A desktop PC runs out of USB ports fast once a keyboard, mouse, headset and a few drives arrive, and weak hubs then cause dropouts. This guide to the best USB hub for PC to power keyboards, headphones, etc. compares seven hubs using maker-stated ports, speeds and power, and explains when a wall adapter matters.
Quick verdict on the best USB hub for PC to power keyboards, headphones, etc.
Most desks need a hub that gives each device a dependable supply, and the clearest way to get that is a hub with its own wall adapter. Slim bus-powered hubs are tidy, but they share whatever the single computer port can give, so they suit light peripherals better than a crowded desk.
For a busy desk, the Sabrent HB-BUP7 is the balanced pick: seven ports, a 36W supply and an individual switch and LED on each port. The Sabrent HB-BU10 is the choice when you want a switch and a light for every one of ten ports, and the atolla CH-310U3 is another ten-port hub with individual on/off switches.
If you only need two or three plain peripherals, the Anker Ultra Slim 4-Port USB 3.0 Data Hub is the simplest option, but Anker itself says it does not support charging and asks you to keep the total draw low. The Anker 60W 10-Port and Sabrent HB-B7C3 add charging ports, and the UGREEN 4-Port hub is a compact model with a power input.
Quick comparison table
The table lines up all seven hubs on how they are powered, how many ports they list, the headline spec and the main trade-off. It leaves out prices and listing numbers on purpose, because those change often and need to be checked on the page where you finally buy.
| Model | Power type | Ports | Key spec | Main trade-off |
|---|---|---|---|---|
| Anker Ultra Slim 4-Port USB 3.0 Data Hub | Bus-powered, no charging | 4 USB-A | Up to 5 Gbps, 2 ft cable | Keep total draw under 900 mA |
| Anker 60W 10-Port USB 3.0 Data Hub | Wall adapter | 10 USB-A | 7 data ports and 3 charging ports | Availability varies by region |
| Sabrent HB-BU10 | Wall adapter, 60W | 10 USB-A | Individual switches and LEDs | Mixed retailer details |
| Sabrent HB-B7C3 | Wall adapter, 60W | 10 USB-A | 7 data and 3 smart charging ports | Listings differ on details |
| UGREEN 4-Port USB 3.0 Hub (50985) | Bus-powered, power input | 4 USB-A | Up to 5 Gbps, fixed cable | Adapter sold separately |
| Sabrent HB-BUP7 | Wall adapter, 36W | 7 USB-A | Individual switches and LEDs, 900 mA per port | Only seven ports |
| atolla CH-310U3 | Wall adapter, 30W | 10 USB-A | Individual on/off switches, aluminum body | 30W shared across ten ports |
A note on reading the table: the ten-port models are the ones to look at when you also want to charge phones, while the two four-port models are for a single keyboard, mouse and headset. Port counts are what the makers list, and the number you can use at once depends on the power your devices draw.
How we selected these USB hubs
The goal was a short list of real desktop hubs for a person who needs more ports for a keyboard, a headset and other peripherals, with clear information on how each hub is powered. Every spec below comes from a maker or retailer page that we read, and anything we could not confirm was left out.
What a desktop hub really has to do
A hub for a desktop PC has three jobs: add ports, keep every device connected without dropouts, and supply enough power that nothing browns out when several things draw current at once. The first job is easy to measure, but the other two depend on how the hub gets its power.
Keyboards and mice draw very little, so almost any hub runs them. Headsets, microphones, webcams, drives and phone chargers draw more, and that is where the difference between a bus-powered hub and a hub with a wall adapter shows up. We favored models whose makers say clearly which type they are.
We also looked for plain facts that matter on a desk: the port count, the stated USB speed, whether the maker lists charging ports, and whether a cable is included. Where a page did not say, we say that the maker does not state it rather than guess.
Choosing the best USB hub for PC to power keyboards, headphones, etc.
This keyword mixes two needs, so the list does too. Some people want the smallest hub that gives a couple more ports, and others want a powered hub with a lot of ports and some charging. We kept both groups, with a bias toward powered models because that is what the keyword is really asking about.
None of the maker pages we read single out headphones or headsets, so we do not claim a hub is made for them. A USB headset is just another device that draws power and uses a port, and the hub advice here is about the supply and the port count, not about audio.
Budget fit was not a selection filter, and we did not check prices. Prices and stock change quickly, so confirm both on the retailer page before buying.
What we did not count as evidence
We did not test any of these hubs, and nothing here is a hands-on result. We also did not count star ratings, review counts or benchmark numbers as evidence, because those shift and can be gamed. What you read is what the makers and retailers publish, reported as published specs.
Where retailer listings disagreed, such as on weight, dimensions or cable length, we left the number out or said that listings differ. Where a spec appeared on only one retailer page, we kept it modest and described it as stated by that listing, not as a verified fact.
Reviews that you find elsewhere may talk about real-world speed, heat or noise. Those are outside what we can state, so treat them as extra information you gather yourself before choosing.
The 7 USB hubs in detail
Each pick below covers who it suits, the specs the maker or retailer states, the limits, and a short buy-if and skip-if. The order moves from the slimmest hub to the biggest powered models, then to a compact hub with a power input, so you can find your desk size fast.
Anker Ultra Slim 4-Port USB 3.0 Data Hub
The Anker Ultra Slim 4-Port USB 3.0 Data Hub is the simplest answer for a desktop that needs a few extra ports for a keyboard, a mouse and a headset dongle. It is a data-only hub with no wall adapter, and Anker states its limits plainly on the product page, which makes it easy to judge.
Anker’s page lists four USB 3.0 Type-A ports and data speeds of up to 5 Gbps. The hub does not support charging, and for a stable connection Anker says to keep the total draw of connected devices under 900 mA. The cable is listed at 2 ft, and the page also lists a shorter 0.75 ft version, so check which one you are buying.
The pros are the small footprint, the clear power guidance and the plain four-port layout that suits a keyboard, mouse and one or two accessories. The cons are that there is no wall adapter and no charging, so a power-hungry drive or a phone charger is a poor fit. Some retailer listings also show this model as sold out, so confirm stock.
Buy it if you want a tidy hub for light peripherals and you plug in only a few devices. Skip it if you want to charge phones or run several drives, because Anker itself says the hub is not for charging.
Anker 60W 10-Port USB 3.0 Data Hub
The Anker 60W 10-Port USB 3.0 Data Hub is the pick for a desk that has outgrown a four-port hub and wants some charging too. It uses a wall adapter, and Anker’s own listing says to connect the adapter before using the hub, so it needs a free outlet near your desk.
Listings for the model, A7515, describe seven USB 3.0 data ports at 5 Gbps and three PowerIQ charging ports at up to 2.1 A each, with a total output of 60W and a 12V/5A adapter in the box. Anker states that the non-charging ports are for data transfer only.
The pros are the high port count, the three dedicated charging ports and the large power supply. The cons are that the data ports are not meant for charging, that the unit needs a wall socket, and that availability differs by store: one retailer lists it as no longer available and Anker’s EU page showed it sold out, so check your region.
Buy it if you want one hub for a keyboard, headset, drives and a few phone chargers. Skip it if you cannot confirm stock in your region or if a compact bus-powered hub would do.
Sabrent HB-BU10
The Sabrent HB-BU10 is the hub to choose when you want to cut power to one device without unplugging it. Its product name is the Sabrent 10-Port 60W USB 3.0 Hub with Individual Power Switches and LEDs, and that feature set defines it for desks with many devices.
Listings describe ten USB 3.0 Type-A ports with speeds up to 5 Gbps, compliance with USB 2.0 and 1.1, a 60W 12V/5A power adapter, and an individual power switch with a status light for each port. Retailers say the box includes a USB 3.0 cable, and that no drivers are needed on Windows, macOS or Linux. Weight and size figures differ between retailers, so we leave them out.
The pros are the per-port switches, the large supply and the ten-port count. The cons are the bulk of a ten-port body on a small desk and the mixed retailer details. The switches are useful for resetting a stuck device or turning off a light you do not want on at night.
Buy it if you want control over each port and a big supply behind it. Skip it if your desk is cramped or if you only need a handful of ports.
Sabrent HB-B7C3
The Sabrent HB-B7C3 is the older sibling in the ten-port family, with seven standard ports and three smart charging ports. It is a good fit when the hub has to feed a keyboard and headset while phones and tablets charge on the side, though its listings are less consistent.
A retailer page describes the HB-B7C3 as a 60W 10-port USB 3.0 hub with smart charging, speeds up to 5 Gbps and a total output of 60W, while other listings split the ports into seven data ports and three charging ports with up to 2.4 A each and a 12V/5A adapter. One retailer says all ten ports have their own switches and lights, while others describe the feature without a count.
The pros are the seven-plus-three layout and the large supply. The cons are the conflicting listing details, including a per-port current figure that differs between sources, so read the exact listing before buying. Treat the switch count in particular as unconfirmed until you check the page.
Buy it if you want charging ports alongside data ports in a powered hub. Skip it if you want the cleanest, best-documented feature list, in which case the HB-BU10 is clearer.
UGREEN 4-Port USB 3.0 Hub (50985)
The UGREEN 4-Port USB 3.0 Hub, sold under part number 50985, is a compact option for a desk that needs four more ports and might need extra power later. It has a power input, which many four-port hubs lack, and a fixed cable, so it can stay simple now and gain support for heavier devices later.
B&H lists it as having four USB-A ports, a USB 3.1 Gen 1 interface, an aluminum body and an integrated USB-A cable, and other listings agree on 5 Gbps speeds. UGREEN’s Canadian page says extra mains power is needed for hard drives, SSDs and other power-hungry devices, and that the adapter and its cable are sold separately. Listings disagree on cable length and housing material, so we do not state them.
The pros are the small size and the option to add power. The cons are that the adapter is a separate purchase, that listings conflict on material and cable length, and that a four-port hub fills up quickly. Check the listing for the exact model number.
Buy it if you want a compact hub with a power input for later. Skip it if you want a wall adapter in the box or more than four ports.
Sabrent HB-BUP7
The Sabrent HB-BUP7 is a seven-port powered USB 3.0 hub with a switch and a light for every port. It suits a desk that needs a keyboard, mouse, headset and a few drives or chargers on one hub, and a user who likes to turn single devices off without unplugging them.
Amazon lists seven USB 3.0 ports with data transfer up to 5 Gbps, an individual power switch and a blue LED on each port, and a 36W 12V/3A power adapter that provides up to 900 mA per port. The listing says it is backward compatible with USB 2.0 and 1.1 and supports Windows, Mac OS and Linux. The details give 4.2 by 1.9 by 0.94 inches and 14 ounces, and the box holds the hub and the adapter.
Pros: per-port switches and lights, a supply sized for seven ports and a small body. Cons: the listing names no dedicated charging ports, and seven ports may fill quickly.
Buy it if you want a compact powered hub with control over each port. Skip it if you want dedicated charging ports or ten ports.
atolla CH-310U3
The atolla CH-310U3 is a ten-port powered USB 3.0 hub with an aluminum body and individual on/off switches. It suits a crowded desk with a keyboard, mouse, drives, a printer and other peripherals, for someone who wants ten ports from a less established maker and accepts a modest power supply.
Amazon lists ten USB 3.0 data ports with speeds up to 5 Gbps, an individual on/off switch and LED for each port, and a 12V/2.5A, 30W power adapter with over-voltage and over-current protection. The details give an aluminum enclosure, 8.27 by 1.81 by 0.91 inches, 12.6 ounces and support for Windows, macOS, Chrome OS and Linux. The listing gives the warranty as 18 months in one place and 3 years in another.
Pros: ten ports, per-port switches and an aluminum body at a compact size. Cons: the 30W supply is shared across ten ports, no charging ports are listed, and the warranty figures conflict.
Buy it if you want many switchable ports on a modest supply. Skip it if you plan to charge phones from the hub or run several power-hungry drives.
Buying guide for the best USB hub for PC to power keyboards, headphones, etc.
Choosing a hub comes down to how it is powered, how many ports you need, what speed your devices need, and how it sits on the desk. The sections below cover each of those, with the common mistakes that cause dropouts, so you can match a hub to your own setup.
Powered or bus-powered: which one you need
A bus-powered hub gets all of its current from the single computer port it plugs into, and a powered hub has its own wall adapter. The difference decides whether a hub can run several devices at once without trouble, so decide this first before looking at anything else.
For a keyboard, mouse and small dongle, a bus-powered hub is fine, and the Anker Ultra Slim 4-Port is a good example. For drives, webcams, phone chargers and a crowded desk, choose a powered model such as the Sabrent or atolla units, because the adapter takes the strain off the computer port.
Whichever you choose, always connect the adapter on a powered hub before you use it, as Anker notes on its page. A powered hub that is plugged into the computer but not into the wall may behave like a weak hub.
How many ports and which USB speed
Count the devices you use every day and add two or three for guests, drives and chargers, because a hub that is already full on day one becomes annoying fast. Four ports suits a keyboard, mouse and headset, seven suits a typical desk, and ten suits a desk with drives, a webcam and phones that charge from the hub.
The hubs here list USB 3.0 speeds of up to 5 Gbps and are backward compatible with older USB 2.0 and 1.1 devices. A keyboard and a headset do not need that speed, but a fast external drive does, and all devices on a hub share the one link back to the computer.
That shared link means a powered hub does not give each port its own full-speed connection. If you copy large files to a drive, plug the drive into a computer port directly and use the hub for slower peripherals.
Charging ports and what they mean
Some hubs list dedicated charging ports, such as the three on the Anker 60W 10-Port and Sabrent HB-B7C3. Those ports are intended for charging, while ordinary data ports are meant for data and may not charge well at all, so read the port labels on each listing.
Anker says plainly that the non-charging ports on its 10-port hub are for data transfer only. If charging a phone matters to you, choose a hub with listed charging ports and expect those ports to share the total output of the supply.
The Anker Ultra Slim 4-Port does not support charging at all. Use it for peripherals and keep phones on a dedicated charger.
Cable length, placement and wireless dongles
A short fixed cable puts the hub right next to the computer, while a longer cable lets you place it on the desk top. The Anker Ultra Slim lists a 2 ft cable, the TP-Link UH700 page lists a 1 m cable, and others use a separate cable that you route yourself.
If a wireless dongle such as a keyboard or mouse receiver drops out near the hub, move it to a computer port or on a short extension cable away from the hub.
Leave air around powered hubs, keep the adapter cable out of the way of other leads, and label which port is which if your hub has switches.
Common mistakes to avoid
The most common mistake is plugging a power-hungry device into a bus-powered hub and then blaming the device when it disconnects. Anker’s own guidance of keeping total draw under 900 mA on its slim hub shows how tight the budget of a small hub can be.
Another mistake is chaining several hubs together, which splits the same limited supply and link among more devices. Buy one hub with enough ports instead. A third mistake is ignoring the model number, since hubs with similar names, such as the Sabrent 7-port and 10-port models, have different specs.
Finally, remember that port counts and speeds are maker claims. Check the exact listing for the revision you are buying, and keep the box and adapter together in case you need support.
Frequently asked questions
These answers cover what people usually ask before buying a hub for a desktop PC: whether a hub can power a keyboard and headset, whether a powered model is worth the extra cable, what speed to expect, and why a well-known hub is not on this list at all.
Can a USB hub power a keyboard and headphones?
Yes, a hub can connect a keyboard and a USB headset, since both are ordinary USB devices that use a port and some current. The maker pages we read do not single out headphones, so we do not claim any hub is made for them, but the hubs here list standard USB-A ports.
If your headphones connect by a 3.5 mm plug or Bluetooth, they do not use the hub at all. For USB headsets and microphones, a powered hub gives the safest supply, and a bus-powered hub is fine when the total draw is small.
Do I need a powered USB hub?
You need a powered hub when you plan to connect drives, a webcam, several chargers or many devices at once. For a keyboard and mouse alone, a bus-powered model such as the Anker Ultra Slim 4-Port is enough, and the powered models would be more than you need.
A good rule is to add up what you plan to plug in. If the total is more than a few light peripherals, take a powered hub and plug its adapter in before you connect the hub to the computer.
Why did the TP-Link UH700 miss this list?
The TP-Link USB 3.0 7-Port Hub, model UH700, is a well-known powered hub, and its maker page lists seven USB 3.0 ports, a 12V 2.5A adapter and a 1 m cable. We left it off because that same page marks the hub as End of Life, meaning the maker no longer sells it.
This list is limited to models the makers still sell. If you find a UH700 in stock at a retailer, its specs are solid, but you may get an old or limited supply, so a hub still in the maker’s range is the safer buy.
Will a hub slow down my USB devices?
A hub shares one link to the computer among every device on it, so heavy use of several fast devices at once can feel slower than using separate computer ports. Keyboards, mice and headsets are light users, so you should not notice any change in daily use.
The hubs here are listed at up to 5 Gbps, and actual speed depends on the connected device and the port on your PC. For a fast drive, use a direct computer port and keep the hub for slower peripherals.
Are these hubs safe for charging a phone?
Only the ports that the maker lists as charging ports are meant for that job, and the number differs by model and by maker, so read each listing. Anker lists three charging ports at up to 2.1 A each on its 10-port hub, and Sabrent lists three charging ports on the HB-B7C3.
The Anker Ultra Slim 4-Port does not support charging, so do not use it for that. For any hub, use the supply that came with it and follow the maker’s guidance. For questions about a specific device, check that device’s manual.
Conclusion
For most desks, a powered hub is the safer choice, and the Sabrent HB-BUP7 and HB-BU10 are the best starting points because both pair a wall adapter with plenty of ports. Choose the Anker Ultra Slim 4-Port for a few light peripherals, and re-check stock, specs and price on the buying page before you order.
Write Your Review
No reviews yet. Be the first to share your experience!