Camera batteries drain fast on long shoots, and a dead spare ends the session. The best portable battery pack for charging camera batteries pairs a high wattage USB-C bank with a charger that tops up spares in the field. This guide compares six options on capacity, output, and fit for mirrorless and cinema kits.

Quick verdict

The Nitecore NB10000 Gen4 leads for light kits, the Anker 737 leads for heavy USB-C loads, and the SmallRig LP-E6NH charger leads for Canon spares. Pick the bank by wattage first, then by weight, since a bank that cannot feed a charger at full speed slows every top-up.

The Nitecore NB10000 Gen4 is the light pick, with 10,000 mAh in a 5 oz carbon fiber shell and dual USB-C ports at 22.5W max. The Anker 737 Power Bank gives 24,000 mAh with 140W max output for laptops and camera chargers that draw hard. The Goal Zero Sherpa 100PD kit adds a 94.7Wh bank with 100W USB-C output and a 65W charger that refills the bank in 2 hours.

The Anker Prime 27,650 mAh bank suits the biggest kits, with 250W total output and a 140W single port. The Nitecore NB20000 Gen 3 doubles the capacity of the Gen4 in the same carbon fiber line. The SmallRig LP-E6NH charger is the only dedicated camera battery charger here, with dual slots and an LCD screen, and it runs from any USB-C or USB-A source.

Product Type Best for Key spec Main limit
Nitecore NB10000 Gen4 USB-C power bank Light mirrorless kits and travel 10,000 mAh, 22.5W max dual USB-C Total output capped at 15W
Anker 737 Power Bank 24,000 mAh USB-C power bank Laptops and high draw chargers 24,000 mAh, 140W max output Maker page gives no size or weight
Goal Zero Sherpa 100PD kit USB-C power bank and charger kit All day shoots with many devices 94.7Wh, 100W USB-C output Standalone bank is sold out, kit only
Anker Prime 27,650 mAh 250W USB-C power bank Big kits with laptops and lights 27,650 mAh, 250W total output Maker page gives no size or weight
Nitecore NB20000 Gen 3 USB-C power bank Multi day trips without a wall outlet 20,000 mAh, carbon fiber shell Input capped at 18W max
SmallRig LP-E6NH Battery Charger Dual-slot camera battery charger Canon LP-E6NH spares in the field Dual slots, LCD screen, USB-C input Needs a separate USB power source

How we selected the best portable battery pack for charging camera batteries

We ranked packs by USB-C output wattage, capacity, and charger fit, since a camera battery charger draws a steady load and a weak bank stretches every top-up. Only packs with published figures from pages we opened made the list, and where a maker left a figure blank, we said so instead of guessing.

Output wattage came first. A dual-slot camera charger and a laptop draw far more than a phone, so a 100W or 140W port matters when the kit runs all day. Capacity came next, because a 10,000 mAh bank tops up a few spares while a 27,650 mAh bank covers a full day of shooting. Weight and weather sealing came last, since a bank that rides in a camera bag must stay light and dry.

We also checked what each bank actually ships with. A lanyard cable, a USB-C to USB-A adapter, or a bundled 65W wall charger changes how fast the kit gets going in the field. Where a maker page showed a sold out standalone bank, we used the kit that is in stock and said so plainly, so the pick reflects what a buyer can order now.

The best portable battery pack for charging camera batteries

Six options cover camera power from light travel kits to full cinema rigs. Two Nitecore banks cover the light end, two Anker banks cover the heavy end, the Goal Zero kit covers all day use, and the SmallRig charger covers Canon spares direct. The right pick follows the wattage the kit draws.

Nitecore NB10000 Gen4

For light mirrorless kits, this carbon fiber bank is the lead pick. It offers 10,000 mAh in a 5 oz shell with dual USB-C ports, so it slips into a camera bag pocket and tops up spares without adding real weight to the kit. The 22.5W ports suit a dual-slot charger, while the IPX7 shell suits rain on location.

The maker lists 10,000 mAh at 3.9V, which is 39Wh, with a rated energy of 6,800 mAh at 5V with a 3A draw and 7,200 mAh at 5V with a 1A draw. Both USB-C ports give 22.5W max, while total output is capped at 15W max. The shell is IPX7 rated, the size is 4.57 x 1.84 x 0.57 in, and a lanyard USB-C cable comes in the box. Pass-through charging, knock-to-wake, and RGB port lighting round out the feature list.

The weight is the headline. At 5 oz this bank is lighter than most phones, yet it carries enough energy for several camera battery top-ups through a USB-C charger. The carbon fiber shell and IPX7 rating suit outdoor shoots where rain and dust are part of the day. Dual USB-C ports mean a charger and a phone can share the bank, though the 15W total output cap means both devices split a modest pool of power.

The strengths of this bank are clear.

  • Light 5 oz carbon fiber shell that fits a camera bag pocket
  • Dual USB-C ports with 22.5W max per port
  • IPX7 rating for rain and wet field work
  • Lanyard USB-C cable included in the box

The limits deserve a note before you buy.

  • Total output is capped at 15W when both ports run together
  • Capacity of 10,000 mAh covers only a few spares per charge
  • Page text gives 4.94 oz while the spec table gives 5 oz

Buy it if you want the lightest bank that still feeds a USB-C camera charger.

Skip it if your kit needs more than 15W at once or a full day of top-ups.

Anker 737 Power Bank 24,000 mAh

For heavy USB-C loads, this 24,000 mAh bank is the pick. It offers 140W max output with PD 3.1, so it feeds a laptop and a camera charger at the same time without forcing the kit to choose between devices. The digital display shows the remaining charge, which helps a crew plan the next refill.

The maker lists 24,000 mAh with bi-directional PD 3.1 and a 140W max output, plus a smart digital display that shows the remaining charge and output. A 140W USB-C to USB-C cable comes in the box, and the warranty runs 24 months. The maker states it charges an iPhone 13 almost 5 times and an iPad Pro 12.9 about 1.3 times, which gives a sense of the energy on tap for smaller devices too.

The wattage is the reason to pick this bank. A 140W port handles the steepest USB-C charger draw in this guide, and the 24,000 mAh capacity covers a full day of camera batteries, a phone, and a tablet. The digital display takes the guesswork out of the remaining charge, which matters when the next wall outlet is hours away. This is the bank for a kit that runs a laptop alongside the camera.

The strengths of this bank are clear.

  • 140W max output with PD 3.1 for high draw chargers
  • 24,000 mAh capacity for a full day of top-ups
  • Smart digital display shows charge and output
  • 140W USB-C to USB-C cable included in the box

The limits deserve a note before you buy.

  • Maker page gives no size or weight, so pack fit is unconfirmed
  • Large capacity means a heavier carry than the light banks here
  • Port count and per-port split are not stated on the opened page

Buy it if your kit pairs a laptop with camera chargers and needs real wattage.

Skip it if you travel light and a 10,000 mAh bank covers the shoot.

Goal Zero Sherpa 100PD kit

For all day shoots with many devices, this kit is the pick. It pairs a 94.7Wh bank with a 65W wall charger, so the bank refills in 2 hours and the kit keeps running through phones, tablets, and camera chargers. Four outputs run at once, so the whole kit shares one power source on set.

The maker lists the bank at 94.7Wh, which is 14.8V and 6400 mAh, equal to 25,600 mAh at 3.7V in single-cell terms. USB-C PD output reaches 100W max, USB-C PD input reaches 60W max, each USB-A port gives 12W max, and wireless output reaches 15W max. The bank weighs 1.5 lbs, measures 7.69 x 3.81 x 1.02 in, and works from 32 to 104 degrees F. The 65W charger refills the bank in 2 hours, and the kit carries a 2-year warranty.

The kit is the point. The standalone Sherpa 100PD bank is sold out on the maker site, while this kit with the 65W charger is in stock, so the buyer gets the bank and its fastest refill in one box. Simultaneous recharge and discharge means the bank can feed a charger while it refills from the wall. The maker states the bank charges a POV camera with a 5Wh battery up to 19 times, a smartphone with a 12Wh battery up to 8 times, and a tablet with a 30Wh battery up to 3 times.

The strengths of this kit are clear.

  • 100W USB-C output for laptops and fast chargers
  • 65W wall charger refills the bank in 2 hours
  • Four outputs at once, including 15W wireless
  • Simultaneous recharge and discharge while plugged in

The limits deserve a note before you buy.

  • Standalone bank is sold out, so only the kit is in stock
  • At 1.5 lbs it is the heaviest bank in this guide
  • Maker page gives conflicting solar recharge times for the Nomad 20 panel

Buy it if you want a bank plus its fastest wall charger in one order.

Skip it if you need the lightest carry or already own a fast wall charger.

Anker Prime 27,650 mAh 250W

For the biggest kits, this 27,650 mAh bank is the pick. It offers 250W total output with a 140W single port, so it runs a laptop, a camera charger, and a light at the same time on a long shoot day. The app control and smart display keep the charge state visible during a busy shoot.

The maker lists 27,650 mAh with 250W total output across 2 USB-C ports and 1 USB-A port, plus PD 3.1 and a 140W max single-port output. A MacBook Pro 16 with the M2 Pro chip reaches 50 percent in 28 minutes, and a 140W input refills the bank in under 43 minutes. Input reaches 170W max through both USB-C ports once the bank passes 55 percent charge. ActiveShield 2.0 watches temperature, an app controls the bank over Bluetooth within 33 ft, and a smart display with sound alerts keeps the state visible.

The total output is the headline. At 250W this bank is the only one here that powers a laptop, a charger, and an accessory at the same time without a stretch. The fast refill matters too, since a bank that refills in under 43 minutes is ready for the next block of shooting after a short break. The app control and display help a busy set keep track of power without guessing.

The strengths of this bank are clear.

  • 250W total output across three ports for big kits
  • 140W single-port output for the hungriest device
  • Refills in under 43 minutes on a 140W input
  • App control and smart display with sound alerts

The limits deserve a note before you buy.

  • Maker page gives no size or weight, so pack fit is unconfirmed
  • 170W input needs both USB-C ports and a charge above 55 percent
  • Large capacity means a heavy carry for a light kit

Buy it if your kit runs a laptop and several chargers at once.

Skip it if a 24,000 mAh bank already covers the day and weight matters.

Nitecore NB20000 Gen 3

For multi day trips without a wall outlet, this 20,000 mAh bank is the pick. It doubles the capacity of the Gen4 in the same carbon fiber line, so it stretches the kit across days when the next outlet is far away. The low-current mode also tops up earbuds and small accessories that share the bag.

The maker lists 20,000 mAh in a carbon fiber shell with dual USB-C ports and a USB-C to USB-A adapter in the box. The bank weighs 10.26 oz, carries an IPX5 rating, and shows charge on 4 blue LEDs. Input reaches 18W max at 5V/3A, 9V/2A, or 12V/1.5A, and the bank supports pass-through charging plus an auto-detect low-current mode for small devices.

Capacity is the reason to pick this bank. At 20,000 mAh it holds twice the energy of the Gen4, which means twice as many camera battery top-ups before the bank itself needs a wall. The carbon fiber shell keeps the weight at 10.26 oz, which is light for the capacity, and the IPX5 rating covers rain on a trail. The low-current mode suits earbuds and small accessories that share the bag.

The strengths of this bank are clear.

  • 20,000 mAh capacity for multi day trips
  • Carbon fiber shell keeps the weight at 10.26 oz
  • IPX5 rating for rain and splashes
  • Low-current mode for small devices and earbuds

The limits deserve a note before you buy.

  • Input is capped at 18W max, so refills take longer than rivals
  • Output wattage is not stated on the opened maker page
  • At 10.26 oz it is twice the weight of the Gen4

Buy it if you need the most energy in a light carbon fiber shell.

Skip it if fast refills matter more than raw capacity.

SmallRig LP-E6NH Battery Charger

For Canon LP-E6NH spares in the field, this dual-slot charger is the pick. It charges two camera batteries at once from any USB-C or USB-A source, so it turns any power bank into a camera battery station. The LCD screen shows the charge state, so there is no guessing about which spare is ready.

The maker lists dual slots with an LCD screen that shows voltage, current, quantity, and a mAh meter. The charger has a built-in USB-A cable plus a USB-C input, and it needs at least 5V/2.1A from either input. The size is 90 x 56 x 27 mm, the weight is 65g, the shell is ABS and PC, and it works from 0 to 40 degrees C. It fits Canon EOS R, R5, and R6, the 60D through 90D, the 5D Mark II through Mark IV, the 6D and 6D Mark II, the 7D and 7D Mark II, the C700, and the XC10 and XC15. No adapter comes in the box, and the maker warns against using both inputs at once.

The dual slots are the headline. Two spares charge side by side while the camera keeps shooting on a third battery, which cuts the wait between blocks. The LCD screen shows the charge state at a glance, so there is no guessing about which spare is ready. At 65g the charger adds almost no weight to the bag, and the USB-C input means it runs from any of the banks in this guide.

The strengths of this charger are clear.

  • Dual slots charge two LP-E6NH batteries at once
  • LCD screen shows voltage, current, and mAh
  • Light 65g body that fits a camera bag pocket
  • Runs from USB-C or USB-A power sources

The limits deserve a note before you buy.

  • Needs a separate USB power source, since none is included
  • Only fits Canon LP-E6NH batteries, not other camera brands
  • Maker page lists an output figure that does not match the 7.2V battery

Buy it if you shoot Canon and want two spares charging at once.

Skip it if your camera uses a different battery or you need a charger with a built-in bank.

Buying guide

Match the bank to the charger first, then to the day. A camera battery charger draws a steady load, so the bank must hold its wattage for the whole top-up, and the capacity must cover every spare the shoot needs before the next wall outlet. Weight and weather sealing matter too, since the bank rides in a camera bag all day.

Match the output to the battery charger

Check the wattage the charger draws and pick a bank with a port above it. A dual-slot charger and a laptop draw far more than a phone, so a 100W or 140W port suits a heavy kit while a 22.5W port suits a light one. A bank with a total output cap splits power across ports, so read the total figure as well as the per-port figure.

Size the capacity for a full day

Count the spares the shoot needs and the devices that share the bank. A 10,000 mAh bank covers a few top-ups, a 20,000 mAh bank covers a long day, and a 27,650 mAh bank covers a laptop as well. A bigger bank weighs more, so carry only the capacity the day actually needs.

Check the charger input and the refill time

Look at how the bank refills, since a slow refill wastes the break between blocks. A bank with 140W input refills in under 43 minutes, while a bank with 18W input takes far longer. A kit that includes a fast wall charger, like the Goal Zero kit here, removes the guesswork from refill speed.

Plan for weight and weather

Weigh the bank against the rest of the kit, since every gram rides on the shoulder all day. A 5 oz carbon fiber bank suits a light mirrorless kit, while a 1.5 lb bank suits a cart or a car-based shoot. An IPX5 or IPX7 rating covers rain, and a bank that works below freezing suits winter shoots.

FAQ

These answers cover the questions that come up most when a shooter picks a bank for camera batteries. Each answer uses the figures the makers publish on the pages we opened. Read them before you buy, since the wattage and capacity figures decide whether the kit lasts the day.

Can a USB-C power bank charge camera batteries directly?

No, a power bank charges camera batteries through a USB charger, not by itself. The bank feeds the charger, and the charger tops up the camera battery. Pick a bank with enough wattage for the charger, then pair it with a dual-slot charger like the SmallRig LP-E6NH for Canon spares.

How much wattage does a camera battery charger need?

It depends on the charger, and the figures in this guide range from 18W input on the Nitecore NB20000 Gen 3 to 140W output on the Anker 737. A dual-slot charger draws more than a single-slot charger, and a laptop on the same bank raises the total further. Check the charger input figure before you buy the bank.

How many camera batteries will a 10,000 mAh bank top up?

It depends on the camera battery size and the bank efficiency, and the makers in this guide state phone and tablet counts instead of camera counts. The Nitecore NB10000 Gen4 lists a rated energy of 6,800 mAh at 5V with a 3A draw, which is the usable figure to plan from. Carry a second bank for a long shoot rather than guessing.

Does pass-through charging matter for camera work?

Yes, it lets the bank feed a charger while the bank itself refills from the wall. The Nitecore NB10000 Gen4, the Nitecore NB20000 Gen 3, and the Goal Zero Sherpa 100PD all support it. On a set with wall access between blocks, pass-through charging keeps the spares moving without a pause.

Conclusion

The Nitecore NB10000 Gen4 suits light kits, the Anker 737 suits heavy USB-C loads, and the SmallRig LP-E6NH charger suits Canon spares. Match the bank wattage to the charger, size the capacity to the day, and the kit stays powered from the first frame to the last. The Goal Zero kit suits all day shoots.

Related guides

Browse all Buying Guides guides →