The PlayStation 4 has no native keyboard and mouse play in most games, so a best gaming keyboard and mouse for PS4 setup needs a bridge. HORI builds a keypad and mouse set made for the console, while adapters translate PC input into controller signals. This guide pairs the keypad sets with four adapters and a combo that plugs into them.

Quick verdict

The HORI TAC Pro Type M2 leads this list because it is the only keypad and mouse set here built for the PlayStation 4, with mechanical keys and a snipe button for shooters. The XIM APEX leads for Smart Translator aim, and the GameSir VX2 AimBox leads for multi-console play. The Redragon S107 plugs into any adapter here.

A PS4 player buys one of two paths: a keypad set built for the console, or an adapter that translates PC input. The keypad path is simpler, since the set plugs in and plays, while the adapter path covers more consoles and more games. The six picks below cover both paths, plus one combo that feeds any adapter.

Product Type Best for Key spec Main limit
HORI TAC Pro Type M2 Keypad and mouse set PS4 shooters Mechanical keys, snipe button, touch pad PS4, PS3, and PC only, no PS5
HORI TAC Mechanical Keypad SPF-030 Keypad only PS5-ready PS4 play 6 profiles, 135 by 225 by 56 mm, 3.0 m cable Mouse not included
GameSir VX2 AimBox Console adapter Multi-console play 3 reversible USB 2.0 ports, 3.5mm audio jack Needs a controller connected for setup
IOGEAR KeyMander 2 Console adapter Tuning and profiles K2 app, deadzone tuning, game profiles PS5 support needs BeLoader Pro or Remote Play
XIM APEX Console adapter Precise aim Smart Translator, wireless app config PS4 and older consoles only, no PS5
Redragon S107 Wired combo Plug-in set Mouse up to 5000 DPI by button, 10000 DPI by software Wired only, top DPI needs software

The table shows a clear split. Keypad sets keep the setup close to the console, while adapters trade a little setup for a wider reach. Pick the keypad path for the simplest PS4 buy, and the adapter path when the shelf holds more than one console.

How we selected the best gaming keyboard and mouse for PS4

Selection started from published specs, with PlayStation support checked on the manual or maker page and both halves of each combo checked for their own specs. A product made the list only when the published specs stated its key facts, so nothing here rests on a guess.

Each keypad set had to list the PlayStation 4 in its own manual, and each adapter had to list the PlayStation 4 on its maker or support page. Each combo had to state specs for the keyboard and for the mouse, so no set here rests on a guess about one half. The six picks cover keypad sets, adapters, and a plug-in combo.

The maker states the specs in each section below, and where a maker does not state a fact, this guide says so or leaves it out. Limits sit next to strengths in every section, so a buyer can see the trade off before choosing.

Six picks for PlayStation 4 play

These six picks cover the two ways to play with a keyboard and mouse on the PlayStation 4: two HORI keypad sets built for the console, three adapters that translate PC input, and one combo that plugs into an adapter. Each pick below names its specs, its fit, and its limits.

HORI TAC Pro Type M2

The HORI TAC Pro Type M2 is the only keypad and mouse set in this guide built for the PlayStation 4, and it is the first pick for a PS4 shooter player. It pairs a mechanical keypad with a gaming mouse, and it suits a player who wants PC-style control without an adapter in the chain.

The manual describes the set as designed for first-person shooter games, with PC-style control on PlayStation 4, PlayStation 3, and PC. The keypad brings mechanical keys with LED backlighting, an adjustable palm rest, an analog thumb stick that can act as WASD keys, a touch pad, and a headset input. Special buttons cover the shooter basics: the snipe button cuts mouse sensitivity while held, the quick button raises it for fast turns, ADS lock holds aim down sights, and the walk button slows movement.

The mouse adjusts DPI on the fly and carries two programmable buttons on its side, with an ergonomic shape for varied hand sizes. The HORI Device Manager app on iOS and Android pairs over Bluetooth and handles key remapping, sensitivity, acceleration, dead zone settings, profiles, and firmware updates. A platform switch sets PS4, PS3, or PC mode, and the package measures 12 by 7.5 by 3.56 inches with an item weight of 1.91 pounds.

Pros

  • Keypad and mouse in one set built for PS4
  • Snipe, quick, ADS lock, and walk buttons for shooters
  • Analog stick for movement plus a touch pad
  • App control for remapping, sensitivity, and dead zone

Cons

  • PS4, PS3, and PC only, no PS5 support
  • Mouse DPI ceiling not stated on the manual page
  • Wired only

Buy it if you play shooters on the PS4 and want a keypad and mouse set made for the console. Skip it if you plan to move to the PS5, because this set does not list PS5 support.

HORI TAC Mechanical Keypad SPF-030

The HORI TAC Mechanical Keypad SPF-030 is the forward-looking keypad in this guide, built for the PlayStation 5 and the PlayStation 4 alike. It suits a PS4 player who plans to move to a PS5 later, since one keypad covers both consoles. That dual cover makes it the only keypad here with a path to the next console.

Compatibility lists PlayStation 5 consoles, PlayStation 4 consoles, and PC, with Windows 11 and 10 as the supported PC systems. The mouse is not included: a wired USB Type-A mouse or a wireless dongle mouse connects to the USB port on the keypad, while Bluetooth wireless mice cannot connect directly. The keypad works only with keyboard-and-mouse-enabled titles, and the FN key switches between the Home Screen layer and the Keyboard Function layer.

The HORI Device Manager app on iOS 15.4 and above or Android 10 and above pairs over Bluetooth and handles key assignment, stick input on the analog stick, backlight on and off, and up to 6 profiles per console, switched with FN plus a profile key. Mice over 200 mA that are not HID compatible will not work, and mice with more than 5 buttons lose the extra buttons. The keypad measures 135 by 225 by 56 mm, weighs 385 g including the cable, and ships with a 3.0 m cable and a 3.5mm headset jack.

Pros

  • Covers PS5 and PS4 in one keypad
  • Up to 6 profiles per console
  • Adjustable palm rest and headset jack
  • Long 3.0 m cable

Cons

  • Mouse not included
  • Works only in keyboard-and-mouse-enabled titles
  • Mice with more than 5 buttons lose the extra buttons

Buy it if you play on the PS4 now and want a keypad that also works on the PS5. Skip it if you want a mouse in the box, because this keypad ships without one.

GameSir VX2 AimBox

The GameSir VX2 AimBox is the multi-console adapter in this guide, listing the PlayStation 4 alongside Xbox One, Xbox Series X and S, PlayStation 5, and Nintendo Switch. It suits a PS4 player who also owns another console and wants one adapter for the shelf.

The manual describes Agility Translation Technology that provides 1 to 1 gaming accuracy for keyboard and mouse movement on supported consoles. The maker describes the wired link as having no latency, and the GameSir app lets a player adjust keymaps, mouse sensitivity, aim down sight settings, and joystick emulation for each game. Lighting controls sit in the same app.

Three reversible USB 2.0 ports take the keyboard, the mouse, and the controller without a check for plug direction, and a 3.5mm audio jack takes headphones for chat and stereo sound. An internal counterweight and anti-slip silicone feet keep the box still on the desk, and the box ships with a 50 cm Type-C cable and a 50 cm Micro-USB cable. For PS5 games the manual calls for a Sony licensed third-party controller, while backward-compatible PS4 games use an official PS4 controller.

Pros

  • Five console families in one adapter
  • Three reversible USB 2.0 ports for keyboard, mouse, and controller
  • App control for keymaps, sensitivity, and aim down sight settings
  • Audio jack for headsets and an internal counterweight for stability

Cons

  • Needs a controller connected to the adapter port for setup
  • Wired only, so cable routing needs care at the console
  • PlayStation 5 games need a Sony licensed third-party controller

Buy it if you play on the PS4 and another console and want one adapter for both. Skip it if you want a keypad set built for the console, because this adapter translates input instead.

IOGEAR KeyMander 2

The IOGEAR KeyMander 2 is the tuning adapter in this guide, with an app that stores profiles and a deadzone control that shapes how the mouse feels on the PlayStation 4. It suits a PS4 shooter player who likes to adjust first and play second. Its profiles cover the shooters PS4 players load most.

PlayStation 4 and PlayStation 3 support runs direct, with setup that connects the controller to the gamepad port with a micro-USB cable, the keyboard and mouse to their own ports, and the unit to a back USB port on the console. Pairing runs over Bluetooth in the K2 app, where the player sets mouse DPI and loads a game profile. An optional 5V and 2A power supply can feed the unit, and a USB-C Charge and Sync cable ships in the box.

The K2 app holds pre-tuned profiles for Call of Duty, Fortnite, Overwatch 2, and Apex Legends, plus community profiles shared through the app. Deadzone adjustment shapes the small area around the stick center that ignores movement, and the support page calls it strongly recommended for first-person shooters. The support page also warns that some online games may limit emulator use, and that PlayStation 5 support needs BeLoader Pro or Remote Play on a PC.

Pros

  • Deadzone tuning for sharper aim in shooters
  • Pre-tuned profiles for major shooters plus community profiles
  • Separate keyboard, mouse, and gamepad USB ports
  • App on iOS and Android with Bluetooth pairing

Cons

  • PlayStation 5 support needs BeLoader Pro or Remote Play, which adds cost and steps
  • Some online games may limit emulator use, so game terms matter
  • Setup runs through the phone app

Buy it if you play PS4 shooters and want to tune deadzone and sensitivity per game. Skip it if you want native PS5 play, because this adapter needs extra gear for PS5 games.

XIM APEX

The XIM APEX is the precision adapter in this guide, built on Smart Translator technology that maps mouse movement to aim with 1 to 1 precision. It suits a PS4 player who wants the most direct mouse feel the adapter class offers. Its phone app keeps setup off the console and in the hand.

The official app page lists Xbox One, PlayStation 4, Xbox 360, and PlayStation 3 as the supported consoles, with no PlayStation 5 or Switch listed. Smart Translator technology gives 1 to 1 aiming precision that performs the same in every game, and setup runs through the wireless smartphone configuration tool. The adapter suits desk play and couch play alike, since the phone app handles the settings.

The XIM APEX Manager app on iOS and Android is the configuration companion for the adapter, and firmware upgrades keep the unit current. The app page notes that the adapter works with XIM APEX firmware 20180402 and later, and it points players to the XIM site for the latest firmware.

Pros

  • Smart Translator aim mapping with 1 to 1 precision
  • Wireless setup through the phone app
  • Firmware upgradable
  • Works across PS4, PS3, Xbox One, and Xbox 360

Cons

  • No PS5 support
  • No Switch support
  • Tuning runs through the phone app

Buy it if you play PS4 shooters and want Smart Translator aim with phone setup. Skip it if you own a PS5 or a Switch, because the app page lists neither.

Redragon S107

The Redragon S107 is the plug-in combo in this guide, pairing a full size RGB keyboard with a gaming mouse that reaches up to 10000 DPI through software. It plugs into any adapter here, and it suits a PS4 player who wants a strong mouse in the set. No other combo here reaches that DPI ceiling.

The keyboard offers 6 RGB lighting modes, 12 multimedia function keys reached with FN plus the F keys, 25-key anti-ghosting, and a Windows key lock with FN plus Win. Foldable stands set the typing angle, a skin-friendly coating covers the board, and floating keycaps keep the look clean. The set is plug and play, with no drivers needed for basic use.

The mouse steps to 5000 DPI with a dedicated button and to 10000 DPI through the Redragon software, with polling up to 1000 Hz and 7 programmable buttons. Eight RGB lighting effects run on the mouse, and the software handles DPI levels, polling rate, lighting, and button programming. The set weighs 2.05 pounds, and the maker gives a 36-month warranty.

Pros

  • Mouse up to 10000 DPI through software with 1000 Hz polling
  • 7 programmable buttons
  • 25-key anti-ghosting and Windows key lock
  • 36-month warranty

Cons

  • Wired only
  • Top DPI needs the software
  • Keyboard switch type not stated on the manual page

Buy it if you want a combo with a strong mouse for PS4 play through an adapter. Skip it if you want wireless play or a stated switch type, because this set is wired and the manual does not name the switches.

Buying guide

A PlayStation 4 keyboard and mouse buy comes down to three choices: a keypad set built for the console, a universal adapter, or a combo that plugs into an adapter. Get those three right and the rest is tuning, from DPI steps to deadzone settings. The points below walk through each choice in order.

Wired setup for the best gaming keyboard and mouse for PS4

Start with the console USB ports, because every option here is wired. A keypad set plugs straight into the PS4, while an adapter plugs into a back USB port and takes the keyboard, the mouse, and a controller in its own ports. That wiring keeps input lag low and setup simple.

The HORI TAC Mechanical Keypad SPF-030 adds one step: press the PS button on a DualSense or DualShock 4 controller to turn on the console and log in, then press the PS button on the keypad to sign in with it. That login flow is part of the manual, so a buyer should expect it on first setup.

Keypad set or universal adapter

A keypad set built for the PlayStation 4 plugs in and plays with no translation layer, while a universal adapter translates PC input into controller signals. The keypad path is simpler, and the adapter path covers more consoles and more games. The choice comes down to one console or a shelf of them.

The HORI sets are PlayStation focused, with the TAC Pro Type M2 on PS4, PS3, and PC, and the SPF-030 on PS5, PS4, and PC. The adapters cover Xbox consoles too, so a player with two consoles gets more from one adapter than from one keypad set.

Mouse DPI and deadzone tuning on PS4

Console aim runs through a controller stick curve, so raw DPI matters less than how the device maps mouse movement. Start with a middle DPI step, set in-game sensitivity high, then tune the deadzone until small mouse moves feel steady. That order keeps aim smooth instead of jumpy.

The three adapters each give a tuning path: the KeyMander app tunes the deadzone, the HORI app tunes sensitivity and dead zone, and the XIM APEX maps aim through Smart Translator. The Redragon S107 gives the DPI steps to feed them, from 5000 by button to 10000 by software.

Keypad only or full keyboard and mouse

A keypad keeps the left hand in one place with an analog stick for movement, while a full keyboard gives a number pad, media keys, and room for chat binds. Shooters favor the keypad, and games with many binds favor the full board. Desk space decides the rest, since a full board needs room.

The HORI TAC Mechanical Keypad SPF-030 ships without a mouse, so its buyer must add one, while the HORI TAC Pro Type M2 ships with a mouse in the box. The Redragon S107 is a full board with a mouse, which suits a player who wants both halves in one buy.

Game support and online rules

Some online games treat input adapters as emulators and may limit or bar their use, so read the game terms before taking an adapter into ranked play. The IOGEAR support page states this plainly and tells players to check the terms of each game. That check takes a minute and avoids a ban.

Keypad sets built for the PlayStation 4 face fewer questions than adapters, since they are made for the console. Macros add the same question on any device, so keep macro use to casual play unless the game terms allow it.

FAQ

These five questions cover the points PS4 players ask most before buying a keypad set or an adapter. Each answer sticks to what the maker and manual pages state, with no guess about a game or a model that lacks published specs, so a buyer can weigh each answer on published facts alone.

Does the best gaming keyboard and mouse for PS4 work with PS5 games?

It depends on the pick. The HORI TAC Mechanical Keypad SPF-030 lists the PlayStation 5, while the HORI TAC Pro Type M2 and the XIM APEX list only older consoles. The GameSir VX2 and the IOGEAR KeyMander 2 cover PS5 games only with extra gear or steps.

For PS5 games, the GameSir VX2 manual calls for a Sony licensed third-party controller, and the IOGEAR support page calls for BeLoader Pro or Remote Play on a PC. A buyer who wants PS5 play with no extra gear should pick the SPF-030.

Do I need a controller connected to the adapter?

Yes, for the adapters in this guide. The GameSir VX2 and the IOGEAR KeyMander 2 both take a controller in a dedicated gamepad port, and the controller authenticates the adapter to the console. Keep the controller wired to the adapter port during play, since the adapter uses it to speak to the console.

The HORI keypad sets do not need a controller in the loop for play, though the SPF-030 manual uses the DualSense or DualShock 4 PS button for login. That login step is part of setup, not a controller that stays connected during play.

Can I use a wireless mouse with these adapters?

It depends on the adapter and the mouse. A wireless mouse with its own USB receiver can plug into an adapter port, while a Bluetooth-only mouse needs a direct link the adapters here do not offer. A receiver-based mouse is the plain pick, while a Bluetooth-only mouse needs a different path.

The HORI SPF-030 manual states that Bluetooth wireless mice cannot connect directly to the keypad, while a wireless mouse with a USB dongle can. Check the manual for the exact mouse type before buying a wireless set.

Which mouse DPI works well on PS4?

A middle DPI step works well for most PS4 shooters, with in-game sensitivity set high and the adapter or app tuning the rest. The Redragon S107 steps to 5000 DPI by button and 10000 DPI by software, which covers the full range a PS4 player needs. Start there and adjust by feel, not by the number alone.

High DPI alone does not fix aim on a console, since the stick curve caps turn speed. Tune the deadzone and the sensitivity first, then pick the DPI step that feels steady for small moves and fast flicks alike.

What should I buy first for PS4 keyboard and mouse play?

Buy the keypad set or the adapter first, because it decides how the keyboard and mouse connect. The HORI TAC Pro Type M2 is the simplest first buy, since the mouse ships in the box, while an adapter first buy leaves the combo choice open. Either first buy keeps the combo choice open for later.

That order also keeps the spend in steps: one keypad set or adapter now, one combo now or later, with no part wasted if the first combo does not suit the hand. The three adapters here all take the Redragon S107, so the pairing stays open.

Conclusion

The HORI TAC Pro Type M2 is the first buy for most PS4 players, with the XIM APEX close behind for Smart Translator aim and the GameSir VX2 AimBox for multi-console play. The HORI TAC Mechanical Keypad SPF-030 is the pick for a player moving to the PS5, and the Redragon S107 is the combo that plugs into any adapter here.

Buy the keypad set or the adapter first, then the combo that fits the games on the shelf. That order keeps the setup simple and leaves room to tune later.

Related guides

Browse all Buying Guides guides →