A console fills up fast once a few large games land on it, and deleting titles to make room gets old quickly. The best external hard drives for consoles add room without opening the console, and the right pick depends on which console you own and which games you want to run from the drive. This guide compares five drives with published specs.

Quick verdict

If you own a PS4 or an Xbox One, a roomy HDD is the easy pick, since those consoles run older games straight from USB storage. If you own a PS5 or an Xbox Series X or Series S, treat any USB drive as an archive, because current-generation games must live on internal storage to run. The table below lines up the five drives at a glance.

The fastest drive here is the WD_BLACK P40 Game Drive SSD, with read and write speeds up to 2,000 MB/s on its 1TB and 2TB models. That speed only shows up in full when the host port supports USB 3.2 Gen2x2, so console owners will see part of it rather than all of it. Even so, moving a large game between the drive and the console goes much faster than re-downloading it, and that is the real job of an external SSD on a current console.

The Samsung Portable SSD T7 Shield 1TB is the rugged pick. It reads at up to 1,050 MB/s, writes at up to 1,000 MB/s, and carries an IP65 rating for dust and water protection plus drop resistance up to 3 meters. At 98 g and 59 x 88 x 13 mm, it is small enough to ride in a jacket pocket, and the maker lists gaming consoles among the devices it connects to. It suits a player who carries games between rooms or between homes.

For sheer room, the WD_BLACK P10 Game Drive leads the group, with capacities up to 6TB and room for up to 150 games based on a 36 GB average game size. It is a hard drive, so its read speed tops out at 130 MB/s, but that is enough for PS4 titles played directly from the drive and for storing PS5 titles until they move back inside. The two WD My Passport drives round out the list with 2TB of room, 256-bit AES hardware encryption, and a 3-year limited warranty each.

Drive Type Best for Key spec Main limit
Samsung Portable SSD T7 Shield 1TB Portable SSD Travel and fast transfers Read up to 1,050 MB/s Top speed needs a USB 3.2 Gen 2 port
WD_BLACK P10 Game Drive Portable HDD Large PlayStation libraries Capacity up to 6TB Read speed up to 130 MB/s
WD_BLACK P40 Game Drive SSD Portable SSD Fast transfers and RGB style Read and write up to 2,000 MB/s Full speed needs a USB 3.2 Gen2x2 port
WD My Passport for Mac 2TB Portable HDD Mac owners with a console 2TB with 256-bit AES encryption Micro-B connector
WD My Passport 2TB Portable HDD A large library on a simple drive 2TB with 256-bit AES encryption No published sustained read speed

How we selected the best external hard drives for consoles

Every drive below is a current portable drive with published specs from the maker, and the figures in this article come from those published specs. We ranked drives by console fit first: whether the drive suits PS4, PS5, Xbox One, or Xbox Series X and Series S, and whether games can run from it or only rest on it.

Capacity came next. Modern games are large, so a drive earns its place by holding a real library rather than two or three titles. The drives here span 1TB to 6TB, with most of the list sitting at 2TB, which holds dozens of games. Interface and speed matter too, because a slow link turns every transfer into a wait, so the guide favors USB 3.2 connections and states the published speed of each drive.

Build and warranty rounded out the ranking. A drive that travels between rooms or to a friend’s home should handle knocks, and a longer warranty term signals that the maker stands behind the hardware. The Samsung T7 Shield brings an IP65 rating and drop resistance up to 3 meters, the WD_BLACK P40 brings a shock-resistant structure rated for a drop of up to two meters, and the WD_BLACK P40 carries a 5-year limited warranty while the other four drives carry a 3-year limited warranty. Where a maker does not state a figure, the article says so rather than filling the gap.

Five external drives for consoles

The five drives below cover the two main shapes of console storage: fast portable SSDs and roomy portable HDDs. Two are built for gaming, one is built for rough travel, and two are drives that work well as console storage. Read each one with your console in mind, because the same drive can be a star on a PS4 and an archive box on a PS5.

Samsung Portable SSD T7 Shield 1TB

The T7 Shield is the toughest drive in this guide. Samsung lists it in 1TB, 2TB, and 4TB capacities, and the 1TB model measures 59 x 88 x 13 mm and weighs 98 g. It connects over USB 3.2 Gen 2 at 10 Gbps and posts sequential read speeds up to 1,050 MB/s with sequential write speeds up to 1,000 MB/s, which makes moving large game files quick.

The rugged shell is the reason to pick this drive over a plain portable SSD. Samsung rates it IP65 for dust and water protection and says the design can endure a drop of up to 3 meters. The rubberized grip keeps it from sliding off a shelf, and the maker lists gaming consoles among the devices it connects to, alongside Macs, PCs, and Android devices. For a player who carries a drive to a friend’s home, that toughness has real value.

Encryption is built in. The drive uses AES 256-bit hardware encryption, and Samsung supplies portable SSD software for setting a password and getting firmware updates, plus Samsung Magician software for checking drive health. The software runs on PCs, Macs, and Android devices, and firmware updates need a PC or Mac with internet access. The warranty is a limited 3-year term.

On a PS4 or an Xbox One, the T7 Shield works as ordinary external storage, holding games that can run straight from the drive. On a PS5 or an Xbox Series X or Series S, it works as an archive: current-generation games rest on it and move back to internal storage before they run. That rule comes from the consoles, not from the drive, and it applies to every USB drive. The drive’s speed still pays off, because copying a game back from USB is far quicker than downloading it again.

Pros: fast read and write speeds, a compact and light body, IP65 dust and water protection, drop resistance up to 3 meters, and AES 256-bit hardware encryption.

Cons: the top speed needs a USB 3.2 Gen 2 port with UASP mode, the 1TB model holds fewer games than the HDDs in this guide, and the encryption software needs a computer rather than a console to set up.

Buy if you want a fast, rugged SSD that can travel with your game library and move files quickly.

Skip if you need the largest possible capacity and would rather trade speed for room.

WD_BLACK P10 Game Drive

The P10 is the capacity pick of this guide. The maker lists it in 2TB, 5TB, and 6TB capacities, and the data sheet says the top capacity can hold up to 150 games based on a 36 GB average game size. It is a portable hard drive built for gamers, and it works with PlayStation 5 and PlayStation 4 Pro or PS4 with system software version 4.50 or higher.

Speed is modest, and the maker is plain about it: read speeds run up to 130 MB/s over a USB 3.2 Gen 1 interface. That is far below the SSDs in this guide, yet it is enough for PS4 games played directly from the drive, and it is enough for archiving PS5 games. The trade is simple and honest: a hard drive gives you far more room than an SSD of the same size, and the cost is slower transfers.

The drive is built to travel. It measures 4.65 in long and 3.46 in wide, with a height of 0.57 in on the 2TB model and 0.91 in on the 5TB and 6TB models. The box holds the drive, a USB Type-A to Micro-B cable, and a quick install guide. The maker lists an operating temperature range of 5 degrees C to 35 degrees C and a non-operating range of minus 20 degrees C to 65 degrees C. The warranty is a 3-year limited term.

On PlayStation, the rules are clear. The data sheet states that the drive plays and stores PS4 games and archives PS5 games, which means PS5 titles sit on the drive until they move back to the console’s internal storage to run. That is a platform rule, not a flaw in the drive, and the P10 makes the archive job painless by holding a whole library at once. A player with a large PS4 back catalogue will get the most from it.

Pros: capacities up to 6TB, room for up to 150 games, a portable form factor, and a 3-year limited warranty.

Cons: read speed up to 130 MB/s is far slower than the SSDs here, the larger capacities are thicker at 0.91 in, and PS5 games cannot run from the drive.

Buy if you own a PlayStation and want the largest library you can carry in one portable drive.

Skip if you want the fastest transfers and are happy with less room.

WD_BLACK P40 Game Drive SSD

The P40 is the fastest drive in this guide. It comes in 500GB, 1TB, and 2TB capacities, with sequential read speeds of 2,000 MB/s on all three and sequential write speeds of 2,000 MB/s on the 1TB and 2TB models. It connects over USB Type-C with a USB 3.2 Gen2x2 interface.

That headline speed needs the right port. Consoles use USB 3.2 Gen 2 ports, so no current console takes full advantage of the Gen2x2 link, and the drive runs at the speed the console port allows. Even at a reduced link speed, transfers stay quick, and the drive still moves games far faster than a hard drive. The RGB lighting is a style touch: the downloadable WD_BLACK Dashboard lets you control the LED lighting, and the maker notes that the dashboard works on Windows only.

The build is compact and tough. The drive measures 106.98 mm long, 50.82 mm wide, and 13.00 mm tall, and it weighs 78.5 g. The maker describes a shock-resistant structure and says the drive can survive a drop of up to two meters. The operating temperature range is 0 degrees C to 85 degrees C, and the non-operating range is minus 40 degrees C to 85 degrees C. The warranty is a 5-year limited term, the longest in this guide.

Console support is broad. The data sheet lists PlayStation 5 for playing and storing PS4 games and archiving PS5 games, Xbox Series X and Series S for playing and storing Xbox One games and archiving Series X and Series S games, PlayStation 4 Pro or PS4 with system software version 4.50 or higher, and Xbox One. It also lists Windows 11, 10, and 8.1 and macOS 10.11 and higher. The pattern is the same on every console: older-generation games run from the drive, and current-generation games rest on it until they move inside.

Pros: read and write speeds up to 2,000 MB/s, a compact and shock-resistant body, RGB lighting control, and a 5-year limited warranty.

Cons: the full speed needs a USB 3.2 Gen2x2 port that consoles do not have, the RGB dashboard works on Windows only, and the 2TB model is the largest capacity on offer.

Buy if you want the fastest transfers in this guide and a drive that looks the part next to a console.

Skip if you need more than 2TB of room or you want a plain drive with no lighting.

WD My Passport for Mac 2TB

The My Passport for Mac 2TB is the drive to pick when a Mac sits next to the console. It is Mac-ready out of the box, and the maker includes a USB-A to USB-C adapter plus a SuperSpeed USB-A cable, so it connects to modern Macs without an extra purchase. The capacity is 2TB, and the maker lists a range that runs up to 6TB.

The drive is slim and light. It measures 107.2 mm long, 75 mm wide, and 13.5 mm tall, and it weighs 139 g. The interface is USB 3.2 Gen 1 over a Micro-B connector, with a transfer rate up to 5 Gb/s, and it stays compatible with USB 3.0 and USB 2.0. The maker lists an operating temperature range of 5 degrees C to 35 degrees C and a non-operating range of minus 20 degrees C to 65 degrees C. The warranty is a 3-year limited term.

Security is built in. The drive offers password protection with built-in 256-bit AES hardware encryption, and the maker bundles Acronis True Image for Western Digital software for scheduled backups. The enclosure uses more than 50 percent post-consumer recycled plastic, and the packaging uses more than 50 percent post-consumer recycled pulp. The drive works with macOS 11 and higher, and a downloadable HFS+ driver lets it read and write on Windows 10 and higher without a reformat.

For console use, this drive is a general-purpose USB drive rather than a console-certified one, so the console formats it for its own storage and the usual platform rules apply: older-generation games run from it, and current-generation games only rest on it. Its strength is flexibility. One drive can hold a game library and also back up a Mac, which suits a home where the console and the computer share a shelf. The Micro-B connector is the main drawback, since it is an older plug than USB-C.

Pros: Mac-ready out of the box with a USB-C adapter in the box, 2TB of room, 256-bit AES hardware encryption, and a 3-year limited warranty.

Cons: the Micro-B connector is an older plug, the maker publishes no sustained read speed, and console use needs a reformat that wipes the drive.

Buy if you own a Mac and a console and want one drive that serves both.

Skip if you want a console-certified drive or a USB-C port on the drive itself.

WD My Passport 2TB

The standard My Passport 2TB is the plain workhorse of this guide. It is a portable hard drive with 2TB of capacity, a USB 3.2 Gen 1 interface, and a 3-year limited warranty. The model number is WDBYVG0020BBK-WESN, and the drive measures 4.22 in long, 2.95 in wide, and 0.75 in tall. It is the simplest drive here, and that simplicity is the point.

The maker describes a slim design that fits in the palm of a hand, and the drive draws its power from the USB cable, so there is no mains adapter to find a socket for. The box holds the portable hard drive, a SuperSpeed USB cable, WD Discovery software, and a quick install guide. The maker lists compatibility with Windows 10 or Windows 8.1 and notes that other operating systems need a reformat.

Security features match the for-Mac version. The drive offers password protection and built-in 256-bit AES hardware encryption, set up through WD Discovery software, and it ships with WD Backup software that can run backups on a schedule. The maker does not publish a sustained read or write speed for this drive, so the article states the interface only: USB 3.2 Gen 1. Expect hard-drive transfer times rather than SSD times.

On a console, this drive behaves like any other USB hard drive. A PS4 or an Xbox One can store games on it and run older-generation games from it after formatting. A PS5 or an Xbox Series X or Series S can use it as an archive for current-generation games, moving them back to internal storage before they run. It is a good fit for a player who wants a lot of room, a familiar brand, and no extra features to learn.

Pros: 2TB of room in a slim body, 256-bit AES hardware encryption with password protection, backup software in the box, and a 3-year limited warranty.

Cons: the maker publishes no sustained read speed, it is slower than the SSDs in this guide, and console use needs a reformat that wipes the drive.

Buy if you want a simple, roomy drive for a large game library and everyday backups.

Skip if you want top transfer speed or a drive built for gaming.

Buying guide

Buying an external drive for a console is mostly about matching the drive to the console and to the games. The five points below cover the choices that matter: HDD or SSD, capacity, the current-generation storage rule, ports and formatting, and moving games back and forth. Get those right and the drive will do its job for years.

External hard drives for consoles: HDD or SSD

The first choice is between a hard drive and a solid state drive, and it comes down to room against speed. A hard drive such as the WD_BLACK P10 holds far more games than an SSD of the same size, and the P10 reaches 6TB. An SSD such as the P40 moves files much faster, with read speeds up to 2,000 MB/s against up to 130 MB/s for the P10.

Think about how the drive will be used. If the drive mostly holds a large library that changes slowly, a hard drive is the sensible pick, because capacity matters more than transfer speed. If the drive moves games often, or travels between homes, an SSD earns its place: shorter waits on every transfer and no spinning parts to worry about on the road. Either type works on a PS4 or an Xbox One for playing older games, and either type works as an archive on a PS5 or an Xbox Series X or Series S.

Capacity: how much room a game library needs

Capacity is the figure that decides how often you delete games. The P10 data sheet bases its game count on a 36 GB average game size, which puts its 6TB model at up to 150 games. A 2TB drive holds a solid library of several dozen large titles, while a 1TB drive suits a player who keeps only a handful of games installed at once.

Count the games you actually play before you buy. A player who rotates through five or six titles will be happy with 1TB or 2TB, while a player who keeps a whole back catalogue will want 4TB or more. Remember that game updates and add-ons grow over time, so a drive that feels roomy on day one can fill up within a year. When in doubt, pick the larger capacity: storage needs only grow, and moving a library to a bigger drive later is a chore.

The PS5 and Xbox Series X and S storage rule

The key rule is simple: current-generation games cannot run from a USB drive. On a PS5, PS5 games can be stored on USB and moved back to play, while PS4 games play directly from the drive. On an Xbox Series X or Series S, Series X and Series S games can only be archived on a USB drive, while Xbox One games play directly from it.

This rule comes from the consoles, not from the drives, and it applies to every USB drive on the market. The fix for playing current-generation games from external storage is an internal expansion: a compatible internal M.2 drive on PS5, or an officially supported expansion card on Xbox. A USB drive is still worth owning, because it holds the games you are not playing right now and saves you from downloading them again. The P40 data sheet states this split plainly for both console families, and the P10 data sheet states it for PlayStation.

Ports, cables, and formatting

Every drive here is bus-powered, so one USB cable carries power and data. Check the connector before you buy: the SSDs use USB-C, the P10 uses a USB Type-A to Micro-B cable, and the My Passport drives use a Micro-B connector with a SuperSpeed USB-A cable. The My Passport for Mac also includes a USB-A to USB-C adapter.

Formatting is the step most buyers forget. A console formats an external drive for its own use, and that format wipes anything already on the drive, so move your files off first. On Xbox, the console guides you through formatting in Settings, under System and then Storage. On PlayStation, the console formats the drive when you set it up as extended storage. A drive formatted for one console will not work on another device without a fresh format, so keep one drive per job.

Moving games between the drive and the console

With an external console drive, the daily routine is moving games, not playing from them. When a game you want is on the archive drive, copy it back to internal storage. The speed of that copy depends on the drive and the port: an SSD finishes sooner than a hard drive such as the P10, and a USB 3.2 Gen 2 port moves data faster than a USB 2.0 port.

Plan moves ahead of play time rather than at the last minute. A large game can take a while to copy even on a fast drive, so start the transfer before dinner and play after. Keep the games you play most on internal storage, keep the rest on the external drive, and rotate as your habits change. That routine keeps the console ready and the library intact without constant downloads.

FAQ

These are the questions buyers ask most about external drives for consoles, answered with the platform rules and the published specs of the drives in this guide. USB drives archive current-generation games and run older-generation games, and the best drive is the one that fits your console and your library.

Can the best external hard drives for consoles run PS5 games

No USB drive can run PS5 games directly. The PS5 requires PS5 titles to sit on its internal SSD or on a compatible internal M.2 drive to launch, and a USB drive can only store PS5 games and move them back to play. That rule applies to every USB drive, because the console needs the speed of its internal storage for current-generation games.

That does not make a USB drive useless on a PS5. The drive holds the games you are not playing, so you can delete a title from internal storage without losing it and copy it back later instead of downloading it again. The T7 Shield and the P40 make that copy quick, and the P10 holds up to 150 games at once. PS4 games are the exception: they install to a USB drive and play directly from it.

Do external drives work with Xbox Series X and Series S

Yes, external USB drives work with Xbox Series X and Series S, with the same split as PlayStation. Xbox One games play directly from the drive, while Xbox Series X and Series S games can only be archived on it and must move to internal storage or an officially supported expansion card before they run.

To use a drive with Xbox, it must have a capacity of at least 128 GB and use a USB 3.0 or higher connection. Every drive in this guide clears both bars. Plug the drive into a USB port, let the console format it, and it becomes extended storage. The console then lets you choose where new games install and move games between internal and external storage from the storage settings.

Can I play PS4 games from an external drive

Yes. PS4 games install to an external USB drive and play directly from it, and the same holds for Xbox One games on Xbox consoles. That is why a roomy hard drive such as the P10 or a My Passport is such a good fit for a PS4 or an Xbox One: the console uses the drive as extra storage, and the games run from it without a move.

The PS4 needs system software version 4.50 or higher to use extended storage, which the P10 and P40 data sheets both list. Once the drive is formatted as extended storage, new games can install straight to it, and existing games can move over in the storage settings. The drive stays tied to that console until you format it again, so plan on one drive per console.

Will an external drive slow down loading

Loading speed depends on the drive type and the game. A hard drive such as the P10 reads at up to 130 MB/s, which is slower than the internal storage of a current console, so games stored on it can load more slowly. An SSD such as the P40 reads far faster, at up to 2,000 MB/s, so transfers and loads from that drive feel much quicker.

For older-generation games played from a USB drive, the difference is modest in practice: the game was built for a hard drive era, and a modern portable drive keeps up with it. For current-generation games, the question does not arise, because those games run from internal storage only. The practical rule is simple: put the games you play most on internal storage, and let the external drive hold the rest.

Do I need to format a new drive for a console

Yes, a console formats a new drive before it can use it as game storage, and formatting wipes the drive. Back up anything on the drive first, then plug it in and follow the console prompts. On a PS5 or PS4, the console sets the drive up as extended storage. On an Xbox, you format it in Settings, under System and then Storage.

After formatting, the drive works only with that console family until you format it again. A drive formatted for a PlayStation will not show your games on an Xbox, and a drive formatted for a PC will need a fresh format before a console accepts it. If you also want the drive for computer backups, use a second drive rather than sharing one between the console and the computer.

Conclusion

Pick the drive that fits your console and your library. A PS4 or Xbox One owner should take the roomy P10, a traveler should take the rugged T7 Shield, and a player who wants the fastest moves should take the P40. On a PS5 or a Series X or S, any USB drive is an archive, so buy for room and speed and keep current games inside.

Related guides

Browse all Buying Guides guides →