging method, and after the pack arrives, charge it fully and check that it seats firmly on the light. A pack that wobbles on its mount can lose contact mid-take, and a pack bought for the wrong mount is a return, not a spare.

Before you check out

Confirm the mount type on your light, the watt-hour rating against the runtime you need, and whether the pack charges through USB-C or needs a dedicated charger. Check that the listing shows the pack in stock, and read the compatibility list for your exact light model.

Pick the pack that matches the light, not the biggest number on the shelf. A 99Wh V-mount suits a 60W panel for an hour or more, an NP-F970 keeps a small on-camera light going for hours, and a spare NP-F550 costs little and weighs almost nothing. Check the mount, read the watt-hour rating, and carry one spare.

Related guides

Browse all Buying Guides guides →