Swapping keycaps on a Corsair K95 RGB Platinum is not as simple as buying any set, because Corsair uses a non-standard bottom row. This guide sorts the best key caps for K95 Platinum WASD keyboards into textured WASD kits, full replacement sets and cautionary options, so you buy the right fit the first time.

Quick verdict on the best key caps for K95 Platinum WASD keyboards

The short answer depends on whether you want to upgrade only the WASD cluster or the entire board. Both paths have a clear winner from Corsair itself, and a few third-party sets that only make sense with careful checking of the bottom row first. Read the fit notes under each pick.

For a textured WASD upgrade, the Corsair FPS/MOBA Pudding Keycap Mod Kit is the most current choice. It is an eight-key set with a frosted two-piece pudding design, a keycap puller and embossed QWERDF and WASD caps, and Corsair says it works with all of its mechanical keyboards. The HUYUN FPS Backlit Key Caps are the plainer alternative, a 10-key set with MOBA and FPS keys and a puller.

For a full replacement, the original Corsair PBT Double-Shot Keycap Kit is the one Corsair’s own support points K95 Platinum owners to, and the maker lists the K95 RGB Platinum as compatible. It does not cover the six macro keys on the left. Third-party sets from Redragon and Glorious are tempting for their looks, but both demand a standard bottom row, which the K95 does not offer.

Quick comparison table

The table below puts the seven sets side by side on type, best use, the one spec that matters most and the main trade-off. Confirm the details on the live listing before you decide. Maker pages can change, so check them again before buying. Treat every spec here as a starting point and verify it before you spend any money.

Set Type Best for Key spec Main trade-off
Corsair FPS/MOBA Pudding Keycap Mod Kit (CH-9911190-NA) 8-key WASD and QWERDF kit RGB owners who want a textured WASD Frosted pudding body with embossed keys K95 is not named on the page
Corsair PBT Double-Shot Keycap Kit (CH-9000234-WW) Full replacement set Refreshing the whole board PBT with translucent legends No macro keys in the set
YMDK double-shot PBT set with Corsair bottom row Third-party full set Pudding look on a full set Corsair K95 listed by the seller Listings vary by option
Redragon A130 Pudding Keycaps 104-key third-party set Pudding look, standard boards Doubleshot PBT, OEM profile Not built for odd bottom rows
Glorious Aura Mechanical Keycaps 104-key third-party set Standard-layout keyboards PBT, Cherry MX stem Needs a standard bottom row
HUYUN FPS Backlit Key Caps 10-key FPS and MOBA kit Plain WASD and QWERDF replacement 10 keys with puller, K95 named on the page Third party, material not stated
BestParts 104pcs Backlit Keycaps 104-key third-party full set Whole-board refresh 104 backlit keys, K95 named in the title Bottom row and material not described

How we selected these key caps

This list is built around one question: which sets can an owner of a Corsair K95 RGB Platinum realistically fit and use, with attention to the WASD cluster first. The criteria below explain what counted, what did not, and how the sources were handled for each set.

What a K95 Platinum owner really needs from a keycap set

Most buyers searching for K95 Platinum keycaps want one of two things: textured, easy-to-find WASD keys, or a full set that changes the look of the whole board. Those goals lead to different products, and the selection reflects both rather than treating all keycaps as interchangeable.

The K95 RGB Platinum page on Corsair’s own site lists a Cherry MX Speed switch on the model we read and includes FPS and MOBA keycap sets with a keycap puller in the box. That matters, because a replacement set only needs to beat what ships with the keyboard, and an MX stem is the baseline that every pick shares.

We also looked for fit statements. A set earned a place when the maker or a retailer states compatibility with Corsair mechanical keyboards, with the K95 line, or with Cherry MX stems. Sets that demand a standard bottom row are included but labeled as limited, since Corsair’s bottom row is non-standard according to the review we read.

What we did not count as evidence

We did not test any of these sets on a keyboard, and we did not count star ratings, review totals or sales rankings. Specs in this guide are manufacturer or retailer claims reported as published, and where a page did not state something, we say so instead of guessing.

Several retailer pages returned errors when opened for this research, so a few specs rest on search-result text rather than a fully opened product page.

Prices and stock were not checked. Some kits may be out of production or sold only through resellers, so availability should be confirmed at publish time and again at the moment you buy.

How the best key caps for K95 Platinum WASD keyboards were ranked

Ranking follows fit confidence first, then how directly the set answers the WASD need. Corsair-made sets with a stated Corsair compatibility claim sit at the top, third-party sets with a seller-stated K95 note come next, and sets that require a standard bottom row come last.

Material and profile are mentioned only where a page states them. Corsair describes PBT as the polymer used for its double-shot caps, while the Redragon and Glorious pages state doubleshot or PBT construction themselves.

The 7 key cap sets in detail

Each entry below covers who the set is for, why it fits a K95 Platinum, the specs the maker or retailer states, and the limits you should know about before ordering. The first three are the strongest matches for a WASD-focused upgrade, and the last three carry the most caveats.

Corsair FPS/MOBA Pudding Keycap Mod Kit (CH-9911190-NA)

This is the set to pick when you want textured WASD keys that also pass RGB light through. It suits K95 Platinum owners who like the look of translucent pudding caps but do not want to replace the entire keyboard’s keycaps. It is also the only pick here that is built for backlit boards.

Corsair’s page names it the FPS/MOBA Pudding Keycap Mod Kit for QWERTY/Z layout in Gunmetal Gray. It is an eight-key set with embossed QWERDF and WASD caps, a keycap puller and a warranty card. The finish is described as electroplated aluminum on a two-piece frosted pudding body, with an embossed triangle pattern.

The maker says it works with all Corsair mechanical and optical-mechanical keyboards, plus other Cherry MX and MV compatible boards, and that the frosted body diffuses RGB lighting. The page does not mention the K95 by name, so the general Corsair claim is the evidence here, and the kit is built for MX-stem keyboards, matching the K95 Platinum’s switches.

Pros: a textured, distinctive WASD cluster, a puller in the box and a design made for backlit boards. Cons: only eight keys, so the rest of the board stays unchanged, and the page does not state the cap material beyond the finish. Buy if you want the most current official WASD upgrade. Skip if you want a full-board refresh.

Corsair PBT Double-Shot Keycap Kit (CH-9000234-WW)

This is the full-replacement choice, and it is the one Corsair points K95 Platinum owners toward. It suits anyone who wants every standard key swapped for a thicker, shine-resistant cap while keeping the factory bottom-row shapes that Corsair designed for its own boards.

Corsair’s compatibility page lists the K95 RGB Platinum XT, K95 RGB Platinum and K95 RGB, alongside the K70, STRAFE, K68, K66, K65 and K63 families. The page says PBT is the polymer used to build the keycaps and that the legends are translucent, so backlighting passes through from the switches.

A 2017 Legit Reviews article describes the full kit as 104 or 105 keys covering US, EU and UK layouts, with a key puller, a two-year warranty, and white or black options. It states that the K95, K95 RGB and K95 RGB Platinum do not receive macro keys from this kit, and that Corsair’s bottom row is non-standard. A Corsair support answer on a retailer page also says the original PBT Double Shot kit is the one to buy for the K95 Platinum.

Pros: maker-listed K95 Platinum compatibility, translucent legends and PBT construction. Cons: no macro keys, a long swap job across the whole board, and a reviewer reported a stiff spacebar after the change. Buy if you want a complete refresh with confidence in fit. Skip if you only need new WASD keys.

YMDK double-shot PBT set with Corsair bottom row

This third-party full set is for K95 owners who want a pudding-style look and are willing to verify the exact listing. It suits buyers who accept that seller descriptions vary, and who will choose only the option that clearly includes the Corsair bottom row and read the listing twice.

Search-result text shows a YMDK 108-key listing with a Corsair bottom row, whose compatibility note lists Strafe, K65, K70 and K95, with a caveat that the K95 has no macro keys in the set. A community thread reports YMDK sells variants with and without Corsair and Razer bottom rows, and other YMDK listings state they will not fit Corsair boards.

Those specs rest on search snippets and a forum thread, not on an opened product page, because the retailer page returned an access error. That makes this the least certain entry, and the double-shot PBT description should be confirmed on the exact listing you buy.

Pros: a full-set pudding look and a seller-stated K95 note. Cons: inconsistent listings between options and no macro keys. Buy if the listing explicitly shows the Corsair bottom row. Skip if the title says standard ISO or ANSI only.

Redragon A130 Pudding Keycaps

This is a translucent set with a strong fit for standard keyboards, and a weak fit for the K95. It suits readers who want to understand the trade-off before choosing a third-party set for their Platinum board, since the look is appealing but the fit is the risk.

Search results for the Redragon A130 describe a 104-key doubleshot PBT set with a translucent layer, an OEM profile, a US ANSI layout and a keycap puller in the box. Retailers say it is built for Cherry MX style mechanical keyboards and that non-standard or non-US layouts are not supported.

Because Corsair’s bottom row is non-standard according to the Legit Reviews article, the long and modifier keys on the bottom row are the likely trouble spots on a K95 Platinum, though that is an inference and not a Redragon statement. These specs also come from search results, as the maker’s page returned a rate-limit error.

Pros: a translucent PBT look and a puller in the box. Cons: the maker’s compatibility language points to standard layouts and the K95 is not named. Buy if you accept using only the alphanumeric keys. Skip if you want every key to fit.

Glorious Aura Mechanical Keycaps

This set is documented clearly on the maker’s page, and the documentation is exactly why it ranks last for this keyboard. It suits owners of standard-layout boards, and it is listed here so K95 buyers can see why a clean spec sheet is not the same as a confirmed fit.

Glorious lists the set as 104 keys in an ANSI-US QWERTY layout, made of PBT plastic, with Cherry MX, Gateron and Kailh stem compatibility and transparent legends for backlight. The page says it is compatible with any mechanical keyboard that has a standard bottom row, and it lists an extra ESC key but no keycap puller.

Corsair’s non-standard bottom row, reported in the Legit Reviews article, conflicts with that requirement, so a K95 Platinum is not a documented fit. The page does not state the profile.

Pros: clear specs, PBT material and backlight-friendly legends. Cons: a standard bottom row is required and no puller is listed. Buy if you plan to use the keys on a different, standard-layout keyboard. Skip if the K95 Platinum is your only board.

HUYUN FPS Backlit Key Caps

The HUYUN FPS Backlit Key Caps are a 10-key third-party kit with FPS and MOBA keys in gray and a keycap puller. They suit K95 Platinum owners who want plain replacement WASD and QWERDF keys with little commitment, and who accept that this is not a Corsair-branded product.

Amazon lists 10 keys, covering MOBA keys Q, W, E, R, D and F and FPS keys W, A, S and D, with a keycap puller. The bullets call the set compatible with all Cherry switch types and 100 percent compatible with Corsair mechanical keyboards that use Cherry or Gateron MX RGB switches, and name the K95 among supported Corsair models with backlighting support. The listing gives 1.76 ounces and does not state the material, the profile or whether the keys are pudding-style.

Pros: a puller included, the K95 named on the page and a small kit that replaces only the keys you use most. Cons: the material and profile are not stated, the Platinum name does not appear, and the maker is a third party.

Buy it if you want a small set of replacement gaming keys with a puller. Skip it if you want a documented material or a full-board refresh.

BestParts 104pcs Backlit Keycaps

The BestParts 104pcs Backlit Keycaps is a full third-party set for Corsair-style mechanical keyboards, with a title that names the K70 LUX, K65 and K95. It suits owners who want a whole-board refresh in black and are prepared to confirm the bottom row and any macro-key fit before swapping every cap.

Amazon lists a set of 104 backlit gaming keycaps in black, with compatibility stated for the K70, K63, K65 and K95 RGB mechanical wireless gaming keyboards. The listing gives 6.7 ounces and a 3 month warranty, and the model number is shown as A Whole Set. The page does not name the material or profile, does not mention the K95 RGB Platinum by name, and does not describe the bottom row or macro keys.

Pros: a full 104-key set in one purchase, backlit keys and the K95 named in the title and bullets. Cons: the material, profile and bottom-row fit are not stated, the Platinum model is not named, and the warranty is three months.

Buy it if you want a full black set and will check the bottom row before swapping. Skip it if you need a documented fit for the K95 RGB Platinum.

Buying guide for best key caps for K95 Platinum WASD keyboards

A little preparation avoids the two most common mistakes: buying a set that does not fit the K95 bottom row, and buying a textured kit that does not suit how you play. The sections below explain what to check before ordering, from bottom-row fit to materials and the swap itself.

Check the bottom row before anything else

The bottom row is where K95 Platinum keycap swaps go wrong. Legit Reviews notes that Corsair’s bottom row is non-standard, so full sets built for a standard layout may leave the space bar, modifiers or Windows key without a matching cap, which is a costly surprise after you have already pulled every key.

Corsair’s own compatibility pages are the safest guide, because they name models. The PBT Double-Shot PRO kit page says it serves keyboards with a standard bottom row and Corsair’s newer models, and a Corsair support answer says the original PBT Double Shot kit is the one for the K95 Platinum.

When a third-party seller lists several options, choose the one that mentions a Corsair bottom row, and ask the seller if the listing is unclear. Never assume that a 104-key or 108-key count means the bottom row will line up.

Understand what a WASD kit changes

FPS and MOBA kits swap a handful of keys, usually WASD for first-person games and QWER with DF for MOBA play. The Corsair pudding kit, for example, includes eight keys that cover WASD and QWERDF, which is the whole point of the category and the reason these kits are so small.

These kits change feel, not function. Texture and contour help your fingers find the home position without looking, and some reviewers report that angled tops take time to get used to for typing. Nothing here makes the keyboard faster or more accurate, and Corsair does not claim that. Think of it as comfort and recognition, not performance, and judge the set on feel and looks.

Because the K95 Platinum ships with FPS and MOBA keycap sets and a puller, you may already own a usable WASD set. A replacement purchase makes sense mainly for a different look, a worn-out key or a lost spare.

Material, legends and backlighting

Material and legend style matter more on a full set than on a WASD kit, because you will see and touch them on every key. Corsair describes PBT as the polymer in its double-shot caps and says the legends are translucent so backlight passes through from the switch.

Pudding-style sets use a translucent layer to diffuse RGB light, and the Corsair pudding kit says its frosted design diffuses lighting. How bright or even the effect looks depends on the board and your lighting profile, which the sources do not quantify.

Cap profile and wall thickness are rarely stated for Corsair kits. Treat any figure that is missing from the maker’s page as unknown rather than assuming a thickness.

Plan for the swap itself

A WASD swap takes only a few minutes with the included puller, and it is easy to undo. A full-board swap is a much longer job, and Legit Reviews notes that changing over more than a hundred keys takes longer than expected and that cleaning residue from new caps may be needed.

Pull keys straight up, keep the stabilizer-equipped keys in mind and work from one side of the board to the other. The same review reports a space bar that began to stick on its outer stabilizers after the swap, so check long keys before sealing the job.

Keep the original caps in a bag. If a new set turns out to leave a gap on the bottom row, you can refit the factory keys and continue using the board.

Frequently asked questions

These answers cover the questions K95 Platinum owners ask most often when shopping for new WASD keys or a full replacement set, and they stick to what the maker pages, retailer pages and review text actually state, with gaps called out instead of guessed.

Do standard Cherry MX keycaps fit the K95 RGB Platinum?

The stem is not the obstacle. The K95 RGB Platinum page we read lists a Cherry MX Speed switch, and several third-party kits are described as fitting Cherry MX stems. Fit problems come from key sizes and the non-standard bottom row, not from the switch.

For a WASD kit, the standard-size alphanumeric keys are the safest part to replace. Corsair’s pudding kit is made for MX-stem keyboards, and the HUYUN FPS kit states compatibility with Corsair mechanical keyboards that use Cherry MX-style switches.

For a full set, a standard Cherry MX stem is necessary but not enough, so confirm that the listing covers Corsair’s bottom row.

Do replacement sets include the six macro keys?

Not according to the sources we read, and that is worth knowing before you buy. Legit Reviews says the K95, K95 RGB and K95 RGB Platinum do not receive macro keys from the Corsair PBT Double-Shot kit, and one seller note on a YMDK listing says the same for the K95.

That means a full replacement set leaves the macro column in its original caps. If you want those keys to match, you would need to look for them separately, and none of the pages we read confirm a source for matching macro caps, so expect a mixed look on the left side of the board.

Is the Corsair PBT Double-Shot PRO kit right for the K95 Platinum?

Corsair’s compatibility page lists the PRO kit for the K100, K60 and K65 MINI families, K70 RGB TKL and standard bottom-row keyboards with MX-style switches. The K95 Platinum is not on that list, which is why it is not a pick here. The two kits are not interchangeable.

A Corsair support representative also answered a customer on a retailer page that the original PBT Double Shot kit is the one to use with the K95 Platinum. Based on that, we left the PRO kit out of the picks.

If you are comparing the two kits, treat the original kit as the K95 choice and the PRO kit as the standard-bottom-row choice.

Why did the HyperX FPS and MOBA keycaps miss this list?

HyperX announced FPS and MOBA keycap kits in red and titanium, with the eight keys Q, E, R, F and W, A, S, D, and said they fit Cherry MX style switches. Those details come from news coverage and a retailer answer rather than a manufacturer page we could open, so treat the details as secondhand.

Best Buy listings for both colors say the items are no longer available in new condition, so we did not rely on them as current picks. They remain a point of comparison if you find one at a reseller.

Can I use gaming keycaps if I have a different K95 model?

Check the exact model name. Corsair’s compatibility page lists the K95 RGB Platinum XT, K95 RGB Platinum and K95 RGB for the original PBT Double-Shot kit, and its FPS pudding kit says it works with all Corsair mechanical and optical-mechanical keyboards.

The HUYUN FPS listing names the K95 among compatible Corsair boards, so check the exact listing and the maker’s newest compatibility statement for your board. The name on the box matters more than the family.

Conclusion

For most K95 Platinum owners, the Corsair FPS/MOBA Pudding Keycap Mod Kit is the cleanest WASD upgrade, and the original Corsair PBT Double-Shot Keycap Kit is the safest full replacement. Treat third-party sets as optional extras, and confirm the Corsair bottom row and current stock before you order.

Related guides

Browse all Buying Guides guides →