A big screen makes PC games feel larger, but only when the projector keeps up with fast input. The best projectors for pc gaming pair low input lag with a sharp 4K image and enough brightness for a lit room. Lag and brightness decide the winner. This guide compares six current models on the specs that matter for PC play.

Quick verdict

For most PC gamers, the BenQ X3100i is the strongest all-round pick, with 4.2 ms input lag at 1080p and 240 Hz plus a bright 4K image. The Optoma UHD38x and ViewSonic PX749-4K match that low lag with more brightness, while the Epson Home Cinema 2350 suits players who want a 3LCD image.

The short version is simple: buy lag first and brightness second. A projector that answers in 4.2 ms at 1080p feels close to a monitor in fast games, while a slow one feels loose no matter how sharp its image looks. All six models here clear that bar in at least one mode, and all six show a 4K image, so the choice comes down to your room, your light, and how long you want the light source to last.

If your room is small, the BenQ X500i is the natural pick because its short throw lens builds a large image from close to the wall. If your room is bright, the 4000-lumen Optoma UHD38x or ViewSonic PX749-4K hold their image better with lights on. If you hate the idea of lamp swaps, the laser BenQ TK710 or the 4LED BenQ X3100i run for 20000 hours before the light source needs attention.

Product Type Best for Key spec Main limit
BenQ X3100i 4K DLP, 4LED All-round PC gaming 3300 ANSI lumens, 4.2 ms at 1080p 240 Hz 4K tops out at 60 Hz
BenQ X500i 4K DLP, 4LED, short throw Small rooms 2200 ANSI lumens, 0.69-0.83 throw ratio Needs a dim room
Optoma UHD38x 4K DLP, lamp Bright rooms, fast shooters 4000 lumens, 4.2 ms at 1080p 240 Hz Lamp needs replacement over time
ViewSonic PX749-4K 4K DLP, lamp Xbox and PC play 4000 ANSI lumens, 4.2 ms, USB-C input Lamp lasts 4000 hours in Normal mode
Epson Home Cinema 2350 4K PRO-UHD, 3LCD, lamp Color and streaming 2800 lumens, under 20 ms lag, 1080p 120 Hz No 4K at 120 Hz, no VRR
BenQ TK710 4K DLP, laser Long light source life 3200 ANSI lumens, 20000 hours laser life 4K tops out at 60 Hz

How we selected

The ranking rests on five published figures: input lag at each resolution, refresh rate, brightness, throw ratio, and light source life. A model had to state those numbers on its maker spec sheet or a full retailer listing to earn a place here, and every figure in this guide comes from one of those pages.

Input lag matters more than any other number for PC play because a mouse and keyboard expose delay that a gamepad hides. That is why the lag ladder gets top billing: each BenQ and ViewSonic model in this guide lists 16.7 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz, and 4.2 ms at 1080p and 240 Hz, while the Optoma UHD38x lists 4.2 ms at 1080p and 240 Hz with 16.7 ms at 4K. The Epson 2350 is the outlier with lag under 20 ms in its low latency mode.

Brightness was judged in ANSI lumens where the maker states it, and throw ratio decided which models suit small rooms. Light source type decided the long-term picture: 4LED and laser models are rated at 20000 hours, while lamp models are rated at 4000 hours in Normal mode and need a new lamp sooner. HDR support, HDMI ports, and built-in sound were noted as tiebreakers, not as headline reasons to buy.

Six projectors for PC gaming

These six models cover the main ways to play PC games on a big screen: a bright all-rounder, a short throw model for small rooms, two bright lamp models for lit rooms, a 3LCD model for color, and a laser model for long life. Read each one for who it fits, then match it to your room.

BenQ X3100i

The X3100i is the flagship of this group, and it leads on color and light source life as well as speed. Its 4LED engine is rated at 3300 ANSI lumens with 100% DCI-P3 coverage, and it runs for 20000 hours in Normal mode with no lamp to swap. That mix makes it the easiest pick for a living room PC setup.

The lag ladder is the full set: 16.7 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz, and 4.2 ms at 1080p and 240 Hz. A PC that can push 240 frames per second at 1080p gets the fastest response this group offers, while a PC that plays at 4K still gets a 16.7 ms response that feels quick in most games. The maker lists picture modes for FPS, RPG, and SPG play, plus HDR10, so each genre gets its own tuned image.

Setup is flexible for a standard throw model. The throw ratio runs 1.15 to 1.50, the zoom is 1.3x, and vertical lens shift runs 40% to 60%, so the image can move without moving the projector. Two HDMI 2.0b ports take a PC and a second source, and two 5W chamber speakers with eARC and Dolby Atmos cover sound when no soundbar is connected. An Android TV dongle comes in the box for streaming between sessions.

The limits are the ones this whole group shares. The 4K mode tops out at 60 Hz, so 4K at 120 Hz is not on the table, and the 15.0 lb weight makes it a projector you place once rather than carry around. At 3300 ANSI lumens it also wants some light control for the richest image, even though it holds up better than dimmer models with a lamp on.

  • 4.2 ms input lag at 1080p and 240 Hz
  • 3300 ANSI lumens with 100% DCI-P3 coverage
  • 20000-hour light source life in Normal mode
  • Vertical lens shift and 1.3x zoom for easy placement
  • FPS, RPG, and SPG picture modes plus HDR10
  • 4K limited to 60 Hz
  • 15.0 lb weight makes it heavy to move
  • Needs some light control for the richest image

Buy it if you want the fastest all-round 4K gaming projector in this group, with strong color and a long-life light source in one box.

Skip it if your room is very small or you move the projector between rooms often, since its standard throw and weight suit a fixed setup.

BenQ X500i

The X500i is the short throw pick in this group, built for a desk or a small room where the projector sits close to the wall. Its throw ratio of 0.69-0.83 builds a large image from a short distance, and it shares the fast lag ladder of its bigger sibling.

The numbers match the X3100i where it counts for play: 16.7 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz, and 4.2 ms at 1080p and 240 Hz. The differences sit in brightness and color, with 2200 ANSI lumens and 84% DCI-P3 coverage against 95% Rec.709. That is still a sharp 4K UHD image at 3840 x 2160, and the 600,000:1 contrast ratio matches the flagship, but the dimmer output means this model wants a darker room.

The short throw design is the real reason to buy it. At 14.3 x 4.6 x 9.6 inches and 7.9 lb it sits low on a desk or a shelf close to the wall, and the 1.2x zoom plus auto keystone in both directions help square the image in a tight space. A USB-C port with DisplayPort takes a laptop feed directly, and Android 11.0 with Bluetooth 5.0 and preloaded Netflix covers streaming. Two 5W speakers and eARC with Dolby Atmos handle sound, and the 4LED light source runs 20000 hours in Normal mode and 30000 hours in ECO mode.

The trade is brightness. With 2200 ANSI lumens, a bright room washes the image out faster than on the 3300-lumen X3100i, so curtains or evening play matter more here. The 4K mode also tops out at 60 Hz, just like the rest of this group, so the fastest play still happens at 1080p.

  • Short throw ratio of 0.69-0.83 for small rooms
  • 4.2 ms input lag at 1080p and 240 Hz
  • USB-C with DisplayPort for a direct laptop feed
  • 20000-hour light source life in Normal mode
  • Android 11.0, Bluetooth 5.0, and preloaded Netflix
  • 2200 ANSI lumens needs a dim room
  • 84% DCI-P3 coverage is lower than the X3100i
  • 4K limited to 60 Hz

Buy it if you play in a small room or at a desk and need a large image from a short distance without a long throw.

Skip it if your room has strong daylight or large windows, since its brightness suits a dim room better than a bright one.

Optoma UHD38x

The UHD38x is the brightness leader of this group, with 4000 lumens that hold up with room lights on. Its Enhanced Gaming Mode drops input lag to 4.2 ms at 1080p and 240 Hz, and it still shows a 4K image with 8.3 million pixels on screen. That brightness is the reason it leads this group for daytime play.

The 4K image comes from XPR pixel shifting, which builds a 3840 x 2160 picture from a 0.47-inch DMD 1080p chip. The maker lists a 1,000,000:1 contrast ratio and HDR10 plus HLG support, and the 1080p modes run at 240 Hz with compatible PCs and 120 Hz with next-generation consoles. At 4K the lag is 16.7 ms, so competitive play belongs at 1080p while story games can stay at 4K.

The lamp is a 240W unit with a life of 4000 hours in Bright mode, 10000 hours in Eco mode, and 15000 hours in Dynamic mode, so most owners will run it in Eco or Dynamic to stretch the lamp. Two HDMI 2.0 ports take a PC and a second source, a 10W speaker covers basic sound, and the screen range runs 30 to 300 inches with a throw ratio of 1.5-1.66:1. Fan noise is listed at 26 dB typical and 28 dB maximum, which is quiet for a bright lamp model.

The limits are the usual lamp trade-offs. The lamp needs replacement over time, and the brightest mode burns through it fastest, so the 4000-lumen figure comes with a running cost that the 4LED and laser models avoid. It also has no built-in streaming apps, so a PC or a stick handles streaming, and the 8.77 lb body plus standard throw need a shelf or a mount with room behind the seating.

  • 4000 lumens for play with room lights on
  • 4.2 ms input lag at 1080p and 240 Hz
  • 1,000,000:1 contrast ratio with HDR10 and HLG
  • Fan noise of 26 dB typical
  • Screen range of 30 to 300 inches
  • Lamp needs replacement over time
  • No built-in streaming apps
  • 4K limited to 60 Hz

Buy it if you play in a bright room and want the brightest image in this group with lag that matches the best models here.

Skip it if you want a fit-and-forget light source, since the lamp will need replacement sooner than a 4LED or laser engine.

ViewSonic PX749-4K

The PX749-4K is built around Xbox play, but its 4.2 ms input lag and 240 Hz refresh rate suit a PC just as well. It pairs 4000 ANSI lumens with a USB-C input, so a laptop or handheld can feed it directly without an adapter. The maker rates it for 1440p at 120 Hz as well, which suits PC output.

The maker describes it as designed for Xbox, with 1440p at 120 Hz and up to 240 Hz refresh rate, and the spec sheet lists input lag of 4.2 ms. The picture is 4K at 3840 x 2160 with HDR and HLG support, a 12000:1 contrast ratio with SuperEco mode, and 1.07 billion colors. A Harman-tuned 10W cube speaker gives it better built-in sound than most lamp models in this group.

Placement is flexible for a standard throw model. The throw ratio runs 1.13-1.47 with 1.3x optical zoom, keystone correction runs plus or minus 40 degrees in both directions, and the image range runs 30 to 300 inches, with a 100-inch image at 2.50 m. Two HDMI 2.0 ports and a USB-C port cover a PC, a console, and a handheld, and the 3.0 kg body is the lightest full-size model in this group.

The limit is lamp life in Normal mode. The 240W UHP lamp is rated at 4000 hours in Normal mode and 20000 hours in SuperEco mode, so heavy daily play in Normal mode will need a new lamp sooner than the laser or 4LED models here. The maker also lists no lens shift, so placement relies on zoom and keystone rather than a shifting lens.

  • 4000 ANSI lumens with 4.2 ms input lag
  • 1440p at 120 Hz and up to 240 Hz refresh rate
  • USB-C input for a direct laptop or handheld feed
  • Harman-tuned 10W speaker
  • Lightest full-size model here at 3.0 kg
  • Lamp lasts 4000 hours in Normal mode
  • No lens shift listed, so placement uses zoom and keystone
  • 4K limited to 60 Hz

Buy it if you want bright 4K play with a USB-C feed and a low lag figure, especially if a console shares the setup with your PC.

Skip it if you play for long hours every day in Normal mode, since the lamp will age faster than a laser or 4LED engine.

Epson Home Cinema 2350

The Home Cinema 2350 is the only 3LCD model here, and that changes the picture in a useful way: three chips handle red, green, and blue at once, so there is no color wheel and no rainbow effect. It also brings Android TV and a low latency mode with lag under 20 ms.

The image is 4K PRO-UHD at 3840 x 2160 through pixel shifting, with a native resolution of 1080p and a 35,000:1 dynamic contrast ratio. The maker lists 2800 lumens of color brightness and 2800 lumens of white brightness, so color stays strong instead of fading when the picture gets bright. Low Latency mode runs 1080p at 120 Hz with 120 frames per second and lag under 20 ms, which is quick enough for most PC games even though it trails the 4.2 ms models.

Streaming is built in through an included Android TV dongle, with a voice remote and Bluetooth 5.0 for headphones or a soundbar. Two HDMI 2.0 inputs run at 18 Gbps, with ARC on the first input, and the 1.6x zoom plus vertical lens shift of plus or minus 60% make placement easy. The screen range runs 40 to 500 inches, the UHE lamp is rated at 4500 hours in Normal mode and 7500 hours in Eco mode, and fan noise is listed at 36 dB in Normal mode and 28 dB in Eco mode.

The limits are clear and the maker states them plainly. The listing notes that this model does not support 4K at 120 Hz, ALLM, or VRR, so a PC cannot use those features with it. Its lag under 20 ms is also the slowest of the six, and the 4K image is pixel-shifted from a 1080p native panel, reaching 4.1 million pixels rather than the 8.3 million of a full 4K DLP image.

  • 3LCD design with no color wheel and no rainbow effect
  • 2800 lumens of color and white brightness
  • Android TV dongle included with voice remote
  • Vertical lens shift of plus or minus 60%
  • 1080p at 120 Hz with lag under 20 ms
  • Slowest lag of the six at under 20 ms
  • No 4K at 120 Hz, no ALLM, no VRR
  • 4K image is pixel-shifted from 1080p native

Buy it if you want strong color, built-in streaming, and a 3LCD image with no rainbow effect for mixed gaming and movie use.

Skip it if you play fast competitive shooters on PC, since its lag trails the 4.2 ms models and it lacks VRR support.

BenQ TK710

The TK710 trades the LED engine of the X3100i for a laser, and that swap buys long life: the maker rates the laser at 20000 hours. It keeps the same low lag ladder, with 4.2 ms at 1080p and 240 Hz and 16.7 ms at 4K and 60 Hz. Its 3200 ANSI lumens keep the image bright while the laser runs.

The picture is 4K UHD at 3840 x 2160 with 3200 ANSI lumens, 95% Rec.709 coverage, and a 600,000:1 contrast ratio with HDR10 and HLG support. The laser phosphor light source holds its brightness longer than a lamp, and the 8.3 ms mode at 1080p and 120 Hz covers high frame rate play that does not need the full 240 Hz mode. A 5W speaker and eARC with Dolby Atmos 7.1-channel audio out cover sound for a basic setup.

Placement suits a fixed living room setup. The throw ratio runs 1.15 to 1.5:1 with a 100-inch screen at 10 ft, the zoom is 1.3x optical, vertical lens shift runs plus 10%, and keystone correction runs plus or minus 30 degrees in both directions. Two HDMI 2.0b ports take a PC and a console, the screen range runs 30 to 300 inches, and the body weighs 6.6 lb at 12 x 4.4 x 9.2 inches. Fan noise is listed at 31 dB in medium brightness mode.

The limits mirror the X3100i. The 4K mode tops out at 60 Hz, so the fastest play still happens at 1080p, and the listing shows no wireless connection, so a cable or a streaming stick handles network play and apps. The plus 10% lens shift is also smaller than the range on the X3100i, so the mount point needs more care.

  • Laser light source rated at 20000 hours
  • 3200 ANSI lumens with 95% Rec.709 coverage
  • 4.2 ms input lag at 1080p and 240 Hz
  • 1.3x optical zoom with vertical lens shift
  • eARC with Dolby Atmos 7.1-channel audio out
  • 4K limited to 60 Hz
  • No wireless connection listed
  • Lens shift of plus 10% is smaller than the X3100i

Buy it if you want a laser engine with long life, bright 4K, and the same low lag ladder as the flagship BenQ models.

Skip it if you need 4K at 120 Hz or a wide lens shift range, since this model offers neither.

Buying guide

Picking a gaming projector for a PC is mostly about matching the lag ladder, the brightness, and the throw distance to your room. The six models above all clear the speed bar, so the guide below sorts the trade-offs that actually change daily play. Start with lag and brightness, then check throw distance before you choose.

Input lag and refresh rate for PC gaming projectors

Input lag is the delay between a mouse click or key press and the matching action on screen, and it is the first number to check. The fastest models here list 4.2 ms at 1080p and 240 Hz, 8.3 ms at 1080p and 120 Hz, and 16.7 ms at 4K and 60 Hz, while the Epson lists lag under 20 ms in its low latency mode.

A PC has an edge over a console here because it can output 1080p at 240 Hz, which opens the fastest mode on five of the six models. Competitive shooters and fighting games gain the most from that mode, while story games and strategy titles play well at 4K and 60 Hz with 16.7 ms of lag. Note that the low lag figures apply in game modes, and extra image processing such as keystone correction can add delay, so a squared-up image from good placement beats a heavily corrected one.

Refresh rate and lag move together: a higher refresh rate shortens each frame, and a shorter frame leaves less time between input and display. That is why 240 Hz at 1080p feels quicker than 60 Hz at 4K even though the 4K image looks sharper. If you play mostly fast multiplayer games, rank the 1080p lag first; if you play mostly single-player games, rank the 4K image first.

Resolution and frame rate trade-offs

Every model here shows a 4K image, but they do not all build it the same way. The BenQ and Optoma DLP models use pixel shifting to place 8.3 million pixels on screen from a 1080p chip, while the Epson 2350 uses its own pixel shifting to reach 4.1 million pixels from a 1080p native panel.

The practical trade is resolution against frame rate. At 4K these projectors run at 60 Hz, while at 1080p they run at 120 Hz or 240 Hz, so a PC must pick sharpness or speed for each game. A strong graphics card can drive 4K at 60 frames per second in many titles, while a mid-range card will hold high frame rates more easily at 1080p. There is no wrong answer here, only a match between your card and your taste: pick 4K for slow, detailed games and 1080p for fast ones.

Also weigh the screen size. A 4K image shows its detail best on a large screen viewed from a normal distance, while a 1080p image at 240 Hz shows its speed best in fast motion. If your screen is small, the extra pixels of 4K matter less, and the high refresh rate mode may be the better use of the projector.

Brightness and room light

Brightness decides whether you can play with lights on, and the range here runs from 2200 to 4000 ANSI lumens. The Optoma UHD38x and ViewSonic PX749-4K sit at the top with 4000 lumens, the BenQ X3100i and TK710 sit in the middle at 3300 and 3200 ANSI lumens, and the Epson 2350 and BenQ X500i sit lower at 2800 and 2200 lumens.

ANSI lumens are the honest measure because they follow a set test pattern, so figures in ANSI lumens can be compared across brands. A bright room with daylight needs the top of this range, a dim room with curtains suits the middle, and a dark room suits any model here. The Epson adds a useful twist by rating color brightness and white brightness both at 2800 lumens, which means its colors hold up when the image gets bright.

Screen size also eats brightness: the same lumens spread over a 150-inch screen look dimmer than over a 100-inch screen. If you plan a very large image, favor the brighter models or add light control to the room. A light-colored wall reflects more light than a dark one, and a dedicated screen reflects it better still, so the room and the surface matter as much as the lumen figure.

Throw distance and room size

Throw ratio decides how far the projector sits from the wall for a given image size, and it is the number that rules out models before anything else. The BenQ X500i is the short throw pick with a ratio of 0.69-0.83, so it builds a large image from close to the wall in a small room or at a desk.

The standard throw models need more depth. The BenQ X3100i and TK710 share a ratio of 1.15 to 1.50, the ViewSonic PX749-4K runs 1.13-1.47 with a 100-inch image at 2.50 m, the Optoma UHD38x runs 1.5-1.66:1, and the Epson 2350 covers a 40 to 500 inch range with a 1.6x zoom. Measure the wall-to-seat distance first, then check the ratio: a long room suits the Optoma, a short room suits the BenQ X500i, and a mid-size room suits the rest.

Zoom and lens shift soften the math. The BenQ X3100i offers 1.3x zoom with vertical lens shift of 40% to 60%, the Epson offers 1.6x zoom with vertical lens shift of plus or minus 60%, and the TK710 offers 1.3x zoom with plus 10% shift. Keystone correction can fix a tilted image, but it adds processing and can add lag, so a straight mount with lens shift is the better fix when the room allows it.

Light source life and upkeep

Light source life decides how long the projector runs before its brightness fades or a part needs swapping. The 4LED BenQ X3100i and X500i are rated at 20000 hours in Normal mode, with 30000 hours in ECO mode, and the laser BenQ TK710 is rated at 20000 hours with no lamp to change.

Lamp models need more attention. The Optoma UHD38x lamp is rated at 4000 hours in Bright mode, 10000 hours in Eco mode, and 15000 hours in Dynamic mode, the ViewSonic PX749-4K lamp is rated at 4000 hours in Normal mode and 20000 hours in SuperEco mode, and the Epson 2350 lamp is rated at 4500 hours in Normal mode and 7500 hours in Eco mode. Running in Eco or Dynamic mode stretches the lamp a long way, and it also cuts fan noise on most models.

Fan noise is worth a look for desk play, since the projector sits near the player. The Optoma lists 26 dB typical, the ViewSonic lists 33 dB in Normal mode and 28 dB in Eco mode, the Epson lists 36 dB in Normal mode and 28 dB in Eco mode, and the BenQ X3100i lists 32 dB typical and 28 dB in Eco mode. A quiet Eco mode is often the best setting for a small room, even if it trims brightness a little.

FAQ

These are the questions PC players ask most when they move from a monitor to a projector. The answers stick to the specs listed for the six models above, plus general setup facts that apply to any projector. Each answer names the model or the spec behind it, so you can check the detail above.

Do the best projectors for PC gaming need a 4K signal?

No, and the fastest mode on five of the six models here is a 1080p signal, not a 4K one. The BenQ X3100i, X500i, and TK710, the Optoma UHD38x, and the ViewSonic PX749-4K all list their lowest lag at 1080p and 240 Hz, so a PC that outputs 1080p at high frame rates gets the quickest response these models offer.

A 4K signal still has a place: it gives the sharpest image for slow games, movies, and desktop work, and all six models accept it at 60 Hz. The smart way to use a gaming projector is to switch by game, with 1080p at 240 Hz for fast multiplayer titles and 4K at 60 Hz for story games. A graphics card that can push high frame rates at 1080p will feel faster than one that struggles to hold 60 frames per second at 4K.

What input lag is fast enough for PC games?

For most PC games, lag under 20 ms feels responsive, and the Epson 2350 meets that bar with lag under 20 ms in its low latency mode. For fast competitive play, the 4.2 ms mode at 1080p and 240 Hz on the BenQ, Optoma, and ViewSonic models gives a clear edge, and the 8.3 ms mode at 120 Hz sits between the two.

The number to watch is the lag at the resolution you actually play. A projector that lists 4.2 ms at 1080p but 16.7 ms at 4K is fast in one mode and ordinary in the other, so check the full ladder before you buy. Also keep game mode on and keystone correction off where possible, since extra processing can add delay on top of the listed figure.

Can a projector replace a gaming monitor?

It can replace a monitor for immersive play, but it does not match a monitor on every measure. A projector gives a 100-inch or larger image that no monitor matches, and the models here answer in 4.2 ms at their fastest, which is quick for a projector. A good monitor still wins on raw response and on play in a bright room.

The best setup for many players is both: a monitor for ranked competitive play and a projector for story games, co-op nights, and movies. If you must pick one, pick the projector when the big image matters more than the last few milliseconds, and pick the monitor when ranked play is the main use.

Do I need a screen for PC gaming?

No, a smooth light-colored wall works for a first setup, and many players start that way. A dedicated screen improves the picture by reflecting light evenly and holding contrast, and it matters more as the image gets larger or the room gets brighter. A gray screen can help in a room with some light, while a white screen suits a dark room.

Whatever surface you use, keep it flat and free of texture, since bumps and seams show up on a large image. A fixed frame screen is the tidiest long-term choice, a pull-down screen suits a shared living room, and a plain wall is fine while you learn whether big-screen play suits you.

Why does 4K stop at 60 Hz on these projectors?

The HDMI 2.0 ports on these models carry enough data for 4K at 60 Hz or 1080p at 240 Hz, but not for 4K at 120 Hz, so the maker pairs the highest resolution with the lower refresh rate. That is why every model here lists 16.7 ms at 4K and 60 Hz next to 4.2 ms at 1080p and 240 Hz.

The Epson 2350 states the limit plainly: it does not support 4K at 120 Hz, ALLM, or VRR. If 4K at 120 Hz is a must for your PC, these models are not the right pick, and a gaming monitor or a newer HDMI 2.1 projector would fit better. For most players, the 1080p at 240 Hz mode covers fast play while 4K at 60 Hz covers everything else.

Conclusion

The BenQ X3100i is the best all-round pick for PC gaming, with fast lag at every resolution and a bright 4LED image. If your room is small, take the X500i; if it is bright, take the UHD38x or PX749-4K; if you want long life, take the TK710 laser. Match the projector to your room first, and the lag figures second.

Related guides

Browse all Buying Guides guides →