A built-in projector speaker can fill a room, but a home theater needs sound that reaches each seat. The best home theater projectors with audio output send sound to a soundbar, a receiver, or powered speakers through HDMI ARC, eARC, optical, or a 3.5 mm jack. This guide compares six verified models, so you can match the connection to your room.

Quick verdict

If you want one answer fast, pick the connection first and the projector second. A soundbar owner needs HDMI ARC or eARC, while a powered speaker setup works well with a 3.5 mm jack or an optical output. The six models below cover every common option, from a simple analog jack to full eARC with Dolby Atmos passthrough.

The Epson Home Cinema 2350 is the simplest pick for a first soundbar, because it pairs HDMI ARC with a 3.5 mm jack and Bluetooth audio. The BenQ X3100i is the most complete pick for a surround setup, because it lists eARC, S/PDIF optical, and a 3.5 mm output in one spec sheet. The BenQ TK710STi suits a small room where the projector sits close to the screen, while the Hisense C2 Ultra suits a room where the projector moves between spots. The Formovie Theater Premium fits a wall-hugging laser TV layout, and the ViewSonic PX701-4K fits a buyer who wants 4K and a wired analog output at a lower tier.

No single output fits every room. HDMI eARC carries the most channels and the richest formats, optical handles multichannel sound over a single cable, and a 3.5 mm jack covers stereo speakers and headphones with the least fuss. Read the table below, note which output your sound gear accepts, then read the matching projector section for the limits that apply to that connection.

Product Type Audio outputs Best for Main limit
Epson Home Cinema 2350 Lamp, long throw HDMI ARC, 3.5 mm, Bluetooth Simple soundbar setup Bluetooth audio works only with Android TV content
BenQ X3100i 4LED, long throw HDMI eARC, S/PDIF, 3.5 mm Full surround setup Analog jack carries stereo only
BenQ TK710STi Laser, short throw HDMI eARC, 3.5 mm Small rooms and gaming Built-in speaker is a single 5 W unit
Hisense C2 Ultra Triple laser, mini HDMI eARC, S/PDIF Flexible placement No 3.5 mm jack in the listed specs
Formovie Theater Premium Triple laser, ultra short throw HDMI eARC, S/PDIF, line out Wall-hugging laser TV setup Analog line out is stereo only
ViewSonic PX701-4K Lamp, long throw 3.5 mm Low-cost wired audio No optical output and no HDMI ARC listed

How we selected these home theater projectors with audio output

Every model in this guide earned its place through a published spec sheet that names at least one audio output. Only models with a named output, a 4K image, and a current listing made the cut. Models with no named output, or with a listing that showed out of stock, were left out.

The audio output was the first filter. A projector qualified only when its own page listed HDMI ARC, HDMI eARC, an optical S/PDIF output, a 3.5 mm audio output, a line out, or Bluetooth audio out by name. A vague claim about good sound was not enough. The output had to appear in the interfaces list or the audio section of the page, so a buyer can confirm it before ordering.

The second filter was the picture. Each model lists a 4K on-screen resolution of 3840 x 2160, so the image holds up on a large screen. Brightness figures differ across the group, from 2200 ISO lumens to 3300 ANSI lumens, and each section states the figure the maker lists. Light sources also differ: two models use a lamp, one uses 4LED, and three use a laser source, which gives buyers a real choice in running costs and upkeep.

The third filter was room fit. The group covers long throw, short throw, and ultra short throw designs, plus a compact mini projector with a gimbal stand. Throw ratio, screen size range, and placement notes come from the maker pages. A buyer with a deep room, a buyer with a shallow room, and a buyer who wants the projector inches from the wall can each find a match here.

Figures in this guide come only from the published maker pages. Where a page states a limit, such as Bluetooth audio that works only with one source, the limit is stated in the product section. Where a page does not state a figure, this guide does not invent one.

The projectors

The six projectors below span lamp, LED, and laser light sources, plus long throw, short throw, and ultra short throw designs. Each section names the audio outputs the maker lists, the picture specs that shape the image, and the limits that matter when you connect external sound.

Epson Home Cinema 2350: lamp brightness and a simple soundbar hookup

The Epson Home Cinema 2350 suits a buyer who wants a simple route to a soundbar. The maker lists HDMI ARC on one port plus a 3.5 mm stereo audio out, so a soundbar can connect through a digital or an analog route. A 10 W bass-reflex speaker covers casual viewing, while Bluetooth audio support adds a wireless option for soundbars or headphones.

The picture rests on 3-chip 3LCD technology with 4K PRO-UHD resolution of 3840 x 2160. The maker lists 2,800 lumens of color brightness and 2,800 lumens of white brightness, which helps the image hold up in a room that is not fully dark. HDR10 and HLG support are listed, and an Android TV streaming player comes included, so streaming apps run without a separate stick.

The audio options carry one clear limit. The maker notes that Bluetooth audio is limited to audio played through Android TV, and that the audio function is not available on content connected through the HDMI input. That means a Blu-ray player or console plugged into HDMI cannot send sound over Bluetooth from this projector. For those sources, the HDMI ARC port or the 3.5 mm jack is the right route.

Gamers get input lag times under 20 ms, according to the maker, which keeps controls responsive on a big screen. The compact design and vertical lens shift help the projector sit on a shelf or a table without a fixed mount. Two HDMI ports are listed, with one port used by the Android TV dongle, so plan for one free HDMI input after setup.

  • HDMI ARC plus a 3.5 mm stereo output cover both digital and analog soundbars
  • 2,800 lumens of color and white brightness suit rooms that are not fully dark
  • Bluetooth audio support connects soundbars or headphones without a cable
  • Android TV player included, with HDR10 and HLG support listed
  • Bluetooth audio works only with Android TV content, not with HDMI sources
  • One HDMI port is taken by the Android TV dongle, leaving one free input

Buy if you want the simplest soundbar hookup and a bright lamp projector with streaming built in.

Skip if you plan to send Bluetooth audio from a console or Blu-ray player, since that route is limited to Android TV content on this model.

BenQ X3100i: eARC, optical, and analog outputs in one box

The BenQ X3100i is the most complete audio package in this guide. The maker spec sheet lists a 3.5 mm audio out, HDMI audio return with eARC and Dolby Atmos, and S/PDIF multi-channel RAW output. That trio covers a stereo speaker pair, an optical receiver, and a modern soundbar or AV receiver through a single HDMI cable.

The picture uses 4LED light with 3300 ANSI lumens and 4K UHD resolution of 3840 x 2160. The maker lists 100 percent DCI-P3 coverage and 95 percent Rec. 709 coverage, plus a contrast ratio of 600,000:1 with light source dimming. Two 5 W chamber speakers sit inside the body, and the light source life is listed at 20000 hours in normal mode and 30000 hours in ECO and SmartEco modes.

Gaming is a strong suit here. The maker lists input lag of 4.2 ms at 1080p and 240 Hz, and 16.7 ms at 4K and 60 Hz, which keeps fast games responsive. Two HDMI 2.0b inputs are listed, with HDCP 2.2 support, and an Android TV dongle is included in the box. The throw ratio of 1.15 to 1.50 and 1.3x zoom give useful placement range in a living room or a dedicated movie room.

The main limit is the analog jack, which carries stereo only, so it cannot feed a surround receiver on its own. For surround sound, use the eARC port or the S/PDIF output instead. The projector weighs 6.8 kg, so a ceiling mount needs a bracket rated for that weight, and the 32 dBA typical noise figure is worth noting for quiet scenes in a small room.

  • eARC with Dolby Atmos, S/PDIF optical, and a 3.5 mm jack cover every common sound setup
  • 3300 ANSI lumens and 100 percent DCI-P3 coverage suit bright, colorful movies
  • 4.2 ms input lag at 1080p and 240 Hz suits fast console and PC games
  • 4LED light source life reaches 30000 hours in ECO mode
  • Analog 3.5 mm output is stereo only and cannot carry surround formats
  • At 6.8 kg it needs a solid mount and a firm shelf

Buy if you want one projector that can feed a soundbar, a receiver, and a stereo speaker pair without an adapter.

Skip if you only need a basic stereo output, since the extra audio routes add cost you may never use.

BenQ TK710STi: short throw laser with eARC for tight rooms

The BenQ TK710STi suits a small room where a long throw projector cannot fit. Its throw ratio of 0.69 to 0.83:1 produces a 100-inch diagonal image from just 5.5 feet away, according to the listing page. The audio side lists HDMI eARC for 7.1-channel and Dolby Atmos sound, plus a 3.5 mm mini audio output for stereo gear.

The laser phosphor light source is rated at 3200 ANSI lumens with 4K on-screen resolution of 3840 x 2160. The maker lists HDR10 and Hybrid Log Gamma support, plus 95 percent coverage of the Rec. 709 color space. Expected light source life is 20000 hours, so lamp swaps are not part of the routine. A single 5 W speaker is built in, which covers casual use but is not a match for a dedicated sound system.

Gaming figures are strong. The listing page notes 4.2 ms input lag with 1080p at 240 Hz, 8.3 ms at 1080p and 120 Hz, and 16.7 ms at 4K and 60 Hz. Two HDMI 2.0b inputs are listed, and the included QS02 streaming dongle provides Android TV with Wi-Fi and Bluetooth. Keystone correction of plus or minus 30 degrees on both axes helps square the image when the projector sits off center.

The main limit is the built-in sound, which is a single 5 W speaker, so an external sound setup is close to a must for movie nights. The short throw design also means the projector sits near the screen, so the audio cable run to a soundbar or receiver needs planning. The eARC port handles that job well when the soundbar sits near the screen.

  • Short throw design fills a 100-inch screen from 5.5 feet away
  • HDMI eARC carries 7.1-channel and Dolby Atmos sound to a soundbar or receiver
  • Laser light source rated at 3200 ANSI lumens with 20000 hours of life
  • Low input lag suits console gaming on a big screen
  • Single 5 W speaker is modest for movie sound
  • Short throw placement puts the projector close to the screen, so cable runs need planning

Buy if your room is shallow and you want a laser projector with eARC for a soundbar.

Skip if you have a deep room and a long throw layout, since the short throw lens is built for close placement.

Hisense C2 Ultra: triple laser mini with eARC and optical out

The Hisense C2 Ultra is the flexible pick. It is a triple laser mini projector on a gimbal stand that turns 360 degrees and tilts 135 degrees, so it can aim at a wall, a screen, or a ceiling. Its audio outputs are HDMI eARC on the HDMI 2.1 port and an S/PDIF optical output, which feed a soundbar, a receiver, or a digital speaker setup.

The picture lists 3000 lumens of brightness with 4K Ultra HD resolution of 3840 x 2160. TriChroma triple laser color is listed with Dolby Vision, HDR10+, HDR, and HLG support, plus IMAX Enhanced. The projection size runs from 65 inches to 300 inches, and the 1.67x optical zoom with a throw ratio of 0.9 to 1.5:1 gives placement range without moving the stand.

Built-in sound is stronger than on most projectors here. The listing page describes a JBL sound system with two 10 W speakers plus a 20 W subwoofer built into the stand, with DTS Virtual:X and DTS HD support. That setup covers everyday viewing on its own, while the eARC and optical outputs take over when a full sound system is wanted. Bluetooth 5.3 and WiFi 6E are listed for wireless audio and streaming.

The main limit is the analog side: the spec table lists S/PDIF as the audio output, with no 3.5 mm jack in the listed specs. A buyer with only analog powered speakers needs an adapter or a different connection. The unit also relies on its gimbal stand for aiming, so a fixed ceiling mount setup needs more thought than a tabletop spot.

  • HDMI eARC and S/PDIF optical outputs feed soundbars and receivers
  • Gimbal stand turns 360 degrees and tilts 135 degrees for wall, screen, or ceiling use
  • JBL audio with two 10 W speakers and a 20 W subwoofer covers casual viewing
  • 3000 lumens with Dolby Vision and IMAX Enhanced suit bright, colorful movies
  • No 3.5 mm analog jack appears in the listed specs
  • Gimbal design suits tabletop use more than a fixed ceiling mount

Buy if you want a portable-feeling laser projector with strong built-in sound plus eARC and optical outputs.

Skip if your speakers accept only a 3.5 mm analog plug, since no such jack is listed for this model.

Formovie Theater Premium: ultra short throw laser TV with three outputs

The Formovie Theater Premium is built for a room where the projector sits right against the wall. Its throw ratio of 0.21:1 projects up to a 150-inch screen from only 28 cm away. The audio panel lists one HDMI 2.1 port with eARC, one S/PDIF optical output, and one analog line out, so three different sound setups can connect.

The ALPD RGB+ 4.0 triple laser light source is rated at 2200 ISO lumens with 4K standard resolution and a color gamut above 100 percent BT.2020. Dolby Vision, HDR10+, and HDR10 are listed, with a typical contrast ratio of 3000:1. The screen size range is 80 to 150 inches, and motorized focus with 8-point and 4-point keystone correction helps square the image on a fixed screen.

Built-in sound comes from second-generation Bowers and Wilkins speakers rated at 2 x 15 W, with Dolby Atmos and DTS-X support listed. Noise is listed at 28 dB or less, which keeps fan sound low during quiet scenes. Google TV is built in, with WiFi 6 and Bluetooth 5.0 listed, and input lag under 18 ms is listed for gaming with ALLM support.

The main limit is the analog line out, which is stereo only, so it cannot carry surround formats to a receiver on its own. For surround sound, the eARC port or the optical output is the right choice. The projector weighs 9.8 kg and measures 550 x 349.2 x 107.5 mm, so the media console under the screen needs to be solid and level.

  • Three audio outputs: HDMI eARC, S/PDIF optical, and analog line out
  • Ultra short throw design fills up to 150 inches from 28 cm away
  • Bowers and Wilkins speakers rated at 2 x 15 W with Dolby Atmos support
  • 2200 ISO lumens with Dolby Vision and a 3000:1 typical contrast ratio
  • Analog line out is stereo only and cannot carry surround formats
  • At 9.8 kg it needs a sturdy, level console close to the screen

Buy if you want a laser TV that sits against the wall and feeds a soundbar, a receiver, or stereo speakers.

Skip if your room layout puts the screen far from the media console, since ultra short throw needs close placement.

ViewSonic PX701-4K: a low-cost 4K projector with a 3.5 mm jack

The ViewSonic PX701-4K is the plain wired pick in this guide. It lists a single audio output, a 3.5 mm jack, which connects directly to powered speakers, a soundbar with an analog input, or headphones. There is no optical output and no HDMI ARC in the listed specs, so the analog jack is the whole external audio story here.

The picture is 4K with on-screen resolution of 3840 x 2160, driven by a 0.47-inch DLP chip with pixel shifting. Brightness is listed at 3200 ANSI lumens, with a contrast ratio of 12000:1 in SuperEco mode. The 203 W UHP lamp is listed at 6000 hours in normal mode and 20000 hours in SuperEco mode, and the image size runs from 30 inches to 300 inches.

The built-in speaker is a single 10 W unit, which covers casual viewing in a small room. Two HDMI 2.0 inputs are listed, with HDCP 1.4 and 2.2 support, and input lag of 4.2 ms is listed for fast gaming. The throw ratio of 1.5 to 1.65:1 suits a standard living room, with a 100-inch image from 3.32 m away, and keystone correction of plus or minus 40 degrees on both axes helps with placement.

The main limit is the narrow audio choice. A buyer with a soundbar that accepts only HDMI ARC or optical input will need an adapter or a different projector. The lamp light source also means brightness fades over time and a lamp swap is part of long-term ownership. At 2.8 kg it is the lightest model here, which makes shelf placement and moving it between rooms easy.

  • 3.5 mm audio output connects powered speakers, headphones, or an analog soundbar
  • 3200 ANSI lumens with 4K resolution suit bright living rooms
  • Input lag of 4.2 ms suits fast console and PC games
  • Lightest model in this guide at 2.8 kg, easy to move and place
  • No optical output and no HDMI ARC in the listed specs
  • Lamp light source fades over time and needs a swap after its rated life

Buy if you want 4K, a bright image, and a simple wired analog output without paying for extra audio routes.

Skip if your soundbar or receiver accepts only HDMI ARC or optical input, since this model lists neither.

Buying guide

Choosing a projector by its audio output starts with your sound gear, not with the picture. Note which inputs your soundbar or receiver offers, then match the projector output to that list. The sections below walk through each output type and the setup steps that keep sound and picture in sync.

Checklist for a home theater projector with audio output

Start with a short checklist before you compare models. List the inputs on your soundbar, receiver, or powered speakers, then check each projector spec sheet for a matching output. Confirm 4K resolution, note the brightness figure, and check the throw ratio against your room depth. A model that matches on all four points is a strong pick.

Next, check the limits that do not show in a headline spec. Some projectors limit Bluetooth audio to one source, some analog jacks carry stereo only, and some models list no optical output at all. Read the audio section of the spec sheet, not just the feature bullets, and note any source limits before you order. A five-minute check here avoids a return later.

HDMI ARC and eARC explained in plain terms

HDMI ARC sends sound from the projector back down the same HDMI cable to a soundbar or receiver. HDMI eARC is the newer version, with more bandwidth for multichannel sound and object-based formats such as Dolby Atmos. If your soundbar lists eARC, pair it with a projector that lists eARC, so the link runs at full quality.

ARC works well for a simple soundbar setup, while eARC suits a full surround receiver. Check which HDMI port carries ARC or eARC on the projector, since only one port usually offers it, and the other ports may serve a streaming stick or a console. Use a cable rated for the format you want, and turn on the ARC or eARC setting in both the projector and the sound device menus.

Optical, analog, and Bluetooth outputs compared

An optical S/PDIF output sends digital surround sound over a single thin cable to a receiver that lacks an eARC port. It handles common surround formats, though it cannot carry the top object-based formats that eARC can. A 3.5 mm jack or line out is simpler still and carries stereo sound to powered speakers, headphones, or an analog soundbar input.

Bluetooth audio removes the cable entirely, which suits headphones and a wireless soundbar. The trade is latency, since wireless sound can lag behind the picture, and some projectors limit Bluetooth audio to one source only. For movie nights, a wired output usually gives the most reliable sync, while Bluetooth suits casual viewing and late-night headphone use.

Plan cable runs before you mount the projector

Measure the cable path before you fix the projector in place. A ceiling-mounted projector needs a long HDMI or optical run to the soundbar or receiver, while a shelf-mounted projector may need only a short cable. Ultra short throw models sit near the screen, so the soundbar cable stays short, but the power and HDMI cables still need a tidy route.

Leave slack in every run, and avoid sharp bends in optical cables. If the soundbar sits under the screen and the projector sits at the back of the room, plan the run along a wall or through a cable channel. A tidy run keeps the room looking clean and keeps cables away from feet, pets, and vacuum cleaners.

Built-in speakers versus external sound

Built-in projector speakers range from a single 5 W unit to a 2 x 15 W system with a subwoofer, and the stronger ones cover everyday TV. Even so, a built-in speaker sits behind or beside the screen, while a soundbar can sit under the screen and aim sound at the seats. For movie nights, external sound gives wider staging and deeper bass.

Use the built-in speaker as a backup, not as the main plan, when the room is large or the audience sits far from the screen. Connect the external setup through the best output the projector offers, then set the projector audio output to external in the menu. Keep the built-in speaker as a fallback for quick viewing without powering up the full sound system.

FAQ

These answers cover the questions buyers ask most about projector audio outputs. Each answer rests on the spec details in the product sections above, plus general setup practice for home theater sound. Read them before you buy, since the right output depends on the sound gear you already own.

Do home theater projectors with audio output support surround sound

It depends on the output. HDMI eARC and optical S/PDIF outputs can carry surround sound to a soundbar or receiver, and several models here list eARC with Dolby Atmos support. A 3.5 mm jack or line out carries stereo only, so it cannot feed a surround receiver. Check the output type on the spec sheet, match it to a sound system that accepts it.

Can I use a soundbar with a projector that has only a 3.5 mm jack

Yes, if the soundbar offers an analog input. Run a 3.5 mm cable from the projector audio out to the soundbar analog input and select that input. The sound will be stereo, not surround, but louder and clearer than the projector built-in speaker. If the soundbar accepts only HDMI or optical input, you need a different projector or an adapter.

Does HDMI ARC carry sound from every source

HDMI ARC carries sound from the projector to the sound device, but sources differ. Sound from a built-in app or a dongle plugged into the projector usually travels over ARC. Sound from an external player on a different HDMI port also travels over ARC, though behavior varies by model. Check the manual, and test each source after setup.

Will Bluetooth audio lag behind the picture

Bluetooth audio can lag behind the picture, since wireless adds delay. Some soundbars and headphones offer a low-latency mode, and some projectors offer an audio delay setting. For movies, a wired HDMI, optical, or analog connection gives the tightest sync. Save Bluetooth for headphones and casual viewing, where a small delay is less noticeable.

Do I still need a receiver with an eARC projector

No, a soundbar with an eARC input can replace a receiver in most rooms. Link the projector eARC port to the soundbar eARC port with one HDMI cable, and the soundbar handles decoding. A receiver still suits a multi-speaker surround layout, a turntable, or several wired sources. For a simple two-piece setup, eARC and a soundbar are enough.

Conclusion

Match the audio output to your sound gear, then pick the projector that carries it. The Epson 2350 suits a simple soundbar, the BenQ X3100i suits a full surround setup, and the Formovie Premium suits a wall-hugging laser TV room. Choose the connection first, and great sound will follow the big picture.

Related guides

Browse all Buying Guides guides →